The 98DX3236, 98DX3336 and 98DX4251 are a set of switch ASICs with
integrated CPUs. They CPU block is common within these product lines and
(as far as I can tell/have been told) is based on the Armada XP. There
are a few differences due to the fact they have to squeeze the CPU into
the same package as the switch.
I've rebased this series against linux-pinctrl/devel to get access to
mvebu_mmio_mpp_ctrl. Everything else still applies cleanly to v4.10.0-rc5.
Chris Packham (4):
clk: mvebu: support for 98DX3236 SoC
Changes in v2:
- Update devicetree binding documentation for new compatible string
Changes in v3:
- Add 98dx3236 support to mvebu/clk-corediv.c rather than creating a new
driver.
- Document mv98dx3236-corediv-clock binding
Changes in v4:
- None
Changes in v5:
- Collect ack from Rob
- Remove explicit initialisation of fields to 0 in mv98dx3236_coreclks
- Register dummy clock provider for marvell,mv98dx3236-cpu-clock
arm: mvebu: support for SMP on 98DX3336 SoC
Changes in v2:
- Document new enable-method value
- Correct some references from 98DX4521 to 98DX3236
Changes in v3:
- Simplify mv98dx3236_resume_init by using of_io_request_and_map()
Changes in v4:
- integrate changes into platsmp.c instead of new init call
- avoid duplicated code.
- fix error return
- Collect ack from Rob
Changes in v5:
- Remove useless casts (thanks to Stephen Boyd)
arm: mvebu: Add device tree for 98DX3236 SoCs
Changes in v2:
- Update devicetree binding documentation to reflect that 98DX3336 and
984251 are supersets of 98DX3236.
- disable crypto block
- disable sdio for 98DX3236, enable for 98DX4251
Changes in v3:
- fix typo 4521 -> 4251
- document prestera bindings
- rework corediv-clock binding
- add label to packet processor node
- add new compatible string for DFX server
Changes in v4:
- Collect ack from Rob
Changes in v5:
- Fixup license text. Add labels to nodes.
arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
Changes in v5:
- update license text
- use node labels
Kalyan Kinthada (1):
pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
Changes in v2:
- include sdio support for the 98DX4251
Changes in v3:
- None
Changes in v4:
- Correct some discrepencies between binding and driver.
- Collect acks from Rob and Sebastian
Changes in v5:
- Update bindings to reflect "gpo" pins
- Use mvebu_mmio_mpp_ctrl instead of armada_xp_mpp_ctrl (note this is reliant
on changes queued in linux-pinctrl)
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
.../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 16 ++
.../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
.../bindings/clock/mvebu-corediv-clock.txt | 1 +
.../devicetree/bindings/clock/mvebu-cpu-clock.txt | 1 +
.../devicetree/bindings/net/marvell,prestera.txt | 50 ++++
.../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 ++++
arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 254 +++++++++++++++++++++
arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 76 ++++++
arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 90 ++++++++
arch/arm/boot/dts/db-dxbc2.dts | 151 ++++++++++++
arch/arm/boot/dts/db-xc3-24g4xg.dts | 142 ++++++++++++
arch/arm/mach-mvebu/platsmp.c | 86 +++++++
drivers/clk/mvebu/armada-xp.c | 39 ++++
drivers/clk/mvebu/clk-corediv.c | 23 ++
drivers/clk/mvebu/clk-cpu.c | 8 +
drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 156 +++++++++++++
17 files changed, 1163 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
create mode 100644 arch/arm/boot/dts/db-dxbc2.dts
create mode 100644 arch/arm/boot/dts/db-xc3-24g4xg.dts
interdiff to v4:
diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
index 520562a7dc2a..c7b4e3a6b2c6 100644
@@ -85,7 +86,7 @@
by address and length of the PMU DFS registers
- #clock-cells : should be set to 1.
diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
-index b3094315a3c0..0413bf8284e0 100644
+index b3094315a3c0..890a863ae0d0 100644
--- a/drivers/clk/mvebu/armada-xp.c
+++ b/drivers/clk/mvebu/armada-xp.c
return 250000000;
@@ -118,9 +119,6 @@
+static const struct coreclk_soc_desc mv98dx3236_coreclks = {
+ .get_tclk_freq = mv98dx3236_get_tclk_freq,
+ .get_cpu_freq = mv98dx3236_get_cpu_freq,
-+ .get_clk_ratio = NULL,
-+ .ratios = NULL,
-+ .num_ratios = 0,
+};
+
/*
@@ -200,53 +198,16 @@
+CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
+ mv98dx3236_corediv_clk_init);
diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
-index 5837eb8a212f..3b8f0e14fa01 100644
+index 5837eb8a212f..044892b6534d 100644
--- a/drivers/clk/mvebu/clk-cpu.c
+++ b/drivers/clk/mvebu/clk-cpu.c
- .set_rate = clk_cpu_set_rate,
- };
-
--static void __init of_cpu_clk_setup(struct device_node *node)
-+/* Add parameter to allow this to support different clock operations. */
-+static void __init _of_cpu_clk_setup(struct device_node *node,
-+ const struct clk_ops *cpu_clk_ops)
- {
- struct cpu_clk *cpuclk;
- void __iomem *clock_complex_base = of_iomap(node, 0);
- cpuclk[cpu].hw.init = &init;
- init.name = cpuclk[cpu].clk_name;
-- init.ops = &cpu_ops;
-+ init.ops = cpu_clk_ops;
- init.flags = 0;
- init.parent_names = &cpuclk[cpu].parent_name;
- init.num_parents = 1;
- iounmap(clock_complex_base);
- }
-
-+/* Use this function to call the generic setup with the correct
-+ * clock operation
-+ */
-+static void __init of_cpu_clk_setup(struct device_node *node)
-+{
-+ _of_cpu_clk_setup(node, &cpu_ops);
-+}
-+
CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
of_cpu_clk_setup);
+
-+/* Define the clock and operations for the mv98dx3236 - it cannot perform
-+ * any operations.
-+ */
-+static const struct clk_ops mv98dx3236_cpu_ops = {
-+ .recalc_rate = NULL,
-+ .round_rate = NULL,
-+ .set_rate = NULL,
-+};
-+
+static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
+{
-+ _of_cpu_clk_setup(node, &mv98dx3236_cpu_ops);
++ of_clk_add_provider(node, of_clk_src_simple_get, NULL);
+}
+
+CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
@@ -285,7 +247,7 @@
"qcom,gcc-msm8660"
diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
new file mode 100644
-index 000000000000..8082ba872edd
+index 000000000000..26eb9d3aa630
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
+Resume Control
@@ -304,10 +266,8 @@
+ compatible = "marvell,98dx3336-resume-ctrl";
+ reg = <0x20980 0x10>;
+};
-+
-+
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
-index 46c742d3bd41..59be3ca0464f 100644
+index 46c742d3bd41..a5b464497e1a 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -327,7 +287,7 @@
+static const struct of_device_id of_mv98dx3236_resume_table[] = {
+ {
+ .compatible = "marvell,98dx3336-resume-ctrl",
-+ .data = (void *)&mv98dx3336_resume_controller,
++ .data = &mv98dx3336_resume_controller,
+ },
+ { /* end of list */ },
+};
@@ -337,7 +297,7 @@
+ const struct of_device_id *match;
+ struct device_node *np;
+ void __iomem *base;
-+ struct resume_controller *rc;
++ const struct resume_controller *rc;
+
+ WARN_ON(hw_cpu != 1);
+
@@ -347,7 +307,7 @@
+ return -ENODEV;
+
+ base = of_io_request_and_map(np, 0, of_node_full_name(np));
-+ rc = (struct resume_controller *)match->data;
++ rc = match->data;
+ of_node_put(np);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
@@ -411,15 +371,17 @@
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
new file mode 100644
-index 000000000000..d4e6ecdfc853
+index 000000000000..97aef67ee769
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
+* Marvell 98dx3236 pinctrl driver for mpp
@@ -435,41 +397,41 @@
+
+name pins functions
+================================================================================
-+mpp0 0 gpio, spi0(mosi), dev(ad8)
++mpp0 0 gpo, spi0(mosi), dev(ad8)
+mpp1 1 gpio, spi0(miso), dev(ad9)
-+mpp2 2 gpio, spi0(sck), dev(ad10)
++mpp2 2 gpo, spi0(sck), dev(ad10)
+mpp3 3 gpio, spi0(cs0), dev(ad11)
+mpp4 4 gpio, spi0(cs1), smi(mdc), dev(cs0)
+mpp5 5 gpio, pex(rsto), sd0(cmd), dev(bootcs)
-+mpp6 6 gpio, sd0(clk), dev(a2)
++mpp6 6 gpo, sd0(clk), dev(a2)
+mpp7 7 gpio, sd0(d0), dev(ale0)
+mpp8 8 gpio, sd0(d1), dev(ale1)
+mpp9 9 gpio, sd0(d2), dev(ready0)
+mpp10 10 gpio, sd0(d3), dev(ad12)
+mpp11 11 gpio, uart1(rxd), uart0(cts), dev(ad13)
-+mpp12 12 gpio, uart1(txd), uart0(rts), dev(ad14)
++mpp12 12 gpo, uart1(txd), uart0(rts), dev(ad14)
+mpp13 13 gpio, intr(out), dev(ad15)
+mpp14 14 gpio, i2c0(sck)
+mpp15 15 gpio, i2c0(sda)
-+mpp16 16 gpio, dev(oe)
-+mpp17 17 gpio, dev(clk)
++mpp16 16 gpo, dev(oe)
++mpp17 17 gpo, dev(clkout)
+mpp18 18 gpio, uart1(txd)
+mpp19 19 gpio, uart1(rxd), dev(rb)
-+mpp20 20 gpio, dev(we)
-+mpp21 21 gpio, dev(ad0)
-+mpp22 22 gpio, dev(ad1)
-+mpp23 23 gpio, dev(ad2)
-+mpp24 24 gpio, dev(ad3)
-+mpp25 25 gpio, dev(ad4)
-+mpp26 26 gpio, dev(ad5)
-+mpp27 27 gpio, dev(ad6)
-+mpp28 28 gpio, dev(ad7)
-+mpp29 29 gpio, dev(a0)
-+mpp30 30 gpio, dev(a1)
++mpp20 20 gpo, dev(we0)
++mpp21 21 gpo, dev(ad0)
++mpp22 22 gpo, dev(ad1)
++mpp23 23 gpo, dev(ad2)
++mpp24 24 gpo, dev(ad3)
++mpp25 25 gpo, dev(ad4)
++mpp26 26 gpo, dev(ad5)
++mpp27 27 gpo, dev(ad6)
++mpp28 28 gpo, dev(ad7)
++mpp29 29 gpo, dev(a0)
++mpp30 30 gpo, dev(a1)
+mpp31 31 gpio, slv_smi(mdc), smi(mdc), dev(we1)
+mpp32 32 gpio, slv_smi(mdio), smi(mdio), dev(cs1)
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
-index e4ea71a9d985..554eeae8cd21 100644
+index 63e1bd506983..61cbc138703e 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
V_MV78460 = BIT(2),
@@ -495,8 +457,8 @@
+ MPP_VAR_FUNCTION(0x2, "spi0", "miso", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad9", V_98DX3236_PLUS)),
+ MPP_MODE(2,
-+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
-+ MPP_VAR_FUNCTION(0x2, "spi0", "csk", V_98DX3236_PLUS),
++ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
++ MPP_VAR_FUNCTION(0x2, "spi0", "sck", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad10", V_98DX3236_PLUS)),
+ MPP_MODE(3,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
@@ -511,7 +473,7 @@
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "pex", "rsto", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "sd0", "cmd", V_98DX4251),
-+ MPP_VAR_FUNCTION(0x4, "dev", "bootcs0", V_98DX3236_PLUS)),
++ MPP_VAR_FUNCTION(0x4, "dev", "bootcs", V_98DX3236_PLUS)),
+ MPP_MODE(6,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "sd0", "clk", V_98DX4251),
@@ -563,7 +525,8 @@
+ MPP_VAR_FUNCTION(0x3, "uart1", "txd", V_98DX3236_PLUS)),
+ MPP_MODE(19,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
-+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS)),
++ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS),
++ MPP_VAR_FUNCTION(0x4, "dev", "rb", V_98DX3236_PLUS)),
+ MPP_MODE(20,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "we0", V_98DX3236_PLUS)),
@@ -630,11 +593,11 @@
};
+static struct mvebu_mpp_ctrl mv98dx3236_mpp_controls[] = {
-+ MPP_FUNC_CTRL(0, 32, NULL, armada_xp_mpp_ctrl),
++ MPP_FUNC_CTRL(0, 32, NULL, mvebu_mmio_mpp_ctrl),
+};
+
+static struct pinctrl_gpio_range mv98dx3236_mpp_gpio_ranges[] = {
-+ MPP_GPIO_RANGE(0, 0, 0, 32),
++ MPP_GPIO_RANGE(0, 0, 0, 32),
+};
+
static int armada_xp_pinctrl_suspend(struct platform_device *pdev,
@@ -767,7 +731,7 @@
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
new file mode 100644
-index 000000000000..4b7b2fe3b682
+index 000000000000..9461128fae24
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+/*
@@ -785,17 +749,17 @@
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
-+ * This file is distributed in the hope that it will be useful
++ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
-+ * Or, alternatively
++ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use
++ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
@@ -804,11 +768,11 @@
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
-+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
@@ -851,9 +815,9 @@
+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+
+ /*
-+ * 98DX3236 has 1 x1 PCIe unit Gen2.0: One unit can be
++ * 98DX3236 has 1 x1 PCIe unit Gen2.0
+ */
-+ pcie-controller {
++ pciec: pcie-controller@82000000 {
+ compatible = "marvell,armada-xp-pcie";
+ status = "disabled";
+ device_type = "pci";
@@ -870,7 +834,7 @@
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
+
-+ pcie@1,0 {
++ pcie1: pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
@@ -967,7 +931,7 @@
+ };
+ };
+
-+ dfx-registers {
++ dfxr: dfx-registers@ac000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
@@ -987,7 +951,7 @@
+ };
+ };
+
-+ switch {
++ switch: switch@a8000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
@@ -1026,7 +990,7 @@
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
new file mode 100644
-index 000000000000..a9b0f47f8df9
+index 000000000000..e1580afdc260
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
+/*
@@ -1044,17 +1008,17 @@
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
-+ * This file is distributed in the hope that it will be useful
++ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
-+ * Or, alternatively
++ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use
++ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
@@ -1063,16 +1027,16 @@
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
-+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
-+ * Contains definitions specific to the 98dx3336 SoC that are not
++ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
@@ -1107,7 +1071,7 @@
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
new file mode 100644
-index 000000000000..446e6e65ec59
+index 000000000000..4b0533a4ccb7
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
+/*
@@ -1125,17 +1089,17 @@
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
-+ * This file is distributed in the hope that it will be useful
++ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
-+ * Or, alternatively
++ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use
++ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
@@ -1144,11 +1108,11 @@
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
-+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
@@ -1213,15 +1177,15 @@
diff --git a/arch/arm/boot/dts/db-dxbc2.dts b/arch/arm/boot/dts/db-dxbc2.dts
new file mode 100644
-index 000000000000..f56786cea5f8
+index 000000000000..a8130805074e
--- /dev/null
+++ b/arch/arm/boot/dts/db-dxbc2.dts
+/*
@@ -1241,17 +1205,17 @@
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
-+ * This file is distributed in the hope that it will be useful
++ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
-+ * Or, alternatively
++ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use
++ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
@@ -1260,11 +1224,11 @@
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
-+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
@@ -1295,66 +1259,58 @@
+ reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+ };
+
-+ soc {
-+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
-+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
++};
+
-+ devbus-bootcs {
-+ status = "okay";
++&devbus_bootcs {
++ status = "okay";
+
-+ /* Device Bus parameters are required */
++ /* Device Bus parameters are required */
+
-+ /* Read parameters */
-+ devbus,bus-width = <16>;
-+ devbus,turn-off-ps = <60000>;
-+ devbus,badr-skew-ps = <0>;
-+ devbus,acc-first-ps = <124000>;
-+ devbus,acc-next-ps = <248000>;
-+ devbus,rd-setup-ps = <0>;
-+ devbus,rd-hold-ps = <0>;
-+
-+ /* Write parameters */
-+ devbus,sync-enable = <0>;
-+ devbus,wr-high-ps = <60000>;
-+ devbus,wr-low-ps = <60000>;
-+ devbus,ale-wr-ps = <60000>;
-+ };
++ /* Read parameters */
++ devbus,bus-width = <16>;
++ devbus,turn-off-ps = <60000>;
++ devbus,badr-skew-ps = <0>;
++ devbus,acc-first-ps = <124000>;
++ devbus,acc-next-ps = <248000>;
++ devbus,rd-setup-ps = <0>;
++ devbus,rd-hold-ps = <0>;
++
++ /* Write parameters */
++ devbus,sync-enable = <0>;
++ devbus,wr-high-ps = <60000>;
++ devbus,wr-low-ps = <60000>;
++ devbus,ale-wr-ps = <60000>;
++};
+
-+ internal-regs {
-+ serial@12000 {
-+ status = "okay";
-+ };
-+ serial@12100 {
-+ status = "okay";
-+ };
++&i2c0 {
++ clock-frequency = <100000>;
++ status = "okay";
++};
+
-+ i2c@11000 {
-+ clock-frequency = <100000>;
-+ status = "okay";
-+ };
++&uart0 {
++ status = "okay";
++};
+
-+ mvsdio@d4000 {
-+ pinctrl-0 = <&sdio_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ /* No CD or WP GPIOs */
-+ broken-cd;
-+ };
++&uart1 {
++ status = "okay";
++};
+
-+ nand@d0000 {
-+ status = "okay";
-+ num-cs = <1>;
-+ marvell,nand-keep-config;
-+ marvell,nand-enable-arbiter;
-+ nand-on-flash-bbt;
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+ };
-+ };
-+ };
++&nand {
++ status = "okay";
++ num-cs = <1>;
++ marvell,nand-keep-config;
++ marvell,nand-enable-arbiter;
++ nand-on-flash-bbt;
++ nand-ecc-strength = <4>;
++ nand-ecc-step-size = <512>;
++};
++
++&sdio {
++ pinctrl-0 = <&sdio_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++ /* No CD or WP GPIOs */
++ broken-cd;
+};
+
+&spi0 {
@@ -1385,7 +1341,7 @@
+};
diff --git a/arch/arm/boot/dts/db-xc3-24g4xg.dts b/arch/arm/boot/dts/db-xc3-24g4xg.dts
new file mode 100644
-index 000000000000..5eb89ffb9a7d
+index 000000000000..4e07cb6ed800
--- /dev/null
+++ b/arch/arm/boot/dts/db-xc3-24g4xg.dts
+/*
@@ -1405,17 +1361,17 @@
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
-+ * This file is distributed in the hope that it will be useful
++ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
-+ * Or, alternatively
++ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use
++ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
@@ -1424,11 +1380,11 @@
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
-+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
@@ -1458,63 +1414,50 @@
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+ };
++};
+
-+ soc {
-+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
-+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
-+
-+ devbus-bootcs {
-+ status = "okay";
++&devbus_bootcs {
++ status = "okay";
+
-+ /* Device Bus parameters are required */
++ /* Device Bus parameters are required */
+
-+ /* Read parameters */
-+ devbus,bus-width = <16>;
-+ devbus,turn-off-ps = <60000>;
-+ devbus,badr-skew-ps = <0>;
-+ devbus,acc-first-ps = <124000>;
-+ devbus,acc-next-ps = <248000>;
-+ devbus,rd-setup-ps = <0>;
-+ devbus,rd-hold-ps = <0>;
-+
-+ /* Write parameters */
-+ devbus,sync-enable = <0>;
-+ devbus,wr-high-ps = <60000>;
-+ devbus,wr-low-ps = <60000>;
-+ devbus,ale-wr-ps = <60000>;
-+ };
++ /* Read parameters */
++ devbus,bus-width = <16>;
++ devbus,turn-off-ps = <60000>;
++ devbus,badr-skew-ps = <0>;
++ devbus,acc-first-ps = <124000>;
++ devbus,acc-next-ps = <248000>;
++ devbus,rd-setup-ps = <0>;
++ devbus,rd-hold-ps = <0>;
++
++ /* Write parameters */
++ devbus,sync-enable = <0>;
++ devbus,wr-high-ps = <60000>;
++ devbus,wr-low-ps = <60000>;
++ devbus,ale-wr-ps = <60000>;
++};
+
-+ internal-regs {
-+ serial@12000 {
-+ status = "okay";
-+ };
-+ serial@12100 {
-+ status = "okay";
-+ };
++&uart0 {
++ status = "okay";
++};
+
-+ i2c@11000 {
-+ clock-frequency = <100000>;
-+ status = "okay";
-+ };
++&uart1 {
++ status = "okay";
++};
+
-+ mvsdio@d4000 {
-+ status = "disabled";
-+ };
++&i2c0 {
++ clock-frequency = <100000>;
++ status = "okay";
++};
+
-+ nand@d0000 {
-+ status = "okay";
-+ num-cs = <1>;
-+ marvell,nand-keep-config;
-+ marvell,nand-enable-arbiter;
-+ nand-on-flash-bbt;
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+ };
-+ };
-+ };
++&nand {
++ status = "okay";
++ num-cs = <1>;
++ marvell,nand-keep-config;
++ marvell,nand-enable-arbiter;
++ nand-on-flash-bbt;
++ nand-ecc-strength = <4>;
++ nand-ecc-step-size = <512>;
+};
+
+&spi0 {
--
2.11.0.24.ge6920cf
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
