The HSSPI block actually has two clock inputs, one for gating the block,
and one for the PLL rate. To allow these to be represented as two clocks,
add support for retrieving the rate from a separate "pll" clock, if the
"hsspi" clock does not provide one.
Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>
Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
Changes v1 -> v2:
* Rewrote commmit message after confirmation from Florian
* Added Florian's Ack
drivers/spi/spi-bcm63xx-hsspi.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index 55789f7cda92..79096d17ebde 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -351,8 +351,16 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
return PTR_ERR(clk);
rate = clk_get_rate(clk);
- if (!rate)
- return -EINVAL;
+ if (!rate) {
+ struct clk *pll_clk = devm_clk_get(dev, "pll");
+
+ if (IS_ERR(pll_clk))
+ return PTR_ERR(pll_clk);
+
+ rate = clk_get_rate(pll_clk);
+ if (!rate)
+ return -EINVAL;
+ }
ret = clk_prepare_enable(clk);
if (ret)
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
