(Adding Maxime)
Den 06.02.2017 13.34, skrev Andrzej Hajda:
On 06.02.2017 12:53, Thierry Reding wrote:
On Mon, Feb 06, 2017 at 01:30:09PM +0200, Jani Nikula wrote:
On Mon, 06 Feb 2017, Thierry Reding <thierry.reding@xxxxxxxxx> wrote:
On Tue, Jan 31, 2017 at 05:03:15PM +0100, Noralf Trønnes wrote:
Add support for MIPI DBI compatible controllers.
Interface type C option 1 and 3 are supported (SPI).
Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
---
Documentation/gpu/tinydrm.rst | 12 +
drivers/gpu/drm/tinydrm/Kconfig | 3 +
drivers/gpu/drm/tinydrm/Makefile | 3 +
drivers/gpu/drm/tinydrm/mipi-dbi.c | 1005 ++++++++++++++++++++++++++++++++++++
include/drm/tinydrm/mipi-dbi.h | 107 ++++
5 files changed, 1130 insertions(+)
create mode 100644 drivers/gpu/drm/tinydrm/mipi-dbi.c
create mode 100644 include/drm/tinydrm/mipi-dbi.h
Any reason why this is in the tinydrm subdirectory? Looks like this
could be useful to drivers outside of it.
I did consider having it outside, but I couldn't find any users in drm
that could benefit from it (there is one backlight driver).
But now there's Maxime's panel driver.
How about something like this:
(I have not included the framebuffer dirty function since it will only
be used in tinydrm anyway)
include/drm/drm_mipi_dbi.h:
struct mipi_dbi_device;
/**
* mipi_dbi_dcs_write - MIPI DCS command with optional parameter(s)
* @dbi: MIPI DBI structure
* @cmd: Command
* @seq...: Optional parameter(s)
*
* Send MIPI DCS command to the controller. Use
mipi_dbi_dcs_read_buffer() for
* get/read commands.
*
* Returns:
* Zero on success, negative error code on failure.
*/
#define mipi_dbi_dcs_write(dbi, cmd, seq...) \
({ \
const u8 d[] = { seq }; \
BUILD_BUG_ON_MSG(ARRAY_SIZE(d) > 64, "DCS sequence too big for
stack");\
mipi_dbi_dcs_write_buffer(dbi, cmd, d, ARRAY_SIZE(d)); \
})
...
drivers/gpu/drm/drm_mipi_dbi.c:
struct mipi_dbi_device {
struct mutex lock;
int (*write)(struct mipi_dbi_device *dbi, u8 cmd, const u8 *par,
size_t num);
int (*read)(struct mipi_dbi_device *dbi, u8 cmd, u8 *par, size_t num);
bool swap16;
};
/* MIPI DBI Type C options 1 and 3 */
struct mipi_dbi_spi_device {
struct mipi_dbi_device dbi;
struct spi_device *spi;
struct gpio_desc *dc;
};
/*
* MIPI DBI Type B - Intel 8080 type parallel bus
* I need this to fully convert staging/fbtft to drm
*/
struct mipi_dbi_i80_device {
struct mipi_dbi_device dbi;
struct device *dev;
struct gpio_desc *cs;
struct gpio_desc *dc;
struct gpio_desc *wr;
struct gpio_descs *db;
};
/**
* mipi_dbi_get_swap16 - Is byteswapping 16-bit pixel data needed?
* @dbi: MIPI DBI device
*
* Byte swapping 16-bit pixel data is necessary if the bus can't
support 16-bit
* big endian transfers (e.g. if SPI can only do 8-bit and the machine is
* little endian). This applies to the MIPI_DCS_WRITE_MEMORY_START command.
*
* Returns:
* True if it's neccesary to swap bytes, false otherwise.
*/
bool mipi_dbi_get_swap16(struct mipi_dbi_device *dbi)
{
return dbi->swap16;
}
/**
* mipi_dbi_spi_init - Initialize MIPI DBI SPI device
* @spi: SPI device
* @dc: D/C gpio (optional)
* @writeonly: True if it's not possible to read from the controller.
*
* If @dc is set, a Type C Option 3 interface is assumed, if not
* Type C Option 1 (9-bit).
*
* If the SPI master driver doesn't support the necessary bits per word,
* the following transformation is used:
*
* - 9-bit: reorder buffer as 9x 8-bit words, padded with no-op command.
* - 16-bit (pixel data): if machine is big endian send as 8-bit, if little
* endian the user is responsible for swapping the bytes.
* See mipi_dbi_get_swap_pixel_bytes().
*
* Returns:
* Pointer to &mipi_dbi_device on success, ERR_PTR on failure.
*/
struct mipi_dbi_device *mipi_dbi_spi_init(struct spi_device *spi,
struct gpio_desc *dc, bool writeonly)
{
...
}
struct mipi_dbi_device *mipi_dbi_i80_init(...)
Noralf.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
