Re: [PATCH 06/16] regulator: madera-ldo1: LDO1 driver for Cirrus Logic Madera codecs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Apr 05, 2017 at 11:07:54AM +0100, Richard Fitzgerald wrote:
> This patch adds a driver for the internal LDO1 regulator on
> some Cirrus Logic Madera class codecs.
> 
> Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/regulator/madera-ldo1.txt  |  29 +++

cirrus-madera-ldo1.txt

Or perhaps a subdirectory. We should have done the same for arizona 
bindings.

Same question as Mark. Should this share bindings with arizona? The 
arizona one looks a bit strange, so not sure we'd want to just copy it.

>  MAINTAINERS                                        |   3 +
>  drivers/regulator/Kconfig                          |   8 +
>  drivers/regulator/Makefile                         |   1 +
>  drivers/regulator/madera-ldo1.c                    | 198 +++++++++++++++++++++
>  include/linux/regulator/madera-ldo1.h              |  24 +++
>  6 files changed, 263 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/madera-ldo1.txt
>  create mode 100644 drivers/regulator/madera-ldo1.c
>  create mode 100644 include/linux/regulator/madera-ldo1.h
> 
> diff --git a/Documentation/devicetree/bindings/regulator/madera-ldo1.txt b/Documentation/devicetree/bindings/regulator/madera-ldo1.txt
> new file mode 100644
> index 0000000..688f21d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/madera-ldo1.txt
> @@ -0,0 +1,29 @@
> +Cirrus Logic Madera class audio codecs LDO1 regulator driver
> +
> +Only required if you are using the codec internal LDO1 regulator.
> +This is a subnode of the parent mfd node.
> +
> +See also the core bindings for the parent MFD driver:
> +See Documentation/devicetree/bindings/mfd/madera.txt
> +
> +Required properties:
> +  - compatible :  must be "cirrus,madera-ldo1"
> +  - LDOVDD-supply : Power supply for the LDO1 regulator.
> +
> +  - enable-gpio	: GPIO to use to enable/disable the regulator.

enable-gpios

And define whether active high or low.

> +    As defined in bindings/gpio.txt.
> +
> +Optional subnodes:
> +  Standard regulator bindings as described in bindings/regulator/regulator.txt
> +
> +Example:
> +
> +codec: cs47l85@0 {
> +	compatible = "cirrus,cs47l85";
> +
> +	ldo1 {
> +		compatible = "cirrus,madera-ldo1";
> +		LDOVDD-supply = <&pmic_vdd1>;
> +		enable-gpio = <&gpio 0>;
> +	};
> +};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux