The TS pin of the TPS56217 connects to the NTC resistor in the battery pack. By default the device is setup to support a 10-kohm but can also be configured to support a 100-kohm. Add a propietry to configure the connected NTC resistor. Therefore, the charger would get the wrong temperature information. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> --- Changes since v2: - Requested by Sebastian Reichel - Get rid of common properties and only maintain ntc-type. Changes since v1: - None .../devicetree/bindings/power/supply/tps65217_charger.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt index a11072c..851f5c7 100644 --- a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt +++ b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt @@ -6,6 +6,12 @@ Required Properties: Should be <0> for the USB charger and <1> for the AC adapter. -interrupt-names: Should be "USB" and "AC" +Optional properties: +-ti,ntc-type: set the NTC type for battery temperature measurement. The value + must be 0 or 1, where: + 0 – 100k (curve 1, B = 3960) + 1 – 10k (curve 2, B = 3480) (default) + This node is a subnode of the tps65217 PMIC. Example: @@ -14,4 +20,5 @@ Example: compatible = "ti,tps65217-charger"; interrupts = <0>, <1>; interrupt-names = "USB", "AC"; + ti,ntc-type = <1>; }; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html