[PATCH] ARM: dts: rockchip: reuse firefly dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




firefly reload is very similar with firefly board, so reuse firefly dtsi

Signed-off-by: Eddie Cai <eddie.cai.linux@xxxxxxxxx>
---
 arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi | 310 ------------------
 arch/arm/boot/dts/rk3288-firefly-reload.dts       | 368 ++--------------------
 2 files changed, 34 insertions(+), 644 deletions(-)
 delete mode 100644 arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi

diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
deleted file mode 100644
index 8134966..0000000
--- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Device tree file for Firefly Rockchip RK3288 Core board
- * Copyright (c) 2016 Randy Li <ayaka@xxxxxxxxxxx>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/input/input.h>
-#include "rk3288.dtsi"
-
-/ {
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x80000000>;
-	};
-
-	ext_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
-	};
-
-
-	vcc_flash: flash-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_flash";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_io>;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	disable-wp;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	non-removable;
-	num-slots = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
-	vmmc-supply = <&vcc_io>;
-	vqmmc-supply = <&vcc_flash>;
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_MAC>;
-	assigned-clock-parents = <&ext_gmac>;
-	clock_in_out = "input";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 1000000>;
-	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
-	tx_delay = <0x30>;
-	rx_delay = <0x10>;
-	status = "ok";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	vdd_cpu: syr827@40 {
-		compatible = "silergy,syr827";
-		fcs,suspend-voltage-selector = <1>;
-		reg = <0x40>;
-		regulator-name = "vdd_cpu";
-		regulator-min-microvolt = <850000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-enable-ramp-delay = <300>;
-		regulator-ramp-delay = <8000>;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vdd_gpu: syr828@41 {
-		compatible = "silergy,syr828";
-		fcs,suspend-voltage-selector = <1>;
-		reg = <0x41>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <850000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	act8846: act8846@5a {
-		compatible = "active-semi,act8846";
-		reg = <0x5a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
-		system-power-controller;
-
-		vp1-supply = <&vcc_sys>;
-		vp2-supply = <&vcc_sys>;
-		vp3-supply = <&vcc_sys>;
-		vp4-supply = <&vcc_sys>;
-		inl1-supply = <&vcc_sys>;
-		inl2-supply = <&vcc_sys>;
-		inl3-supply = <&vcc_20>;
-
-		regulators {
-			vcc_ddr: REG1 {
-				regulator-name = "vcc_ddr";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vcc_io: REG2 {
-				regulator-name = "vcc_io";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_log: REG3 {
-				regulator-name = "vdd_log";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			vcc_20: REG4 {
-				regulator-name = "vcc_20";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			vccio_sd: REG5 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd10_lcd: REG6 {
-				regulator-name = "vdd10_lcd";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			vcca_18: REG7  {
-				regulator-name = "vcca_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcca_33: REG8 {
-				regulator-name = "vcca_33";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vcc_lan: REG9 {
-				regulator-name = "vcca_lan";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_10: REG10 {
-				regulator-name = "vdd_10";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vccio_wl: vcc_18: REG11 {
-				regulator-name = "vcc_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			vcc18_lcd: REG12 {
-				regulator-name = "vcc18_lcd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-		};
-	};
-};
-
-&io_domains {
-	status = "okay";
-
-	audio-supply = <&vccio_wl>;
-	bb-supply = <&vcc_io>;
-	dvp-supply = <&dovdd_1v8>;
-	flash0-supply = <&vcc_flash>;
-	flash1-supply = <&vcc_lan>;
-	gpio30-supply = <&vcc_io>;
-	gpio1830-supply = <&vcc_io>;
-	lcdc-supply = <&vcc_io>;
-	sdcard-supply = <&vccio_sd>;
-	wifi-supply = <&vccio_wl>;
-};
-
-&pinctrl {
-	pcfg_output_high: pcfg-output-high {
-		output-high;
-	};
-
-	pcfg_output_low: pcfg-output-low {
-		output-low;
-	};
-
-	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
-		bias-pull-up;
-		drive-strength = <12>;
-	};
-
-	act8846 {
-		pwr_hold: pwr-hold {
-			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-
-		pmic_vsel: pmic-vsel {
-			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
-		};
-	};
-
-	gmac {
-		phy_int: phy-int {
-			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		phy_pmeb: phy-pmeb {
-			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		phy_rst: phy-rst {
-			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-};
-
-&tsadc {
-	rockchip,hw-tshut-mode = <0>;
-	rockchip,hw-tshut-polarity = <0>;
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index d0b3204a..da8f219 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -1,6 +1,7 @@
 /*
  * Device tree file for Firefly Rockchip RK3288 Core board
  * Copyright (c) 2016 Randy Li <ayaka@xxxxxxxxxxx>
+ * Copyright (c) 2017 Eddie Cai <eddie.cai.linux@xxxxxxxxx>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -42,362 +43,61 @@
  */
 
 /dts-v1/;
-#include "rk3288-firefly-reload-core.dtsi"
+#include "rk3288-firefly.dtsi"
 
 / {
 	model = "Firefly-RK3288-reload";
 	compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
+};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			wakeup-source;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Power";
-			linux,code = <KEY_POWER>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwr_key>;
-		};
-	};
-
-	ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "firefly:blue:power";
-			pinctrl-names = "default";
-			pinctrl-0 = <&power_led>;
-			panic-indicator;
+&act8846 {
+	regulators {
+		/delete-node/ REG7;
+		/delete-node/ REG8;
+		/delete-node/ REG9;
+		vcca_33: REG7  {
+			regulator-name = "vcca_33";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
 		};
 
-		work {
-			gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
-			label = "firefly:blue:user";
-			linux,default-trigger = "rc-feedback";
-			pinctrl-names = "default";
-			pinctrl-0 = <&work_led>;
+		vcc_lan: REG8 {
+			regulator-name = "vcc_lan";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
 		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&hym8563>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable>;
-		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
-	};
 
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "SPDIF";
-		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
-			cpu { sound-dai = <&spdif>; };
-			codec { sound-dai = <&spdif_out>; };
+		vccio_pmu: REG9 {
+			regulator-name = "vccio_pmu";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
 		};
 	};
-
-	spdif_out: spdif-out {
-		compatible = "linux,spdif-dit";
-		#sound-dai-cells = <0>;
-	};
-
-	vcc_host_5v: usb-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&host_vbus_drv>;
-		regulator-name = "vcc_host_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vcc_5v>;
-	};
-
-	vcc_5v: vcc_sys: vsys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_sd: sdmmc-regulator {
-		compatible = "regulator-fixed";
-		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc_pwr>;
-		regulator-name = "vcc_sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
-	};
-
-	vcc_otg_5v: usb-otg-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&otg_vbus_drv>;
-		regulator-name = "vcc_otg_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vcc_5v>;
-	};
-
-	dovdd_1v8: dovdd-1v8-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dvp_pwr>;
-		regulator-name = "dovdd_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_io>;
-	};
-
-	vcc28_dvp: vcc28-dvp-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dvp_pwr>;
-		regulator-name = "vcc28_dvp";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		vin-supply = <&vcc_io>;
-	};
-
-	af_28: af_28-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dvp_pwr>;
-		regulator-name = "af_28";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		vin-supply = <&vcc_io>;
-	};
-
-	dvdd_1v2: af_28-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cif_pwr>;
-		regulator-name = "dvdd_1v2";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		vin-supply = <&vcc_io>;
-	};
-
-	vbat_wl: wifi-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat_wl";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_io>;
-	};
-};
-
-&i2c0 {
-	hym8563: hym8563@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "xin32k";
-		interrupt-parent = <&gpio7>;
-		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&rtc_int>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-
-	codec: es8328@10 {
-		compatible = "everest,es8328";
-		DVDD-supply = <&vcca_33>;
-		AVDD-supply = <&vcca_33>;
-		PVDD-supply = <&vcca_33>;
-		HPVDD-supply = <&vcca_33>;
-		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
-		clock-names = "i2s_hclk", "i2s_clk";
-		reg = <0x10>;
-	};
-};
-
-&i2s {
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	disable-wp;
-	num-slots = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
-	vmmc-supply = <&vcc_sd>;
-	vqmmc-supply = <&vccio_sd>;
-	status = "okay";
-};
-
-&sdio0 {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cap-sdio-irq;
-	disable-wp;
-	mmc-pwrseq = <&sdio_pwrseq>;
-	non-removable;
-	num-slots = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-ddr50;
-	vmmc-supply = <&vbat_wl>;
-	vqmmc-supply = <&vccio_wl>;
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
-	status = "okay";
 };
 
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
+&emmc {
+	mmc-hs200-1_8v;
 };
 
-&usbphy {
-	status = "okay";
-};
-
-&usb_host1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usbhub_rst>;
-	status = "okay";
-};
-
-&usb_otg {
-	status = "okay";
+&ir {
+	gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
 };
 
 &pinctrl {
-	ir {
-		ir_int: ir-int {
-			rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	dvp {
-		dvp_pwr: dvp-pwr {
-			rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		cif_pwr: cif-pwr {
-			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	hym8563 {
-		rtc_int: rtc-int {
-			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	keys {
-		pwr_key: pwr-key {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+	act8846 {
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
 		};
 	};
 
-	leds {
-		power_led: power-led {
-			rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		work_led: work-led {
-			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sdmmc {
-		/*
-		 * Default drive strength isn't enough to achieve even
-		 * high-speed mode on firefly board so bump up to 12ma.
-		 */
-		sdmmc_bus4: sdmmc-bus4 {
-			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
-					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
-					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
-					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
-		};
-
-		sdmmc_clk: sdmmc-clk {
-			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
-		};
-
-		sdmmc_cmd: sdmmc-cmd {
-			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
-		};
-
-		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	sdio {
-		wifi_enable: wifi-enable {
-			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb_host {
-		host_vbus_drv: host-vbus-drv {
-			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		usbhub_rst: usbhub-rst {
-			rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>;
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+};
 
-	usb_otg {
-		otg_vbus_drv: otg-vbus-drv {
-			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
+&pwm1 {
+	status = "okay";
 };
-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux