Re: [PATCH 4/5] ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 30.06.2017 15:57, Ludovic Desroches wrote:
> On Fri, Jun 30, 2017 at 03:38:22PM +0300, m18063 wrote:
>> Hi Ludovic,
>>
>> On 29.06.2017 17:58, Ludovic Desroches wrote:
>>> On Thu, Jun 29, 2017 at 02:44:33PM +0300, Claudiu Beznea wrote:
>>>> Add specific DTS file and bindings for sama5d27 SoM1 board.
>>>>
>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
>>>> Signed-off-by: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
>>>> ---
>>>>  arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 ++++++++++++++++++++++++++++++
>>>>  1 file changed, 178 insertions(+)
>>>>  create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>>>>
>>>> diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>>>> new file mode 100644
>>>> index 0000000..b3af4d4
>>>> --- /dev/null
>>>> +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>>>> @@ -0,0 +1,178 @@
>>>> +/*
>>>> + * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
>>>> + *
>>>> + *  Copyright (c) 2017, Microchip Technology Inc.
>>>> + *                2017 Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
>>>> + *                2017 Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
>>>> + *
>>>> + * This file is dual-licensed: you can use it either under the terms
>>>> + * of the GPL or the X11 license, at your option. Note that this dual
>>>> + * licensing only applies to this file, and not this project as a
>>>> + * whole.
>>>> + *
>>>> + *  a) This file is free software; you can redistribute it and/or
>>>> + *     modify it under the terms of the GNU General Public License as
>>>> + *     published by the Free Software Foundation; either version 2 of the
>>>> + *     License, or (at your option) any later version.
>>>> + *
>>>> + *     This file is distributed in the hope that it will be useful,
>>>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>>> + *     GNU General Public License for more details.
>>>> + *
>>>> + * Or, alternatively,
>>>> + *
>>>> + *  b) Permission is hereby granted, free of charge, to any person
>>>> + *     obtaining a copy of this software and associated documentation
>>>> + *     files (the "Software"), to deal in the Software without
>>>> + *     restriction, including without limitation the rights to use,
>>>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>>>> + *     sell copies of the Software, and to permit persons to whom the
>>>> + *     Software is furnished to do so, subject to the following
>>>> + *     conditions:
>>>> + *
>>>> + *     The above copyright notice and this permission notice shall be
>>>> + *     included in all copies or substantial portions of the Software.
>>>> + *
>>>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>>>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>>>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>>>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>>>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>>>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>>>> + *     OTHER DEALINGS IN THE SOFTWARE.
>>>> + */
>>>> +#include "sama5d2.dtsi"
>>>> +#include "sama5d2-pinfunc.h"
>>>> +
>>>> +/ {
>>>> +	model = "Atmel SAMA5D27 SoM1";
>>>> +	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
>>>> +
>>>> +	clocks {
>>>> +		slow_xtal {
>>>> +			clock-frequency = <32768>;
>>>> +		};
>>>> +
>>>> +		main_xtal {
>>>> +			clock-frequency = <24000000>;
>>>> +		};
>>>> +	};
>>>> +
>>>> +	ahb {
>>>> +		apb {
>>>> +			qspi1: spi@f0024000 {
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&pinctrl_qspi1_default>;
>>>> +				flash@0 {
>>>> +					#address-cells = <1>;
>>>> +					#size-cells = <1>;
>>>> +					compatible = "jedec,spi-nor";
>>>> +					reg = <0>;
>>>> +					spi-max-frequency = <83000000>;
>>>> +					m25p,fast-read;
>>>> +
>>>> +					at91bootstrap@00000000 {
>>>> +						label = "at91bootstrap";
>>>> +						reg = <0x00000000 0x00010000>;
>>>> +					};
>>>> +
>>>> +					bootloaderenv@00010000 {
>>>> +						label = "bootloader env";
>>>> +						reg = <0x00010000 0x00010000>;
>>>> +					};
>>>> +
>>>> +					bootloader@00020000 {
>>>> +						label = "bootloader";
>>>> +						reg = <0x00020000 0x00050000>;
>>>> +					};
>>>> +
>>>> +					dtb@00070000 {
>>>> +						label = "device tree";
>>>> +						reg = <0x00070000 0x00010000>;
>>>> +					};
>>>> +
>>>> +					kernel@00080000 {
>>>> +						label = "kernel";
>>>> +						reg = <0x00080000 0x00380000>;
>>>> +					};
>>>
>>> I am wondering if it's a good idea to give the flash map here. If we
>>> take a kernel generated by a sama5_defconfig, it is about 3.8 MB.
>> The flash size here is 8MB. With kernel image of 3.8M, bootloader of 18KB,
>> u-boot of 2.2MB, dtb of 31K it will still fit.
> 
> Right it can fit, I mean the description gives about 3.5 MB for the kernel so
> you can extend it.
You're right. It should be changed. I will do it in v2.
> 
> Regards
> 
> Ludovic
> 
>>>
>>>> +				};
>>>> +			};
>>>> +
>>>> +			macb0: ethernet@f8008000 {
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&pinctrl_macb0_default>;
>>>> +				phy-mode = "rmii";
>>>> +
>>>> +				ethernet-phy@1 {
>>>> +					reg = <0x1>;
>>>> +					interrupt-parent = <&pioA>;
>>>> +					interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
>>>
>>> Are you sure about this value? pinctrl tells PD31 so 127. By the way, it
>>> is better to use macros: PIN_PD31.
>> Yes, here is a mistake. It has to be PIN_PD31. I will fix it in v2.
>>
>> Thank you,
>> Claudiu
>>>
>>> Regards
>>>
>>> Ludovic
>>>
>>>> +					pinctrl-names = "default";
>>>> +					pinctrl-0 = <&pinctrl_macb0_phy_irq>;
>>>> +				};
>>>> +			};
>>>> +
>>>> +			i2c0: i2c@f8028000 {
>>>> +				dmas = <0>, <0>;
>>>> +				pinctrl-names = "default";
>>>> +				pinctrl-0 = <&pinctrl_i2c0_default>;
>>>> +				i2c-sda-hold-time-ns = <350>;
>>>> +				status = "disabled";
>>>> +
>>>> +				24aa@50 {
>>>> +					compatible = "24mac602";
>>>> +					reg = <0x50>;
>>>> +					pagesize = <8>;
>>>> +					start-offset = /bits/ 8 <0xf8>;
>>>> +					read-only;
>>>> +				};
>>>> +			};
>>>> +
>>>> +			pinctrl@fc038000 {
>>>> +
>>>> +				pinctrl_i2c0_default: i2c0_default {
>>>> +					pinmux = <PIN_PD21__TWD0>,
>>>> +						 <PIN_PD22__TWCK0>;
>>>> +					bias-disable;
>>>> +				};
>>>> +
>>>> +				pinctrl_macb0_default: macb0_default {
>>>> +					pinmux = <PIN_PD9__GTXCK>,
>>>> +						 <PIN_PD10__GTXEN>,
>>>> +						 <PIN_PD11__GRXDV>,
>>>> +						 <PIN_PD12__GRXER>,
>>>> +						 <PIN_PD13__GRX0>,
>>>> +						 <PIN_PD14__GRX1>,
>>>> +						 <PIN_PD15__GTX0>,
>>>> +						 <PIN_PD16__GTX1>,
>>>> +						 <PIN_PD17__GMDC>,
>>>> +						 <PIN_PD18__GMDIO>;
>>>> +					bias-disable;
>>>> +				};
>>>> +
>>>> +				pinctrl_macb0_phy_irq: macb0_phy_irq {
>>>> +					pinmux = <PIN_PD31__GPIO>;
>>>> +					bias-disable;
>>>> +				};
>>>> +
>>>> +				pinctrl_qspi1_default: qspi1_default {
>>>> +					sck_cs {
>>>> +						pinmux = <PIN_PB5__QSPI1_SCK>,
>>>> +							 <PIN_PB6__QSPI1_CS>;
>>>> +						bias-disable;
>>>> +					};
>>>> +
>>>> +					data {
>>>> +						pinmux = <PIN_PB7__QSPI1_IO0>,
>>>> +							 <PIN_PB8__QSPI1_IO1>,
>>>> +							 <PIN_PB9__QSPI1_IO2>,
>>>> +							 <PIN_PB10__QSPI1_IO3>;
>>>> +						bias-pull-up;
>>>> +					};
>>>> +				};
>>>> +			};
>>>> +		};
>>>> +	};
>>>> +};
>>>> -- 
>>>> 2.7.4
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux