From: yong mao <yong.mao@xxxxxxxxxxxx>
Add description of mmc3 for supporting sdio feature
Signed-off-by: Yong Mao <yong.mao@xxxxxxxxxxxx>
Signed-off-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 77 +++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 1c3634f..fb8fa5c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -68,6 +68,14 @@
gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ sdio_fixed_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
+ };
};
&cec {
@@ -156,6 +164,25 @@
vqmmc-supply = <&mt6397_vmc_reg>;
};
+&mmc3 {
+ status = "okay";
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc3_pins_default>;
+ pinctrl-1 = <&mmc3_pins_uhs>;
+ bus-width = <4>;
+ max-frequency = <200000000>;
+ cap-sd-highspeed;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ mediatek,clk-pad-delay = <5>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ cap-sdio-irq;
+ vmmc-supply = <&sdio_fixed_3v3>;
+ vqmmc-supply = <&mt6397_vgp3_reg>;
+ non-removable;
+};
+
&pio {
disp_pwm0_pins: disp_pwm0_pins {
pins1 {
@@ -261,6 +288,56 @@
};
};
+ mmc3_pins_default: mmc3default {
+ pins_dat {
+ pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+ <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+ <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+ <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_cmd {
+ pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+ bias-pull-down;
+ drive-strength = <MTK_DRIVE_8mA>;
+ };
+ };
+
+ mmc3_pins_uhs: mmc3 {
+ pins_dat {
+ pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+ <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+ <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+ <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_cmd {
+ pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
usb_id_pins_float: usb_iddig_pull_up {
pins_iddig {
pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
