On Saturday 20 May 2017 07:42 PM, Martin Blumenstingl wrote: > The USB2 PHY in the Meson8 SoCs is identical to the one in the Meson8b > and GXBB SoCs. > This series adds a new compatible string for Meson8 and adjusts the > Kconfig and MODULE_DESCRIPTION documentation as well as the dt-bindings > accordingly. > > With some additional work the same driver could be used to add USB2 > support to Meson6 SoCs as well. However, due to lack of a clock > controller driver for Meson6 and the lack of a board Meson6 support > is not part of this series (Meson6 uses internal mux and divider clocks > which are provided by the USB2 PHY registers, while the newer SoCs seem > to use an alternative clock called "clk_32k_altsel") merged, thanks. -Kishon > > > Changes since v1: > - split the dt-bindings and the driver changes into separate patches > - rebased to apply on top of my other series "Meson GXL USB2 PHY driver" > (from [0]) which means that this also applies on top of "phy: Group > vendor specific phy drivers" > - also update the Kconfig option name (instead of just the description) > > > [0] http://lists.infradead.org/pipermail/linux-amlogic/2017-May/003664.html > > > Martin Blumenstingl (2): > phy: meson8b-usb2: add support for the USB PHY on Meson8 SoCs > dt-bindings: phy: meson8b-usb2-phy: add support for the Meson8 SoCs > > Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt | 3 ++- > drivers/phy/amlogic/Kconfig | 6 +++--- > drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++-- > 3 files changed, 8 insertions(+), 6 deletions(-) > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
