On 06/08/2017 05:34 PM, Stefan Agner wrote: > The rawnand clock gate gates two clocks, NAND_USDHC_BUS_CLK_ROOT > and NAND_CLK_ROOT. However, the gate has been in the chain of the > latter only. This does not allow to use the NAND_USDHC_BUS_CLK_ROOT > only, e.g. as required by APBH-Bridge-DMA. > > Add new clocks which represent the clock after the gate, and use a > shared clock gate to correctly model the hardware. > > Signed-off-by: Stefan Agner <stefan@xxxxxxxx> > Tested-by: Fabio Estevam <fabio.estevam@xxxxxxx> Acked-by: Han Xu <han.xu@xxxxxxx> > --- > drivers/clk/imx/clk-imx7d.c | 6 ++++-- > include/dt-bindings/clock/imx7d-clock.h | 4 +++- > 2 files changed, 7 insertions(+), 3 deletions(-) > > diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c > index 93b0364..e364060 100644 > --- a/drivers/clk/imx/clk-imx7d.c > +++ b/drivers/clk/imx/clk-imx7d.c > @@ -25,6 +25,7 @@ > static u32 share_count_sai1; > static u32 share_count_sai2; > static u32 share_count_sai3; > +static u32 share_count_nand; > > static struct clk_div_table test_div_table[] = { > { .val = 3, .div = 1, }, > @@ -748,7 +749,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node) > clks[IMX7D_ENET2_TIME_ROOT_DIV] = imx_clk_divider2("enet2_time_post_div", "enet2_time_pre_div", base + 0xa880, 0, 6); > clks[IMX7D_ENET_PHY_REF_ROOT_DIV] = imx_clk_divider2("enet_phy_ref_post_div", "enet_phy_ref_pre_div", base + 0xa900, 0, 6); > clks[IMX7D_EIM_ROOT_DIV] = imx_clk_divider2("eim_post_div", "eim_pre_div", base + 0xa980, 0, 6); > - clks[IMX7D_NAND_ROOT_DIV] = imx_clk_divider2("nand_post_div", "nand_pre_div", base + 0xaa00, 0, 6); > + clks[IMX7D_NAND_ROOT_CLK] = imx_clk_divider2("nand_root_clk", "nand_pre_div", base + 0xaa00, 0, 6); > clks[IMX7D_QSPI_ROOT_DIV] = imx_clk_divider2("qspi_post_div", "qspi_pre_div", base + 0xaa80, 0, 6); > clks[IMX7D_USDHC1_ROOT_DIV] = imx_clk_divider2("usdhc1_post_div", "usdhc1_pre_div", base + 0xab00, 0, 6); > clks[IMX7D_USDHC2_ROOT_DIV] = imx_clk_divider2("usdhc2_post_div", "usdhc2_pre_div", base + 0xab80, 0, 6); > @@ -825,7 +826,8 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node) > clks[IMX7D_ENET2_TIME_ROOT_CLK] = imx_clk_gate4("enet2_time_root_clk", "enet2_time_post_div", base + 0x4510, 0); > clks[IMX7D_ENET_PHY_REF_ROOT_CLK] = imx_clk_gate4("enet_phy_ref_root_clk", "enet_phy_ref_post_div", base + 0x4520, 0); > clks[IMX7D_EIM_ROOT_CLK] = imx_clk_gate4("eim_root_clk", "eim_post_div", base + 0x4160, 0); > - clks[IMX7D_NAND_ROOT_CLK] = imx_clk_gate4("nand_root_clk", "nand_post_div", base + 0x4140, 0); > + clks[IMX7D_NAND_RAWNAND_CLK] = imx_clk_gate2_shared2("nand_rawnand_clk", "nand_root_clk", base + 0x4140, 0, &share_count_nand); > + clks[IMX7D_NAND_USDHC_BUS_RAWNAND_CLK] = imx_clk_gate2_shared2("nand_usdhc_rawnand_clk", "nand_usdhc_root_clk", base + 0x4140, 0, &share_count_nand); > clks[IMX7D_QSPI_ROOT_CLK] = imx_clk_gate4("qspi_root_clk", "qspi_post_div", base + 0x4150, 0); > clks[IMX7D_USDHC1_ROOT_CLK] = imx_clk_gate4("usdhc1_root_clk", "usdhc1_post_div", base + 0x46c0, 0); > clks[IMX7D_USDHC2_ROOT_CLK] = imx_clk_gate4("usdhc2_root_clk", "usdhc2_post_div", base + 0x46d0, 0); > diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h > index a7a1a50..de62a83 100644 > --- a/include/dt-bindings/clock/imx7d-clock.h > +++ b/include/dt-bindings/clock/imx7d-clock.h > @@ -450,5 +450,7 @@ > #define IMX7D_CLK_ARM 437 > #define IMX7D_CKIL 438 > #define IMX7D_OCOTP_CLK 439 > -#define IMX7D_CLK_END 440 > +#define IMX7D_NAND_RAWNAND_CLK 440 > +#define IMX7D_NAND_USDHC_BUS_RAWNAND_CLK 441 > +#define IMX7D_CLK_END 442 > #endif /* __DT_BINDINGS_CLOCK_IMX7D_H */ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html