Hello Akshay,
Am 17.03.2017 um 08:39 schrieb Wolfgang Grandegger:
Hello Akshay,
Am 16.03.2017 um 23:29 schrieb Akshay Bhat:
Hi Wolfgang,
On 03/16/2017 04:02 PM, Wolfgang Grandegger wrote:
Looks much better now! There are message for state changes to error
warning and passive. Just the following message is not correct:
(000.200824) can0 20000004 [8] 00 40 00 00 00 00 5F 19
ERRORFRAME
controller-problem{}
error-counter-tx-rx{{95}{25}}
Sorry, forgot to mention... the function can_change_state() [1]
should be used for that purpose, if possible. It fixes the issue
above as well.
The updated driver (the one used to create the above log) is using
can_change_state() function. data[1] 40 corresponds to
CAN_ERR_CRTL_ACTIVE, so looks correct? Could it be that the can-utils I
am using is old and not reporting state change?
Hm, yes. The raw data looks correct. You could download and build a
recent version from "https://github.com/linux-can/can-utils"; to check.
It could also be a bug.
Support for that flags has been added in December 2014.
Wolfgang-
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
