Add documentation for PCIe PHY available in MT7623 series SoCs. Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx> --- .../devicetree/bindings/phy/phy-mt7623-pcie.txt | 67 ++++++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt diff --git a/Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt b/Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt new file mode 100644 index 0000000..27a9253 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt @@ -0,0 +1,67 @@ +Mediatek MT7623 PCIe PHY +----------------------- + +Required properties: + - compatible: Should contain "mediatek,mt7623-pcie-phy" + - #phy-cells: must be 0 + - clocks: Must contain an entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must be "refclk" + - resets: Must contain an entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must be "phy" + +Optional properties: + - phy-switch: The PHY on PCIe port2 is shared with USB u3phy2. If you + want to enable port2, you should contain it. + +Example: + + pcie0_phy: pciephy@1a149000 { + compatible = "mediatek,mt7623-pcie-phy"; + reg = <0 0x1a149000 0 0x1000>; + clocks = <&clk26m>; + clock-names = "pciephya_ref"; + #phy-cells = <0>; + status = "disabled"; + }; + + pcie1_phy: pciephy@1a14a000 { + compatible = "mediatek,mt7623-pcie-phy"; + reg = <0 0x1a14a000 0 0x1000>; + clocks = <&clk26m>; + clock-names = "pciephya_ref"; + #phy-cells = <0>; + status = "disabled"; + }; + + pcie2_phy: pciephy@1a244000 { + compatible = "mediatek,mt7623-pcie-phy"; + reg = <0 0x1a244000 0 0x1000>; + clocks = <&clk26m>; + clock-names = "pciephya_ref"; + #phy-cells = <0>; + + phy-switch = <&hifsys>; + status = "disabled"; + }; + +Specifying phy control of devices +--------------------------------- + +Device nodes should specify the configuration required in their "phys" +property, containing a phandle to the phy node and phy-names. + +Example: + +#include <dt-bindings/phy/phy.h> + +pcie: pcie@1a140000 { + ... + pcie@1,0 { + ... + phys = <&pcie0_phy>; + phy-names = "pcie-phy0"; + } + ... +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html