Add documentation for the bindings of the high speed SPI controller found
on newer bcm63xx SoCs.
Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>
---
Changes v1 -> v2
* made the pll clock required
* added "High speed" (HS) to the first line
.../devicetree/bindings/spi/spi-bcm63xx-hsspi.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
new file mode 100644
index 000000000000..37b29ee13860
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-bcm63xx-hsspi.txt
@@ -0,0 +1,33 @@
+Binding for Broadcom BCM6328 High Speed SPI controller
+
+Required properties:
+- compatible: must contain of "brcm,bcm6328-hsspi".
+- reg: Base address and size of the controllers memory area.
+- interrupts: Interrupt for the SPI block.
+- clocks: phandles of the SPI clock and the PLL clock.
+- clock-names: must be "hsspi", "pll".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Optional properties:
+- num-cs: some controllers have less than 8 cs signals. Defaults to 8
+ if absent.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+ spi@10001000 {
+ compatible = "brcm,bcm6328-hsspi";
+ reg = <0x10001000 0x600>;
+
+ interrupts = <29>;
+
+ clocks = <&clkctl 9>, <&hsspi_pll>;
+ clock-names = "hsspi", "pll";
+
+ num-cs = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
