This patch adds a driver for the internal LDO1 regulator on
some Cirrus Logic Madera class codecs.
Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/regulator/madera-ldo1.txt | 29 +++
MAINTAINERS | 3 +
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/madera-ldo1.c | 198 +++++++++++++++++++++
include/linux/regulator/madera-ldo1.h | 24 +++
6 files changed, 263 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/madera-ldo1.txt
create mode 100644 drivers/regulator/madera-ldo1.c
create mode 100644 include/linux/regulator/madera-ldo1.h
diff --git a/Documentation/devicetree/bindings/regulator/madera-ldo1.txt b/Documentation/devicetree/bindings/regulator/madera-ldo1.txt
new file mode 100644
index 0000000..688f21d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/madera-ldo1.txt
@@ -0,0 +1,29 @@
+Cirrus Logic Madera class audio codecs LDO1 regulator driver
+
+Only required if you are using the codec internal LDO1 regulator.
+This is a subnode of the parent mfd node.
+
+See also the core bindings for the parent MFD driver:
+See Documentation/devicetree/bindings/mfd/madera.txt
+
+Required properties:
+ - compatible : must be "cirrus,madera-ldo1"
+ - LDOVDD-supply : Power supply for the LDO1 regulator.
+
+ - enable-gpio : GPIO to use to enable/disable the regulator.
+ As defined in bindings/gpio.txt.
+
+Optional subnodes:
+ Standard regulator bindings as described in bindings/regulator/regulator.txt
+
+Example:
+
+codec: cs47l85@0 {
+ compatible = "cirrus,cs47l85";
+
+ ldo1 {
+ compatible = "cirrus,madera-ldo1";
+ LDOVDD-supply = <&pmic_vdd1>;
+ enable-gpio = <&gpio 0>;
+ };
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index d28e53f..1207c9c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3267,9 +3267,12 @@ T: git https://github.com/CirrusLogic/linux-drivers.git
W: https://github.com/CirrusLogic/linux-drivers/wiki
S: Supported
F: Documentation/devicetree/bindings/mfd/madera.txt
+F: Documentation/devicetree/bindings/regulator/madera*
F: include/linux/mfd/madera/*
+F: include/linux/regulator/madera*
F: drivers/mfd/madera*
F: drivers/mfd/cs47l*
+F: drivers/regulator/madera*
CLEANCACHE API
M: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index be06eb2..c96d9a6 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -368,6 +368,14 @@ config REGULATOR_LTC3676
This enables support for the LTC3676
8-output regulators controlled via I2C.
+config REGULATOR_MADERA_LDO1
+ tristate "Cirrus Logic Madera codecs LDO1 regulator"
+ depends on MFD_MADERA
+ help
+ If you want to use the internal LDO1 regulator on CS47L85 and WM1840
+ to supply DCVDD you must include this driver. If you are using an
+ external DCVDD regulator you do not need this driver.
+
config REGULATOR_MAX14577
tristate "Maxim 14577/77836 regulator"
depends on MFD_MAX14577
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index ef7725e..2db3592 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
+obj-$(CONFIG_REGULATOR_MADERA_LDO1) += madera-ldo1.o
obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
diff --git a/drivers/regulator/madera-ldo1.c b/drivers/regulator/madera-ldo1.c
new file mode 100644
index 0000000..6504d6f
--- /dev/null
+++ b/drivers/regulator/madera-ldo1.c
@@ -0,0 +1,198 @@
+/*
+ * madera-ldo1.c -- Driver for the LDO1 regulator on Madera codecs
+ *
+ * Copyright 2015-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <linux/regulator/madera-ldo1.h>
+
+#include <linux/mfd/madera/core.h>
+#include <linux/mfd/madera/pdata.h>
+#include <linux/mfd/madera/registers.h>
+
+struct madera_ldo1 {
+ struct regulator_dev *regulator;
+
+ struct regulator_consumer_supply supply;
+ struct regulator_init_data init_data;
+};
+
+static const struct regulator_ops madera_ldo1_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc madera_ldo1 = {
+ .name = "LDO1",
+ .supply_name = "LDOVDD",
+ .type = REGULATOR_VOLTAGE,
+ .ops = &madera_ldo1_ops,
+
+ .vsel_reg = MADERA_LDO1_CONTROL_1,
+ .vsel_mask = MADERA_LDO1_VSEL_MASK,
+ .min_uV = 900000,
+ .uV_step = 25000,
+ .n_voltages = 13,
+ .enable_time = 3000,
+
+ .owner = THIS_MODULE,
+};
+
+static const struct regulator_init_data madera_ldo1_default = {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+};
+
+static int madera_ldo1_of_get_pdata(struct madera *madera,
+ struct regulator_config *config,
+ const struct regulator_desc *desc)
+{
+ struct madera_pdata *pdata = &madera->pdata;
+ struct madera_ldo1 *ldo1 = config->driver_data;
+ struct device_node *dcvdd_node;
+ struct regulator_init_data *init_data;
+
+ dcvdd_node = of_parse_phandle(madera->dev->of_node, "DCVDD-supply", 0);
+
+ init_data = of_get_regulator_init_data(config->dev,
+ config->dev->of_node,
+ desc);
+ if (init_data) {
+ init_data->consumer_supplies = &ldo1->supply;
+ init_data->num_consumer_supplies = 1;
+ pdata->ldo1.init_data = init_data;
+
+ /* Check whether we're supplying the codec's DCVDD */
+ if (dcvdd_node && dcvdd_node != config->dev->of_node)
+ madera->internal_dcvdd = false;
+ } else if (dcvdd_node) {
+ madera->internal_dcvdd = false;
+ }
+
+ of_node_put(dcvdd_node);
+
+ if (madera->internal_dcvdd) {
+ pdata->ldo1.ldoena = of_get_named_gpio(madera->dev->of_node,
+ "enable-gpio", 0);
+ if (pdata->ldo1.ldoena < 0)
+ if (pdata->ldo1.ldoena != -ENOENT)
+ dev_warn(madera->dev,
+ "Malformed enable-gpio ignored: %d\n",
+ pdata->ldo1.ldoena);
+ }
+
+ return 0;
+}
+
+static int madera_ldo1_probe(struct platform_device *pdev)
+{
+ struct madera *madera = dev_get_drvdata(pdev->dev.parent);
+ const struct regulator_desc *desc;
+ struct regulator_config config = { };
+ struct madera_ldo1 *ldo1;
+ int ret;
+
+ madera->internal_dcvdd = true;
+
+ ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
+ if (!ldo1)
+ return -ENOMEM;
+
+ /*
+ * Since the chip usually supplies itself we provide some
+ * default init_data for it. This will be overridden with
+ * platform data if provided.
+ */
+ desc = &madera_ldo1;
+ ldo1->init_data = madera_ldo1_default;
+
+ ldo1->init_data.consumer_supplies = &ldo1->supply;
+ ldo1->supply.supply = "DCVDD";
+ ldo1->supply.dev_name = dev_name(madera->dev);
+
+ config.dev = &pdev->dev;
+ config.of_node = config.dev->of_node;
+ config.driver_data = ldo1;
+ config.regmap = madera->regmap;
+
+ /* pdata defaults to 0 if not explicitly set. Convert to invalid. */
+ if (madera->pdata.ldo1.ldoena == 0)
+ madera->pdata.ldo1.ldoena = -EINVAL;
+
+ if (IS_ENABLED(CONFIG_OF)) {
+ if (!dev_get_platdata(madera->dev)) {
+ ret = madera_ldo1_of_get_pdata(madera, &config, desc);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ if (madera->pdata.ldo1.init_data)
+ ldo1->init_data = *madera->pdata.ldo1.init_data;
+
+ if (gpio_is_valid(madera->pdata.ldo1.ldoena)) {
+ config.ena_gpio = madera->pdata.ldo1.ldoena;
+ config.ena_gpio_initialized = true;
+ } else {
+ dev_warn(madera->dev,
+ "Running without LDOENA is not recommended\n");
+ }
+ config.ena_gpio_flags = GPIOF_OUT_INIT_LOW;
+ config.init_data = &ldo1->init_data;
+
+ /*
+ * LDO1 can only be used to supply DCVDD so if it has no
+ * consumers then DCVDD is supplied externally.
+ */
+ if (config.init_data->num_consumer_supplies == 0)
+ madera->internal_dcvdd = false;
+
+ ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config);
+
+ of_node_put(config.of_node);
+
+ if (IS_ERR(ldo1->regulator)) {
+ ret = PTR_ERR(ldo1->regulator);
+ dev_err(madera->dev, "Failed to register LDO1 supply: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct platform_driver madera_ldo1_driver = {
+ .probe = madera_ldo1_probe,
+ .driver = {
+ .name = "madera-ldo1",
+ },
+};
+
+module_platform_driver(madera_ldo1_driver);
+
+MODULE_DESCRIPTION("Madera LDO1 driver");
+MODULE_AUTHOR("Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:madera-ldo1");
diff --git a/include/linux/regulator/madera-ldo1.h b/include/linux/regulator/madera-ldo1.h
new file mode 100644
index 0000000..9435021
--- /dev/null
+++ b/include/linux/regulator/madera-ldo1.h
@@ -0,0 +1,24 @@
+/*
+ * Platform data for Madera codecs LDO1 regulator
+ *
+ * Copyright 2016-2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MADERA_LDO1_H
+#define MADERA_LDO1_H
+
+struct regulator_init_data;
+
+struct madera_ldo1_pdata {
+ /** GPIO controlling LODENA, if any */
+ int ldoena;
+
+ /** Regulator configuration for LDO1 */
+ const struct regulator_init_data *init_data;
+};
+
+#endif
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
