On Thu, Feb 16, 2017 at 07:36:48AM +0100, Richard Leitner wrote: > On 02/16/2017 03:30 AM, Rob Herring wrote: > > On Fri, Feb 10, 2017 at 09:19:27AM +0100, Richard Leitner wrote: > > > This patch adds a driver for configuration of the Microchip USB251xB/xBi > > > USB 2.0 hub controller series with USB 2.0 upstream connectivity, SMBus > > > configuration interface and two to four USB 2.0 downstream ports. > > > > > > Furthermore add myself as a maintainer for this driver. > > > > > > The datasheet can be found at the manufacturers website, see [1]. All > > > device-tree exposed configuration features have been tested on a i.MX6 > > > platform with a USB2512B hub. > > > > > > [1] http://ww1.microchip.com/downloads/en/DeviceDoc/00001692C.pdf > > > > > > Signed-off-by: Richard Leitner <richard.leitner@xxxxxxxxxxx> > > > --- > > > CHANGES v5: > > > > V5 and the first I see it? > > Just double-checked it, you (robh+dt@xxxxxxxxxx) were on CC since v1. > > @greg-kh: I got the notification that v5 was already applied to your usb > tree. So how should I proceed here? Send a v6 or send a separate patch > fixing the dt issues mentioned by robh? A separate patch fixing the issues is fine, I don't think it's worth reverting your original patch and then adding an updated one to the tree. thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
