The USB2 PHY in the Meson8 SoCs is identical to the one in the Meson8b and GXBB SoCs. This series adds a new compatible string for Meson8 and adjusts the Kconfig and MODULE_DESCRIPTION documentation as well as the dt-bindings accordingly. With some additional work the same driver could be used to add USB2 support to Meson6 SoCs as well. However, due to lack of a clock controller driver for Meson6 and the lack of a board Meson6 support is not part of this series (Meson6 uses internal mux and divider clocks which are provided by the USB2 PHY registers, while the newer SoCs seem to use an alternative clock called "clk_32k_altsel") Changes since v1: - split the dt-bindings and the driver changes into separate patches - rebased to apply on top of my other series "Meson GXL USB2 PHY driver" (from [0]) which means that this also applies on top of "phy: Group vendor specific phy drivers" - also update the Kconfig option name (instead of just the description) [0] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003664.html Martin Blumenstingl (2): phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++- drivers/phy/amlogic/Kconfig | 6 +++--- drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++-- 3 files changed, 8 insertions(+), 6 deletions(-) -- 2.13.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html