[PATCH 1/3] usb: max3421-hcd: Add devicetree support to the driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




NOTE:
Please don't use the plain text here as a patch because it most probably is corrupted by my webmail client. Attached is a copy of the following text guaranteed to have correct tabs/spaces.
-------------------------

Before this patch the max3421-hcd driver could only use
statically linked platform data to initialize its parameters.
This prevented it from being used on systems using device
tree.

The data taken from the device tree is put into dev->platform_data
when CONFIG_OF is enabled and the device is an OpenFirmware node.

The driver's 'compatible' string is 'maxim,max3421'

Binding documentation is also added with this patch.

Signed-off-by: Alexander Amelkin <alexander@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/usb/maxim,max3421-hcd.txt  | 19 +++++
drivers/usb/host/max3421-hcd.c | 96 ++++++++++++++++++++--
 2 files changed, 110 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/maxim,max3421-hcd.txt

diff --git a/Documentation/devicetree/bindings/usb/maxim,max3421-hcd.txt b/Documentation/devicetree/bindings/usb/maxim,max3421-hcd.txt
new file mode 100644
index 0000000..a8b9faa
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/maxim,max3421-hcd.txt
@@ -0,0 +1,19 @@
+* SPI-based USB host controller Maxim Integrated max3421e
+
+Required properties:
+- compatible: must be "maxim,max3421"
+- reg: chip select number to which the max3421 chip is connected
+  (depends on master SPI controller)
+- spi-max-frequency: the operational frequency, must not exceed <26000000> +- interrupt-parent: phandle of the associated GPIO controller to which the INT line
+  of max3421e chip is connected
+- interrupts: specification of the GPIO pin (in terms of the `interrupt-parent`)
+  to which INT line of max3421e chip is connected.
+ The driver configures MAX3421E for active low level triggered interrupts.
+  Configure your 'interrupt-parent' gpio controller accordingly.
+- vbus: <GPOUTx ACTIVE_LEVEL>
+ GPOUTx is the number (1-8) of GPOUT pin of max3421e used to drive Vbus.
+  ACTIVE_LEVEL is 1 or 0.
+
+Don't forget to add pinctrl properties if you need some GPIO pins reconfigured
+for use as INT. See binding information for the pinctrl nodes.
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 369869a..f600052 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -61,6 +61,12 @@
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>

+#if defined(CONFIG_OF)
+#include <linux/of_device.h>
+
+#define MAX3421_GPOUT_COUNT 8
+#endif
+
 #include <linux/platform_data/max3421-hcd.h>

 #define DRIVER_DESC    "MAX3421 USB Host-Controller Driver"
@@ -1699,6 +1705,10 @@ max3421_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value, u16 index,
    spin_lock_irqsave(&max3421_hcd->lock, flags);

    pdata = spi->dev.platform_data;
+   if (!pdata) {
+       dev_err(&spi->dev, "Device platform data is missing\n");
+       return -EFAULT;
+   }

    switch (type_req) {
    case ClearHubFeature:
@@ -1831,20 +1841,80 @@ static struct hc_driver max3421_hcd_desc = {
    .bus_resume =       max3421_bus_resume,
 };

+#if defined(CONFIG_OF)
+static struct max3421_hcd_platform_data max3421_data;
+
+static const struct of_device_id max3421_dt_ids[] = {
+   { .compatible = "maxim,max3421", .data = &max3421_data, },
+   { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max3421_dt_ids);
+#endif
+
 static int
 max3421_probe(struct spi_device *spi)
 {
    struct max3421_hcd *max3421_hcd;
    struct usb_hcd *hcd = NULL;
    int retval = -ENOMEM;
+#if defined(CONFIG_OF)
+   struct max3421_hcd_platform_data *pdata = NULL;
+#endif

    if (spi_setup(spi) < 0) {
        dev_err(&spi->dev, "Unable to setup SPI bus");
        return -EFAULT;
    }

-   hcd = usb_create_hcd(&max3421_hcd_desc, &spi->dev,
-                dev_name(&spi->dev));
+   if (!spi->irq) {
+ dev_err(&spi->dev, "Failed to get SPI IRQ for node '%s'\n", spi->dev.of_node->full_name);
+       return -EFAULT;
+   }
+
+#if defined(CONFIG_OF)
+   if (spi->dev.of_node) {
+       /* A temporary alias structure */
+       union {
+           uint32_t value[2];
+           struct {
+               uint32_t gpout;
+               uint32_t active_level;
+           };
+       } vbus;
+
+ if(!(pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL))) { + dev_err(&spi->dev, "failed to allocate memory for private data\n");
+           retval = -ENOMEM;
+           goto error;
+       }
+       spi->dev.platform_data = pdata;
+
+ if ((retval = of_property_read_u32_array(spi->dev.of_node, "vbus", vbus.value, 2))) { + dev_err(&spi->dev, "device tree node property 'vbus' is missing\n");
+           goto error;
+       }
+       pdata->vbus_gpout = vbus.gpout;
+       pdata->vbus_active_level = vbus.active_level;
+   }
+   else
+#endif
+   pdata = spi->dev.platform_data;
+   if (!pdata) {
+ dev_err(&spi->dev, "driver configuration data is not provided\n");
+       retval = -EFAULT;
+       goto error;
+   }
+   if (pdata->vbus_active_level > 1) {
+ dev_err(&spi->dev, "vbus active level value %d is out of range (0/1)\n", pdata->vbus_active_level);
+       retval = -EINVAL;
+       goto error;
+   }
+ if (pdata->vbus_gpout < 1 || pdata->vbus_gpout > MAX3421_GPOUT_COUNT) { + dev_err(&spi->dev, "vbus gpout value %d is out of range (1..8)\n", pdata->vbus_gpout);
+       retval = -EINVAL;
+       goto error;
+   }
+ hcd = usb_create_hcd(&max3421_hcd_desc, &spi->dev, dev_name(&spi->dev));
    if (!hcd) {
        dev_err(&spi->dev, "failed to create HCD structure\n");
        goto error;
@@ -1892,6 +1962,12 @@ max3421_probe(struct spi_device *spi)
            kthread_stop(max3421_hcd->spi_thread);
        usb_put_hcd(hcd);
    }
+#if defined(CONFIG_OF)
+   if (pdata && spi->dev.platform_data == pdata) {
+       devm_kfree(&spi->dev, pdata);
+       spi->dev.platform_data = NULL;
+   }
+#endif
    return retval;
 }

@@ -1908,14 +1984,12 @@ max3421_remove(struct spi_device *spi)
        if (hcd->self.controller == &spi->dev)
            break;
    }
+
    if (!max3421_hcd) {
        dev_err(&spi->dev, "no MAX3421 HCD found for SPI device %p\n",
            spi);
        return -ENODEV;
    }
-
-   usb_remove_hcd(hcd);
-
    spin_lock_irqsave(&max3421_hcd->lock, flags);

    kthread_stop(max3421_hcd->spi_thread);
@@ -1923,8 +1997,19 @@ max3421_remove(struct spi_device *spi)

    spin_unlock_irqrestore(&max3421_hcd->lock, flags);

+#if defined(CONFIG_OF)
+   if (spi->dev.platform_data) {
+       dev_dbg(&spi->dev, "Freeing platform data structure\n");
+       devm_kfree(&spi->dev, spi->dev.platform_data);
+       spi->dev.platform_data = NULL;
+   }
+#endif
+
    free_irq(spi->irq, hcd);

+   usb_remove_hcd(hcd);
+
+
    usb_put_hcd(hcd);
    return 0;
 }
@@ -1934,6 +2019,7 @@ static struct spi_driver max3421_driver = {
    .remove     = max3421_remove,
    .driver     = {
        .name   = "max3421-hcd",
+       .of_match_table = of_match_ptr(max3421_dt_ids),
    },
 };

--
2.7.4
From 0eb4464398c8b0a336aa0305724b4b84ef2be097 Mon Sep 17 00:00:00 2001
From: Alexander Amelkin <amelkin@xxxxxxxxxx>
Date: Tue, 28 Mar 2017 20:59:06 +0300
Subject: [PATCH 1/3] usb: max3421-hcd: Add devicetree support to the driver

Before this patch the max3421-hcd driver could only use
statically linked platform data to initialize its parameters.
This prevented it from being used on systems using device
tree.

The data taken from the device tree is put into dev->platform_data
when CONFIG_OF is enabled and the device is an OpenFirmware node.

The driver's 'compatible' string is 'maxim,max3421'

Binding documentation is also added with this patch.

Signed-off-by: Alexander Amelkin <alexander@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/usb/maxim,max3421-hcd.txt  | 19 +++++
 drivers/usb/host/max3421-hcd.c                     | 96 ++++++++++++++++++++--
 2 files changed, 110 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/maxim,max3421-hcd.txt

diff --git a/Documentation/devicetree/bindings/usb/maxim,max3421-hcd.txt b/Documentation/devicetree/bindings/usb/maxim,max3421-hcd.txt
new file mode 100644
index 0000000..a8b9faa
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/maxim,max3421-hcd.txt
@@ -0,0 +1,19 @@
+* SPI-based USB host controller Maxim Integrated max3421e
+
+Required properties:
+- compatible: must be "maxim,max3421"
+- reg: chip select number to which the max3421 chip is connected
+  (depends on master SPI controller)
+- spi-max-frequency: the operational frequency, must not exceed <26000000>
+- interrupt-parent: phandle of the associated GPIO controller to which the INT line
+  of max3421e chip is connected
+- interrupts: specification of the GPIO pin (in terms of the `interrupt-parent`)
+  to which INT line of max3421e chip is connected.
+  The driver configures MAX3421E for active low level triggered interrupts.
+  Configure your 'interrupt-parent' gpio controller accordingly.
+- vbus: <GPOUTx ACTIVE_LEVEL>
+  GPOUTx is the number (1-8) of GPOUT pin of max3421e used to drive Vbus.
+  ACTIVE_LEVEL is 1 or 0.
+
+Don't forget to add pinctrl properties if you need some GPIO pins reconfigured
+for use as INT. See binding information for the pinctrl nodes.
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 369869a..f600052 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -61,6 +61,12 @@
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 
+#if defined(CONFIG_OF)
+#include <linux/of_device.h>
+
+#define MAX3421_GPOUT_COUNT 8
+#endif
+
 #include <linux/platform_data/max3421-hcd.h>
 
 #define DRIVER_DESC	"MAX3421 USB Host-Controller Driver"
@@ -1699,6 +1705,10 @@ max3421_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value, u16 index,
 	spin_lock_irqsave(&max3421_hcd->lock, flags);
 
 	pdata = spi->dev.platform_data;
+	if (!pdata) {
+		dev_err(&spi->dev, "Device platform data is missing\n");
+		return -EFAULT;
+	}
 
 	switch (type_req) {
 	case ClearHubFeature:
@@ -1831,20 +1841,80 @@ static struct hc_driver max3421_hcd_desc = {
 	.bus_resume =		max3421_bus_resume,
 };
 
+#if defined(CONFIG_OF)
+static struct max3421_hcd_platform_data max3421_data;
+
+static const struct of_device_id max3421_dt_ids[] = {
+	{ .compatible = "maxim,max3421", .data = &max3421_data, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max3421_dt_ids);
+#endif
+
 static int
 max3421_probe(struct spi_device *spi)
 {
 	struct max3421_hcd *max3421_hcd;
 	struct usb_hcd *hcd = NULL;
 	int retval = -ENOMEM;
+#if defined(CONFIG_OF)
+	struct max3421_hcd_platform_data *pdata = NULL;
+#endif
 
 	if (spi_setup(spi) < 0) {
 		dev_err(&spi->dev, "Unable to setup SPI bus");
 		return -EFAULT;
 	}
 
-	hcd = usb_create_hcd(&max3421_hcd_desc, &spi->dev,
-			     dev_name(&spi->dev));
+	if (!spi->irq) {
+		dev_err(&spi->dev, "Failed to get SPI IRQ for node '%s'\n", spi->dev.of_node->full_name);
+		return -EFAULT;
+	}
+
+#if defined(CONFIG_OF)
+	if (spi->dev.of_node) {
+		/* A temporary alias structure */
+		union {
+			uint32_t value[2];
+			struct {
+				uint32_t gpout;
+				uint32_t active_level;
+			};
+		} vbus;
+
+		if(!(pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL))) {
+			dev_err(&spi->dev, "failed to allocate memory for private data\n");
+			retval = -ENOMEM;
+			goto error;
+		}
+		spi->dev.platform_data = pdata;
+
+		if ((retval = of_property_read_u32_array(spi->dev.of_node, "vbus", vbus.value, 2))) {
+			dev_err(&spi->dev, "device tree node property 'vbus' is missing\n");
+			goto error;
+		}
+		pdata->vbus_gpout = vbus.gpout;
+		pdata->vbus_active_level = vbus.active_level;
+	}
+	else
+#endif
+	pdata = spi->dev.platform_data;
+	if (!pdata) {
+		dev_err(&spi->dev, "driver configuration data is not provided\n");
+		retval = -EFAULT;
+		goto error;
+	}
+	if (pdata->vbus_active_level > 1) {
+		dev_err(&spi->dev, "vbus active level value %d is out of range (0/1)\n", pdata->vbus_active_level);
+		retval = -EINVAL;
+		goto error;
+	}
+	if (pdata->vbus_gpout < 1 || pdata->vbus_gpout > MAX3421_GPOUT_COUNT) {
+		dev_err(&spi->dev, "vbus gpout value %d is out of range (1..8)\n", pdata->vbus_gpout);
+		retval = -EINVAL;
+		goto error;
+	}
+	hcd = usb_create_hcd(&max3421_hcd_desc, &spi->dev, dev_name(&spi->dev));
 	if (!hcd) {
 		dev_err(&spi->dev, "failed to create HCD structure\n");
 		goto error;
@@ -1892,6 +1962,12 @@ max3421_probe(struct spi_device *spi)
 			kthread_stop(max3421_hcd->spi_thread);
 		usb_put_hcd(hcd);
 	}
+#if defined(CONFIG_OF)
+	if (pdata && spi->dev.platform_data == pdata) {
+		devm_kfree(&spi->dev, pdata);
+		spi->dev.platform_data = NULL;
+	}
+#endif
 	return retval;
 }
 
@@ -1908,14 +1984,12 @@ max3421_remove(struct spi_device *spi)
 		if (hcd->self.controller == &spi->dev)
 			break;
 	}
+
 	if (!max3421_hcd) {
 		dev_err(&spi->dev, "no MAX3421 HCD found for SPI device %p\n",
 			spi);
 		return -ENODEV;
 	}
-
-	usb_remove_hcd(hcd);
-
 	spin_lock_irqsave(&max3421_hcd->lock, flags);
 
 	kthread_stop(max3421_hcd->spi_thread);
@@ -1923,8 +1997,19 @@ max3421_remove(struct spi_device *spi)
 
 	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
 
+#if defined(CONFIG_OF)
+	if (spi->dev.platform_data) {
+		dev_dbg(&spi->dev, "Freeing platform data structure\n");
+		devm_kfree(&spi->dev, spi->dev.platform_data);
+		spi->dev.platform_data = NULL;
+	}
+#endif
+
 	free_irq(spi->irq, hcd);
 
+	usb_remove_hcd(hcd);
+
+
 	usb_put_hcd(hcd);
 	return 0;
 }
@@ -1934,6 +2019,7 @@ static struct spi_driver max3421_driver = {
 	.remove		= max3421_remove,
 	.driver		= {
 		.name	= "max3421-hcd",
+		.of_match_table = of_match_ptr(max3421_dt_ids),
 	},
 };
 
-- 
2.7.4


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux