On 06.02.2017 12:53, Thierry Reding wrote: > On Mon, Feb 06, 2017 at 01:30:09PM +0200, Jani Nikula wrote: >> On Mon, 06 Feb 2017, Thierry Reding <thierry.reding@xxxxxxxxx> wrote: >>> On Tue, Jan 31, 2017 at 05:03:15PM +0100, Noralf Trønnes wrote: >>>> Add support for MIPI DBI compatible controllers. >>>> Interface type C option 1 and 3 are supported (SPI). >>>> >>>> Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx> >>>> --- >>>> Documentation/gpu/tinydrm.rst | 12 + >>>> drivers/gpu/drm/tinydrm/Kconfig | 3 + >>>> drivers/gpu/drm/tinydrm/Makefile | 3 + >>>> drivers/gpu/drm/tinydrm/mipi-dbi.c | 1005 ++++++++++++++++++++++++++++++++++++ >>>> include/drm/tinydrm/mipi-dbi.h | 107 ++++ >>>> 5 files changed, 1130 insertions(+) >>>> create mode 100644 drivers/gpu/drm/tinydrm/mipi-dbi.c >>>> create mode 100644 include/drm/tinydrm/mipi-dbi.h >>> Any reason why this is in the tinydrm subdirectory? Looks like this >>> could be useful to drivers outside of it. >>> >>>> diff --git a/drivers/gpu/drm/tinydrm/mipi-dbi.c b/drivers/gpu/drm/tinydrm/mipi-dbi.c >>>> new file mode 100644 >>>> index 0000000..5ded299 >>>> --- /dev/null >>>> +++ b/drivers/gpu/drm/tinydrm/mipi-dbi.c >>>> @@ -0,0 +1,1005 @@ >>>> +/* >>>> + * MIPI Display Bus Interface (DBI) LCD controller support >>>> + * >>>> + * Copyright 2016 Noralf Trønnes >>>> + * >>>> + * This program is free software; you can redistribute it and/or modify >>>> + * it under the terms of the GNU General Public License as published by >>>> + * the Free Software Foundation; either version 2 of the License, or >>>> + * (at your option) any later version. >>>> + */ >>>> + >>>> +#include <drm/tinydrm/mipi-dbi.h> >>>> +#include <drm/tinydrm/tinydrm-helpers.h> >>>> +#include <linux/debugfs.h> >>>> +#include <linux/dma-buf.h> >>>> +#include <linux/gpio/consumer.h> >>>> +#include <linux/module.h> >>>> +#include <linux/regulator/consumer.h> >>>> +#include <linux/spi/spi.h> >>>> +#include <video/mipi_display.h> >>>> + >>>> +#define MIPI_DBI_MAX_SPI_READ_SPEED 2000000 /* 2MHz */ >>>> + >>>> +#define DCS_POWER_MODE_DISPLAY BIT(2) >>>> +#define DCS_POWER_MODE_DISPLAY_NORMAL_MODE BIT(3) >>>> +#define DCS_POWER_MODE_SLEEP_MODE BIT(4) >>>> +#define DCS_POWER_MODE_PARTIAL_MODE BIT(5) >>>> +#define DCS_POWER_MODE_IDLE_MODE BIT(6) >>>> +#define DCS_POWER_MODE_RESERVED_MASK (BIT(0) | BIT(1) | BIT(7)) >>> Should these perhaps be defined in include/video/mipi_display.h since >>> that already defines the MIPI_DCS_GET_POWER_MODE that this is used with? >> Agreed. >> >>>> +/** >>>> + * mipi_dbi_command - MIPI DCS command with optional parameter(s) >>>> + * @mipi: MIPI structure >>>> + * @cmd: Command >>>> + * @seq...: Optional parameter(s) >>>> + * >>>> + * Send MIPI DCS command to the controller. Use mipi_dbi_command_read() for >>>> + * get/read. >>>> + * >>>> + * Returns: >>>> + * Zero on success, negative error code on failure. >>>> + */ >>>> +#define mipi_dbi_command(mipi, cmd, seq...) \ >>>> +({ \ >>>> + u8 d[] = { seq }; \ >>>> + mipi_dbi_command_buf(mipi, cmd, d, ARRAY_SIZE(d)); \ >>>> +}) >>> I feel obligated to object to this because I objected to the same macro >>> when Andrzej wanted to add the same macro for MIPI DSI. But since I'm >>> apparently the only one that doesn't like this, maybe it's time for me >>> to embrace this. >> I think that's less interesting for MIPI DSI now that we have specific >> functions for most standard DCS commands anyway. That also avoids the >> need to have a list of read functions like here. >> >> I guess the question is if it feels like too much duplication to have >> the DCS commands as functions also for DBI. And whether it's worth >> trying to deduplicate DSI and DBI in this case, or if it gets just too >> confusing/complicated. > The problem with this is that we can't possible have all accesses > covered by specific functions. Most of the calls using this function or > macro are for panel-specific commands that often take an arbitrary > number of arguments. > > I personally think that Maxime's implementation for ST7789V is somewhat > nicer, though it would require some more work for DSI and DBI to have it > all stashed into a single buffer for the transfer. > > Anyway, my main concern with these is that we need to allow for proper > error handling, and the above correctly propagates error codes, so the > matter that it's a macro with a variable argument list and might store > potentially huge arrays on the stack could be addressed when they > become really problematic, rather than just annoying me because they > aren't pretty. You can always add compile time check for sequence length to the macro [1]. Other thing is that sequence is often constant, in such case, to save few bits of space, it can be stored in 'static const' array, but for this array passed to mipi_dbi_command_buf should be constant. And of course it requires another macro. [1]: http://lxr.free-electrons.com/source/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c?v=4.4#L169 Regards Andrzej > > Thierry > > > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/dri-devel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html