This patch series enable OTG mode for Raspberry Pi Zero because dwc2 driver has been fixed now. Patch 1 adds a new dtsi file to setup OTG mode (could also be used for boards like RPi Zero W or the Compute Module). The second patch adds the USB PHY and was part of Raspberry Pi Zero support patch series before split up [1]. The enabling of OTG mode of RPi Zero is done by patch number 3. The last patch updates the BCM2835 defconfig. [1] - http://lists.infradead.org/pipermail/linux-rpi-kernel/2016-July/004153.html Stefan Wahren (4): ARM: dts: bcm283x: Add dtsi for OTG mode ARM: dts: bcm283x: Add generic USB PHY ARM: dts: bcm2835-rpi-zero: Enable OTG mode ARM: bcm2835_defconfig: Enable serial & ethernet USB gadget support arch/arm/boot/dts/bcm2835-rpi-zero.dts | 2 +- arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 10 ++++++++++ arch/arm/boot/dts/bcm283x.dtsi | 6 ++++++ arch/arm/configs/bcm2835_defconfig | 8 ++++++++ 4 files changed, 25 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
