Add interrupt controller properties to the gpio controller nodes and extend the gpio controller DT binding documentation. Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> --- v3: - added to the patch series --- Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt | 4 ++++ arch/arm/boot/dts/meson8.dtsi | 2 ++ arch/arm/boot/dts/meson8b.dtsi | 2 ++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 4 ++++ 5 files changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index 2392557e..49a8118a 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -24,6 +24,8 @@ Required properties for sub-nodes are: when it is missing the "pull" registers are used instead - gpio-controller: identifies the node as a gpio controller - #gpio-cells: must be 2 + - interrupt-controller: identifies the node as interrupt controller + - #interrupt-cells: must be 2 === Other sub-nodes === @@ -62,6 +64,8 @@ pinctrl-bindings.txt reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; nand { diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 1962e16e..4fe73050 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -119,6 +119,8 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interupt-cells = <2>; gpio-ranges = <&pinctrl_cbus 0 0 120>; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index e48017be..16391a30 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -211,6 +211,8 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; gpio-ranges = <&pinctrl_cbus 0 0 130>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 07e405cf..e9177041 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -118,6 +118,8 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; gpio-ranges = <&pinctrl_aobus 0 0 14>; }; @@ -267,6 +269,8 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; gpio-ranges = <&pinctrl_periphs 0 14 120>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index d8e096df..344a5243 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -80,6 +80,8 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; gpio-ranges = <&pinctrl_aobus 0 0 14>; }; @@ -208,6 +210,8 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; gpio-ranges = <&pinctrl_periphs 0 14 101>; }; -- 2.13.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html