On Sun, Apr 23, 2017 at 04:17:33PM +0800, Ryder Lee wrote: > Add documentation for PCIe PHY available in MT7623 series SoCs. > > Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx> > --- > .../devicetree/bindings/phy/phy-mt7623-pcie.txt | 67 ++++++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt > > diff --git a/Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt b/Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt > new file mode 100644 > index 0000000..27a9253 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt > @@ -0,0 +1,67 @@ > +Mediatek MT7623 PCIe PHY > +----------------------- > + > +Required properties: > + - compatible: Should contain "mediatek,mt7623-pcie-phy" > + - #phy-cells: must be 0 > + - clocks: Must contain an entry in clock-names. > + See ../clocks/clock-bindings.txt for details. > + - clock-names: Must be "refclk" > + - resets: Must contain an entry in reset-names. > + See ../reset/reset.txt for details. > + - reset-names: Must be "phy" > + > +Optional properties: > + - phy-switch: The PHY on PCIe port2 is shared with USB u3phy2. If you > + want to enable port2, you should contain it. Need to state what the value is (i.e. a phandle to ?). Also needs a vendor prefix. > + > +Example: > + > + pcie0_phy: pciephy@1a149000 { pcie-phy@... > + compatible = "mediatek,mt7623-pcie-phy"; > + reg = <0 0x1a149000 0 0x1000>; > + clocks = <&clk26m>; > + clock-names = "pciephya_ref"; > + #phy-cells = <0>; > + status = "disabled"; Don't show status in examples. > + }; > + > + pcie1_phy: pciephy@1a14a000 { > + compatible = "mediatek,mt7623-pcie-phy"; > + reg = <0 0x1a14a000 0 0x1000>; > + clocks = <&clk26m>; > + clock-names = "pciephya_ref"; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + > + pcie2_phy: pciephy@1a244000 { > + compatible = "mediatek,mt7623-pcie-phy"; > + reg = <0 0x1a244000 0 0x1000>; > + clocks = <&clk26m>; > + clock-names = "pciephya_ref"; > + #phy-cells = <0>; > + > + phy-switch = <&hifsys>; > + status = "disabled"; > + }; > + > +Specifying phy control of devices > +--------------------------------- > + > +Device nodes should specify the configuration required in their "phys" > +property, containing a phandle to the phy node and phy-names. > + > +Example: > + > +#include <dt-bindings/phy/phy.h> > + > +pcie: pcie@1a140000 { > + ... > + pcie@1,0 { > + ... > + phys = <&pcie0_phy>; > + phy-names = "pcie-phy0"; > + } > + ... > +}; > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html