The mpu9250 is a SIP containing an mpu6500 and an ak8975. If this was all there was too it there would be no need for explicit handling in the driver. Arguably the bindings would also only reflect the presence of an mpu6500 with the ak8975 hanging off it, as the kernel doesn't care that they are in one package. However, the WHOAMI value changes as well so best to add explicit support. Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxxx> --- Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt | 2 +- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 6 ++++++ drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 5 +++++ drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 ++ drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 1 + 5 files changed, 15 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt index e18e04f3c6f4..10c1abdcc34d 100644 --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt @@ -4,7 +4,7 @@ http://www.invensense.com/mems/gyro/mpu6050.html Required properties: - compatible : should be "invensense,mpu6050", "invensense,mpu6500", - "invensense,mpu9150" or "invensense,icm20608" + "invensense,mpu9150", "invensense,mpu9250" or "invensense,icm20608" - reg : the I2C address of the sensor - interrupt-parent : should be the phandle for the interrupt controller - interrupts : interrupt mapping for GPIO IRQ diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index b9fcbf18aa99..96dabbd2f004 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -114,6 +114,12 @@ static const struct inv_mpu6050_hw hw_info[] = { .config = &chip_config_6050, }, { + .whoami = INV_MPU9250_WHOAMI_VALUE, + .name = "MPU9250", + .reg = ®_set_6500, + .config = &chip_config_6050, + }, + { .whoami = INV_ICM20608_WHOAMI_VALUE, .name = "ICM20608", .reg = ®_set_6500, diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c index a8e6330cb906..64b5f5b92200 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c @@ -178,6 +178,7 @@ static const struct i2c_device_id inv_mpu_id[] = { {"mpu6050", INV_MPU6050}, {"mpu6500", INV_MPU6500}, {"mpu9150", INV_MPU9150}, + {"mpu9250", INV_MPU9250}, {"icm20608", INV_ICM20608}, {} }; @@ -198,6 +199,10 @@ static const struct of_device_id inv_of_match[] = { .data = (void *)INV_MPU9150 }, { + .compatible = "invensense,mpu9250", + .data = (void *)INV_MPU9250 + }, + { .compatible = "invensense,icm20608", .data = (void *)INV_ICM20608 }, diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index f0e8c5dd9fae..ef13de7a2c20 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -70,6 +70,7 @@ enum inv_devices { INV_MPU6500, INV_MPU6000, INV_MPU9150, + INV_MPU9250, INV_ICM20608, INV_NUM_PARTS }; @@ -226,6 +227,7 @@ struct inv_mpu6050_state { #define INV_MPU6050_WHOAMI_VALUE 0x68 #define INV_MPU6500_WHOAMI_VALUE 0x70 #define INV_MPU9150_WHOAMI_VALUE 0x68 +#define INV_MPU9250_WHOAMI_VALUE 0x71 #define INV_ICM20608_WHOAMI_VALUE 0xAF /* scan element definition */ diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c index 6e6476dfa188..74506e5ac0db 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c @@ -82,6 +82,7 @@ static const struct spi_device_id inv_mpu_id[] = { {"mpu6000", INV_MPU6000}, {"mpu6500", INV_MPU6500}, {"mpu9150", INV_MPU9150}, + {"mpu9250", INV_MPU9250}, {"icm20608", INV_ICM20608}, {} }; -- 2.12.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
