ZII dev board rev B has a Holt Hi8435 connected to dspi2. Add it to device tree. ZII dev board rev C does not have that, so use rev-b dts file, not common dtsi file. Signed-off-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 37f95427616f..f433465c3a7c 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -348,6 +348,25 @@ }; }; +&edma1 { + status = "okay"; +}; + +&dspi2 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi2>; + status = "okay"; + spi-num-chipselects = <2>; + + hi8435@1 { + compatible = "holt,hi8435"; + reg = <1>; + spi-max-frequency = <20000000>; + gpios = <&gpio5 3 0>; + }; +}; + &i2c0 { clock-frequency = <100000>; pinctrl-names = "default"; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html