On Fri, Mar 24, 2017 at 10:33:20AM -0500, Alan Tull wrote:
> From: Moritz Fischer <mdf@xxxxxxxxxx>
Please use "dt-bindings: fpga: ..." for the subject.
>
> This adds the binding documentation for the Xilinx LogiCORE PR
> Decoupler soft core.
>
> Signed-off-by: Moritz Fischer <mdf@xxxxxxxxxx>
> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
> Acked-by: Alan Tull <atull@xxxxxxxxxx>
I'm confused why you are sending these instead of Moritz? If it goes
through you, then it should have your S-o-B too.
> Cc: Sören Brinkmann <soren.brinkmann@xxxxxxxxxx>
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
> .../bindings/fpga/xilinx-pr-decoupler.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
>
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> new file mode 100644
> index 000000000000..2c527ac30398
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> @@ -0,0 +1,35 @@
> +Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> +
> +The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
> +decouplers / fpga bridges.
> +The controller can decouple/disable the bridges which prevents signal
> +changes from passing through the bridge. The controller can also
> +couple / enable the bridges which allows traffic to pass through the
> +bridge normally.
> +
> +The Driver supports only MMIO handling. A PR region can have multiple
> +PR Decouplers which can be handled independently or chained via decouple/
> +decouple_status signals.
> +
> +Required properties:
> +- compatible : Should contain "xlnx,pr-decoupler-1.00" or "xlnx,pr-decoupler"
I'd drop xlnx,pr-decoupler, but in any case, it should not be OR rather
"followed by". Plus the example has both.
> +- regs : base address and size for decoupler module
> +- clocks : input clock to IP
> +- clock-names : should contain "aclk"
> +
> +Optional properties:
> +- bridge-enable : 0 if driver should disable bridge at startup
> + 1 if driver should enable bridge at startup
> + Default is to leave bridge in current state.
> +
> +See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
> +
> +Example:
> + fpga-bridge@100000450 {
> + compatible = "xlnx,pr-decoupler-1.00",
> + "xlnx-pr-decoupler";
> + regs = <0x10000045 0x10>;
> + clocks = <&clkc 15>;
> + clock-names = "aclk";
> + bridge-enable = <0>;
> + };
> --
> 2.11.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
