Re: [PATCH v3 3/7] drm/tinydrm: Add MIPI DBI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Jan 31, 2017 at 05:03:15PM +0100, Noralf Trønnes wrote:
> Add support for MIPI DBI compatible controllers.
> Interface type C option 1 and 3 are supported (SPI).
> 
> Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
> ---
>  Documentation/gpu/tinydrm.rst      |   12 +
>  drivers/gpu/drm/tinydrm/Kconfig    |    3 +
>  drivers/gpu/drm/tinydrm/Makefile   |    3 +
>  drivers/gpu/drm/tinydrm/mipi-dbi.c | 1005 ++++++++++++++++++++++++++++++++++++
>  include/drm/tinydrm/mipi-dbi.h     |  107 ++++
>  5 files changed, 1130 insertions(+)
>  create mode 100644 drivers/gpu/drm/tinydrm/mipi-dbi.c
>  create mode 100644 include/drm/tinydrm/mipi-dbi.h

Any reason why this is in the tinydrm subdirectory? Looks like this
could be useful to drivers outside of it.

> diff --git a/drivers/gpu/drm/tinydrm/mipi-dbi.c b/drivers/gpu/drm/tinydrm/mipi-dbi.c
> new file mode 100644
> index 0000000..5ded299
> --- /dev/null
> +++ b/drivers/gpu/drm/tinydrm/mipi-dbi.c
> @@ -0,0 +1,1005 @@
> +/*
> + * MIPI Display Bus Interface (DBI) LCD controller support
> + *
> + * Copyright 2016 Noralf Trønnes
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <drm/tinydrm/mipi-dbi.h>
> +#include <drm/tinydrm/tinydrm-helpers.h>
> +#include <linux/debugfs.h>
> +#include <linux/dma-buf.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +#include <video/mipi_display.h>
> +
> +#define MIPI_DBI_MAX_SPI_READ_SPEED 2000000 /* 2MHz */
> +
> +#define DCS_POWER_MODE_DISPLAY			BIT(2)
> +#define DCS_POWER_MODE_DISPLAY_NORMAL_MODE	BIT(3)
> +#define DCS_POWER_MODE_SLEEP_MODE		BIT(4)
> +#define DCS_POWER_MODE_PARTIAL_MODE		BIT(5)
> +#define DCS_POWER_MODE_IDLE_MODE		BIT(6)
> +#define DCS_POWER_MODE_RESERVED_MASK		(BIT(0) | BIT(1) | BIT(7))

Should these perhaps be defined in include/video/mipi_display.h since
that already defines the MIPI_DCS_GET_POWER_MODE that this is used with?

> +/**
> + * mipi_dbi_command - MIPI DCS command with optional parameter(s)
> + * @mipi: MIPI structure
> + * @cmd: Command
> + * @seq...: Optional parameter(s)
> + *
> + * Send MIPI DCS command to the controller. Use mipi_dbi_command_read() for
> + * get/read.
> + *
> + * Returns:
> + * Zero on success, negative error code on failure.
> + */
> +#define mipi_dbi_command(mipi, cmd, seq...) \
> +({ \
> +	u8 d[] = { seq }; \
> +	mipi_dbi_command_buf(mipi, cmd, d, ARRAY_SIZE(d)); \
> +})

I feel obligated to object to this because I objected to the same macro
when Andrzej wanted to add the same macro for MIPI DSI. But since I'm
apparently the only one that doesn't like this, maybe it's time for me
to embrace this.

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux