Re: [PATCHv5 0/5] Support for Marvell switches with integrated CPUs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi all,
 
 On ven., janv. 27 2017, Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> wrote:

> The 98DX3236, 98DX3336 and 98DX4251 are a set of switch ASICs with
> integrated CPUs. They CPU block is common within these product lines and
> (as far as I can tell/have been told) is based on the Armada XP. There
> are a few differences due to the fact they have to squeeze the CPU into
> the same package as the switch.
>
> I've rebased this series against linux-pinctrl/devel to get access to
> mvebu_mmio_mpp_ctrl. Everything else still applies cleanly to
> v4.10.0-rc5.

Just to let you know that I plan to apply the 3 arm patch once Chris
will have sent the new series with the minor fixes I asked on patch 3.

I already applied them in the for-next branch to benefit of some build
test coverage.

Stephen,

you gave your Acked-by on the first patch, but don't you plan to apply
it on the clk branch?

If you really want I can apply on mvebu but there is no build
dependencies, so the order the patches will be merged is not important.

Linus,

I expect you will apply the pinctrl patch on your tree as it depend of
code already there.

Thanks,

Gregory

>
> Chris Packham (4):
>   clk: mvebu: support for 98DX3236 SoC
>     Changes in v2:
>     - Update devicetree binding documentation for new compatible string
>     Changes in v3:
>     - Add 98dx3236 support to mvebu/clk-corediv.c rather than creating a new
>       driver.
>     - Document mv98dx3236-corediv-clock binding
>     Changes in v4:
>     - None
>     Changes in v5:
>     - Collect ack from Rob
>     - Remove explicit initialisation of fields to 0 in mv98dx3236_coreclks
>     - Register dummy clock provider for marvell,mv98dx3236-cpu-clock
>   arm: mvebu: support for SMP on 98DX3336 SoC
>     Changes in v2:
>     - Document new enable-method value
>     - Correct some references from 98DX4521 to 98DX3236
>     Changes in v3:
>     - Simplify mv98dx3236_resume_init by using of_io_request_and_map()
>     Changes in v4:
>     - integrate changes into platsmp.c instead of new init call
>     - avoid duplicated code.
>     - fix error return
>     - Collect ack from Rob
>     Changes in v5:
>     - Remove useless casts (thanks to Stephen Boyd)
>   arm: mvebu: Add device tree for 98DX3236 SoCs
>     Changes in v2:
>     - Update devicetree binding documentation to reflect that 98DX3336 and
>       984251 are supersets of 98DX3236.
>     - disable crypto block
>     - disable sdio for 98DX3236, enable for 98DX4251
>     Changes in v3:
>     - fix typo 4521 -> 4251
>     - document prestera bindings
>     - rework corediv-clock binding
>     - add label to packet processor node
>     - add new compatible string for DFX server
>     Changes in v4:
>     - Collect ack from Rob
>     Changes in v5:
>     - Fixup license text. Add labels to nodes.
>   arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
>     Changes in v5:
>     - update license text
>     - use node labels
>
> Kalyan Kinthada (1):
>   pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
>     Changes in v2:
>     - include sdio support for the 98DX4251
>     Changes in v3:
>     - None
>     Changes in v4:
>     - Correct some discrepencies between binding and driver.
>     - Collect acks from Rob and Sebastian
>     Changes in v5:
>     - Update bindings to reflect "gpo" pins
>     - Use mvebu_mmio_mpp_ctrl instead of armada_xp_mpp_ctrl (note this is reliant
>       on changes queued in linux-pinctrl)
>
>  Documentation/devicetree/bindings/arm/cpus.txt     |   1 +
>  .../bindings/arm/marvell/98dx3236-resume-ctrl.txt  |  16 ++
>  .../devicetree/bindings/arm/marvell/98dx3236.txt   |  23 ++
>  .../bindings/clock/mvebu-corediv-clock.txt         |   1 +
>  .../devicetree/bindings/clock/mvebu-cpu-clock.txt  |   1 +
>  .../devicetree/bindings/net/marvell,prestera.txt   |  50 ++++
>  .../pinctrl/marvell,armada-98dx3236-pinctrl.txt    |  46 ++++
>  arch/arm/boot/dts/armada-xp-98dx3236.dtsi          | 254 +++++++++++++++++++++
>  arch/arm/boot/dts/armada-xp-98dx3336.dtsi          |  76 ++++++
>  arch/arm/boot/dts/armada-xp-98dx4251.dtsi          |  90 ++++++++
>  arch/arm/boot/dts/db-dxbc2.dts                     | 151 ++++++++++++
>  arch/arm/boot/dts/db-xc3-24g4xg.dts                | 142 ++++++++++++
>  arch/arm/mach-mvebu/platsmp.c                      |  86 +++++++
>  drivers/clk/mvebu/armada-xp.c                      |  39 ++++
>  drivers/clk/mvebu/clk-corediv.c                    |  23 ++
>  drivers/clk/mvebu/clk-cpu.c                        |   8 +
>  drivers/pinctrl/mvebu/pinctrl-armada-xp.c          | 156 +++++++++++++
>  17 files changed, 1163 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>  create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
>  create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>  create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>  create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>  create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>  create mode 100644 arch/arm/boot/dts/db-dxbc2.dts
>  create mode 100644 arch/arm/boot/dts/db-xc3-24g4xg.dts
>
> interdiff to v4:
>
>  diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
>  index 520562a7dc2a..c7b4e3a6b2c6 100644
> @@ -85,7 +86,7 @@
>           by address and length of the PMU DFS registers
>   - #clock-cells : should be set to 1.
>  diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
> -index b3094315a3c0..0413bf8284e0 100644
> +index b3094315a3c0..890a863ae0d0 100644
>  --- a/drivers/clk/mvebu/armada-xp.c
>  +++ b/drivers/clk/mvebu/armada-xp.c
>   	return 250000000;
> @@ -118,9 +119,6 @@
>  +static const struct coreclk_soc_desc mv98dx3236_coreclks = {
>  +	.get_tclk_freq = mv98dx3236_get_tclk_freq,
>  +	.get_cpu_freq = mv98dx3236_get_cpu_freq,
> -+	.get_clk_ratio = NULL,
> -+	.ratios = NULL,
> -+	.num_ratios = 0,
>  +};
>  +
>   /*
> @@ -200,53 +198,16 @@
>  +CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
>  +	       mv98dx3236_corediv_clk_init);
>  diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
> -index 5837eb8a212f..3b8f0e14fa01 100644
> +index 5837eb8a212f..044892b6534d 100644
>  --- a/drivers/clk/mvebu/clk-cpu.c
>  +++ b/drivers/clk/mvebu/clk-cpu.c
> - 	.set_rate = clk_cpu_set_rate,
> - };
> - 
> --static void __init of_cpu_clk_setup(struct device_node *node)
> -+/* Add parameter to allow this to support different clock operations. */
> -+static void __init _of_cpu_clk_setup(struct device_node *node,
> -+			const struct clk_ops *cpu_clk_ops)
> - {
> - 	struct cpu_clk *cpuclk;
> - 	void __iomem *clock_complex_base = of_iomap(node, 0);
> - 		cpuclk[cpu].hw.init = &init;
>   
> - 		init.name = cpuclk[cpu].clk_name;
> --		init.ops = &cpu_ops;
> -+		init.ops = cpu_clk_ops;
> - 		init.flags = 0;
> - 		init.parent_names = &cpuclk[cpu].parent_name;
> - 		init.num_parents = 1;
> - 	iounmap(clock_complex_base);
> - }
> - 
> -+/* Use this function to call the generic setup with the correct
> -+ * clock operation
> -+ */
> -+static void __init of_cpu_clk_setup(struct device_node *node)
> -+{
> -+	_of_cpu_clk_setup(node, &cpu_ops);
> -+}
> -+
>   CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
>   					 of_cpu_clk_setup);
>  +
> -+/* Define the clock and operations for the mv98dx3236 - it cannot perform
> -+ * any operations.
> -+ */
> -+static const struct clk_ops mv98dx3236_cpu_ops = {
> -+	.recalc_rate = NULL,
> -+	.round_rate = NULL,
> -+	.set_rate = NULL,
> -+};
> -+
>  +static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
>  +{
> -+	_of_cpu_clk_setup(node, &mv98dx3236_cpu_ops);
> ++	of_clk_add_provider(node, of_clk_src_simple_get, NULL);
>  +}
>  +
>  +CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
> @@ -285,7 +247,7 @@
>   			    "qcom,gcc-msm8660"
>  diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>  new file mode 100644
> -index 000000000000..8082ba872edd
> +index 000000000000..26eb9d3aa630
>  --- /dev/null
>  +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>  +Resume Control
> @@ -304,10 +266,8 @@
>  +	compatible = "marvell,98dx3336-resume-ctrl";
>  +	reg = <0x20980 0x10>;
>  +};
> -+
> -+
>  diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
> -index 46c742d3bd41..59be3ca0464f 100644
> +index 46c742d3bd41..a5b464497e1a 100644
>  --- a/arch/arm/mach-mvebu/platsmp.c
>  +++ b/arch/arm/mach-mvebu/platsmp.c
>   
> @@ -327,7 +287,7 @@
>  +static const struct of_device_id of_mv98dx3236_resume_table[] = {
>  +	{
>  +		.compatible = "marvell,98dx3336-resume-ctrl",
> -+		.data = (void *)&mv98dx3336_resume_controller,
> ++		.data = &mv98dx3336_resume_controller,
>  +	},
>  +	{ /* end of list */ },
>  +};
> @@ -337,7 +297,7 @@
>  +	const struct of_device_id *match;
>  +	struct device_node *np;
>  +	void __iomem *base;
> -+	struct resume_controller *rc;
> ++	const struct resume_controller *rc;
>  +
>  +	WARN_ON(hw_cpu != 1);
>  +
> @@ -347,7 +307,7 @@
>  +		return -ENODEV;
>  +
>  +	base = of_io_request_and_map(np, 0, of_node_full_name(np));
> -+	rc = (struct resume_controller *)match->data;
> ++	rc = match->data;
>  +	of_node_put(np);
>  +	if (IS_ERR(base))
>  +		return PTR_ERR(base);
> @@ -411,15 +371,17 @@
>  diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>  new file mode 100644
> -index 000000000000..d4e6ecdfc853
> +index 000000000000..97aef67ee769
>  --- /dev/null
>  +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>  +* Marvell 98dx3236 pinctrl driver for mpp
> @@ -435,41 +397,41 @@
>  +
>  +name          pins     functions
>  +================================================================================
> -+mpp0          0        gpio, spi0(mosi), dev(ad8)
> ++mpp0          0        gpo, spi0(mosi), dev(ad8)
>  +mpp1          1        gpio, spi0(miso), dev(ad9)
> -+mpp2          2        gpio, spi0(sck), dev(ad10)
> ++mpp2          2        gpo, spi0(sck), dev(ad10)
>  +mpp3          3        gpio, spi0(cs0), dev(ad11)
>  +mpp4          4        gpio, spi0(cs1), smi(mdc), dev(cs0)
>  +mpp5          5        gpio, pex(rsto), sd0(cmd), dev(bootcs)
> -+mpp6          6        gpio, sd0(clk), dev(a2)
> ++mpp6          6        gpo, sd0(clk), dev(a2)
>  +mpp7          7        gpio, sd0(d0), dev(ale0)
>  +mpp8          8        gpio, sd0(d1), dev(ale1)
>  +mpp9          9        gpio, sd0(d2), dev(ready0)
>  +mpp10         10       gpio, sd0(d3), dev(ad12)
>  +mpp11         11       gpio, uart1(rxd), uart0(cts), dev(ad13)
> -+mpp12         12       gpio, uart1(txd), uart0(rts), dev(ad14)
> ++mpp12         12       gpo, uart1(txd), uart0(rts), dev(ad14)
>  +mpp13         13       gpio, intr(out), dev(ad15)
>  +mpp14         14       gpio, i2c0(sck)
>  +mpp15         15       gpio, i2c0(sda)
> -+mpp16         16       gpio, dev(oe)
> -+mpp17         17       gpio, dev(clk)
> ++mpp16         16       gpo, dev(oe)
> ++mpp17         17       gpo, dev(clkout)
>  +mpp18         18       gpio, uart1(txd)
>  +mpp19         19       gpio, uart1(rxd), dev(rb)
> -+mpp20         20       gpio, dev(we)
> -+mpp21         21       gpio, dev(ad0)
> -+mpp22         22       gpio, dev(ad1)
> -+mpp23         23       gpio, dev(ad2)
> -+mpp24         24       gpio, dev(ad3)
> -+mpp25         25       gpio, dev(ad4)
> -+mpp26         26       gpio, dev(ad5)
> -+mpp27         27       gpio, dev(ad6)
> -+mpp28         28       gpio, dev(ad7)
> -+mpp29         29       gpio, dev(a0)
> -+mpp30         30       gpio, dev(a1)
> ++mpp20         20       gpo, dev(we0)
> ++mpp21         21       gpo, dev(ad0)
> ++mpp22         22       gpo, dev(ad1)
> ++mpp23         23       gpo, dev(ad2)
> ++mpp24         24       gpo, dev(ad3)
> ++mpp25         25       gpo, dev(ad4)
> ++mpp26         26       gpo, dev(ad5)
> ++mpp27         27       gpo, dev(ad6)
> ++mpp28         28       gpo, dev(ad7)
> ++mpp29         29       gpo, dev(a0)
> ++mpp30         30       gpo, dev(a1)
>  +mpp31         31       gpio, slv_smi(mdc), smi(mdc), dev(we1)
>  +mpp32         32       gpio, slv_smi(mdio), smi(mdio), dev(cs1)
>  diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
> -index e4ea71a9d985..554eeae8cd21 100644
> +index 63e1bd506983..61cbc138703e 100644
>  --- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>  +++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>   	V_MV78460	= BIT(2),
> @@ -495,8 +457,8 @@
>  +		 MPP_VAR_FUNCTION(0x2, "spi0", "miso",       V_98DX3236_PLUS),
>  +		 MPP_VAR_FUNCTION(0x4, "dev", "ad9",         V_98DX3236_PLUS)),
>  +	MPP_MODE(2,
> -+		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,         V_98DX3236_PLUS),
> -+		 MPP_VAR_FUNCTION(0x2, "spi0", "csk",        V_98DX3236_PLUS),
> ++		 MPP_VAR_FUNCTION(0x0, "gpo", NULL,          V_98DX3236_PLUS),
> ++		 MPP_VAR_FUNCTION(0x2, "spi0", "sck",        V_98DX3236_PLUS),
>  +		 MPP_VAR_FUNCTION(0x4, "dev", "ad10",        V_98DX3236_PLUS)),
>  +	MPP_MODE(3,
>  +		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,         V_98DX3236_PLUS),
> @@ -511,7 +473,7 @@
>  +		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,         V_98DX3236_PLUS),
>  +		 MPP_VAR_FUNCTION(0x1, "pex", "rsto",        V_98DX3236_PLUS),
>  +		 MPP_VAR_FUNCTION(0x2, "sd0", "cmd",         V_98DX4251),
> -+		 MPP_VAR_FUNCTION(0x4, "dev", "bootcs0",     V_98DX3236_PLUS)),
> ++		 MPP_VAR_FUNCTION(0x4, "dev", "bootcs",      V_98DX3236_PLUS)),
>  +	MPP_MODE(6,
>  +		 MPP_VAR_FUNCTION(0x0, "gpo", NULL,          V_98DX3236_PLUS),
>  +		 MPP_VAR_FUNCTION(0x2, "sd0", "clk",         V_98DX4251),
> @@ -563,7 +525,8 @@
>  +		 MPP_VAR_FUNCTION(0x3, "uart1", "txd",       V_98DX3236_PLUS)),
>  +	MPP_MODE(19,
>  +		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,         V_98DX3236_PLUS),
> -+		 MPP_VAR_FUNCTION(0x3, "uart1", "rxd",       V_98DX3236_PLUS)),
> ++		 MPP_VAR_FUNCTION(0x3, "uart1", "rxd",       V_98DX3236_PLUS),
> ++		 MPP_VAR_FUNCTION(0x4, "dev", "rb",          V_98DX3236_PLUS)),
>  +	MPP_MODE(20,
>  +		 MPP_VAR_FUNCTION(0x0, "gpo", NULL,          V_98DX3236_PLUS),
>  +		 MPP_VAR_FUNCTION(0x4, "dev", "we0",         V_98DX3236_PLUS)),
> @@ -630,11 +593,11 @@
>   };
>   
>  +static struct mvebu_mpp_ctrl mv98dx3236_mpp_controls[] = {
> -+	MPP_FUNC_CTRL(0, 32, NULL, armada_xp_mpp_ctrl),
> ++	MPP_FUNC_CTRL(0, 32, NULL, mvebu_mmio_mpp_ctrl),
>  +};
>  +
>  +static struct pinctrl_gpio_range mv98dx3236_mpp_gpio_ranges[] = {
> -+	MPP_GPIO_RANGE(0,   0,  0, 32),
> ++	MPP_GPIO_RANGE(0, 0, 0, 32),
>  +};
>  +
>   static int armada_xp_pinctrl_suspend(struct platform_device *pdev,
> @@ -767,7 +731,7 @@
>  +};
>  diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>  new file mode 100644
> -index 000000000000..4b7b2fe3b682
> +index 000000000000..9461128fae24
>  --- /dev/null
>  +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>  +/*
> @@ -785,17 +749,17 @@
>  + *     published by the Free Software Foundation; either version 2 of the
>  + *     License, or (at your option) any later version.
>  + *
> -+ *     This file is distributed in the hope that it will be useful
> ++ *     This file is distributed in the hope that it will be useful,
>  + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>  + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>  + *     GNU General Public License for more details.
>  + *
> -+ * Or, alternatively
> ++ * Or, alternatively,
>  + *
>  + *  b) Permission is hereby granted, free of charge, to any person
>  + *     obtaining a copy of this software and associated documentation
>  + *     files (the "Software"), to deal in the Software without
> -+ *     restriction, including without limitation the rights to use
> ++ *     restriction, including without limitation the rights to use,
>  + *     copy, modify, merge, publish, distribute, sublicense, and/or
>  + *     sell copies of the Software, and to permit persons to whom the
>  + *     Software is furnished to do so, subject to the following
> @@ -804,11 +768,11 @@
>  + *     The above copyright notice and this permission notice shall be
>  + *     included in all copies or substantial portions of the Software.
>  + *
> -+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> ++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>  + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>  + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>  + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> -+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> ++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>  + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>  + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>  + *     OTHER DEALINGS IN THE SOFTWARE.
> @@ -851,9 +815,9 @@
>  +			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>  +
>  +		/*
> -+		 * 98DX3236 has 1 x1 PCIe unit Gen2.0: One unit can be
> ++		 * 98DX3236 has 1 x1 PCIe unit Gen2.0
>  +		 */
> -+		pcie-controller {
> ++		pciec: pcie-controller@82000000 {
>  +			compatible = "marvell,armada-xp-pcie";
>  +			status = "disabled";
>  +			device_type = "pci";
> @@ -870,7 +834,7 @@
>  +				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
>  +				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
>  +
> -+			pcie@1,0 {
> ++			pcie1: pcie@1,0 {
>  +				device_type = "pci";
>  +				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
>  +				reg = <0x0800 0 0 0 0>;
> @@ -967,7 +931,7 @@
>  +			};
>  +		};
>  +
> -+		dfx-registers {
> ++		dfxr: dfx-registers@ac000000 {
>  +			compatible = "simple-bus";
>  +			#address-cells = <1>;
>  +			#size-cells = <1>;
> @@ -987,7 +951,7 @@
>  +			};
>  +		};
>  +
> -+		switch {
> ++		switch: switch@a8000000 {
>  +			compatible = "simple-bus";
>  +			#address-cells = <1>;
>  +			#size-cells = <1>;
> @@ -1026,7 +990,7 @@
>  +};
>  diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>  new file mode 100644
> -index 000000000000..a9b0f47f8df9
> +index 000000000000..e1580afdc260
>  --- /dev/null
>  +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>  +/*
> @@ -1044,17 +1008,17 @@
>  + *     published by the Free Software Foundation; either version 2 of the
>  + *     License, or (at your option) any later version.
>  + *
> -+ *     This file is distributed in the hope that it will be useful
> ++ *     This file is distributed in the hope that it will be useful,
>  + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>  + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>  + *     GNU General Public License for more details.
>  + *
> -+ * Or, alternatively
> ++ * Or, alternatively,
>  + *
>  + *  b) Permission is hereby granted, free of charge, to any person
>  + *     obtaining a copy of this software and associated documentation
>  + *     files (the "Software"), to deal in the Software without
> -+ *     restriction, including without limitation the rights to use
> ++ *     restriction, including without limitation the rights to use,
>  + *     copy, modify, merge, publish, distribute, sublicense, and/or
>  + *     sell copies of the Software, and to permit persons to whom the
>  + *     Software is furnished to do so, subject to the following
> @@ -1063,16 +1027,16 @@
>  + *     The above copyright notice and this permission notice shall be
>  + *     included in all copies or substantial portions of the Software.
>  + *
> -+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> ++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>  + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>  + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>  + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> -+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> ++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>  + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>  + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>  + *     OTHER DEALINGS IN THE SOFTWARE.
>  + *
> -+ * Contains definitions specific to the 98dx3336 SoC that are not
> ++ * Contains definitions specific to the 98dx3236 SoC that are not
>  + * common to all Armada XP SoCs.
>  + */
>  +
> @@ -1107,7 +1071,7 @@
>  +};
>  diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>  new file mode 100644
> -index 000000000000..446e6e65ec59
> +index 000000000000..4b0533a4ccb7
>  --- /dev/null
>  +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>  +/*
> @@ -1125,17 +1089,17 @@
>  + *     published by the Free Software Foundation; either version 2 of the
>  + *     License, or (at your option) any later version.
>  + *
> -+ *     This file is distributed in the hope that it will be useful
> ++ *     This file is distributed in the hope that it will be useful,
>  + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>  + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>  + *     GNU General Public License for more details.
>  + *
> -+ * Or, alternatively
> ++ * Or, alternatively,
>  + *
>  + *  b) Permission is hereby granted, free of charge, to any person
>  + *     obtaining a copy of this software and associated documentation
>  + *     files (the "Software"), to deal in the Software without
> -+ *     restriction, including without limitation the rights to use
> ++ *     restriction, including without limitation the rights to use,
>  + *     copy, modify, merge, publish, distribute, sublicense, and/or
>  + *     sell copies of the Software, and to permit persons to whom the
>  + *     Software is furnished to do so, subject to the following
> @@ -1144,11 +1108,11 @@
>  + *     The above copyright notice and this permission notice shall be
>  + *     included in all copies or substantial portions of the Software.
>  + *
> -+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> ++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>  + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>  + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>  + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> -+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> ++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>  + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>  + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>  + *     OTHER DEALINGS IN THE SOFTWARE.
> @@ -1213,15 +1177,15 @@
>  diff --git a/arch/arm/boot/dts/db-dxbc2.dts b/arch/arm/boot/dts/db-dxbc2.dts
>  new file mode 100644
> -index 000000000000..f56786cea5f8
> +index 000000000000..a8130805074e
>  --- /dev/null
>  +++ b/arch/arm/boot/dts/db-dxbc2.dts
>  +/*
> @@ -1241,17 +1205,17 @@
>  + *     published by the Free Software Foundation; either version 2 of the
>  + *     License, or (at your option) any later version.
>  + *
> -+ *     This file is distributed in the hope that it will be useful
> ++ *     This file is distributed in the hope that it will be useful,
>  + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>  + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>  + *     GNU General Public License for more details.
>  + *
> -+ * Or, alternatively
> ++ * Or, alternatively,
>  + *
>  + *  b) Permission is hereby granted, free of charge, to any person
>  + *     obtaining a copy of this software and associated documentation
>  + *     files (the "Software"), to deal in the Software without
> -+ *     restriction, including without limitation the rights to use
> ++ *     restriction, including without limitation the rights to use,
>  + *     copy, modify, merge, publish, distribute, sublicense, and/or
>  + *     sell copies of the Software, and to permit persons to whom the
>  + *     Software is furnished to do so, subject to the following
> @@ -1260,11 +1224,11 @@
>  + *     The above copyright notice and this permission notice shall be
>  + *     included in all copies or substantial portions of the Software.
>  + *
> -+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> ++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>  + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>  + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>  + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> -+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> ++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>  + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>  + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>  + *     OTHER DEALINGS IN THE SOFTWARE.
> @@ -1295,66 +1259,58 @@
>  +		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
>  +	};
>  +
> -+	soc {
> -+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
> -+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
> -+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
> -+			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
> -+			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
> ++};
>  +
> -+		devbus-bootcs {
> -+			status = "okay";
> ++&devbus_bootcs {
> ++	status = "okay";
>  +
> -+			/* Device Bus parameters are required */
> ++	/* Device Bus parameters are required */
>  +
> -+			/* Read parameters */
> -+			devbus,bus-width    = <16>;
> -+			devbus,turn-off-ps  = <60000>;
> -+			devbus,badr-skew-ps = <0>;
> -+			devbus,acc-first-ps = <124000>;
> -+			devbus,acc-next-ps  = <248000>;
> -+			devbus,rd-setup-ps  = <0>;
> -+			devbus,rd-hold-ps   = <0>;
> -+
> -+			/* Write parameters */
> -+			devbus,sync-enable = <0>;
> -+			devbus,wr-high-ps  = <60000>;
> -+			devbus,wr-low-ps   = <60000>;
> -+			devbus,ale-wr-ps   = <60000>;
> -+		};
> ++	/* Read parameters */
> ++	devbus,bus-width    = <16>;
> ++	devbus,turn-off-ps  = <60000>;
> ++	devbus,badr-skew-ps = <0>;
> ++	devbus,acc-first-ps = <124000>;
> ++	devbus,acc-next-ps  = <248000>;
> ++	devbus,rd-setup-ps  = <0>;
> ++	devbus,rd-hold-ps   = <0>;
> ++
> ++	/* Write parameters */
> ++	devbus,sync-enable = <0>;
> ++	devbus,wr-high-ps  = <60000>;
> ++	devbus,wr-low-ps   = <60000>;
> ++	devbus,ale-wr-ps   = <60000>;
> ++};
>  +
> -+		internal-regs {
> -+			serial@12000 {
> -+				status = "okay";
> -+			};
> -+			serial@12100 {
> -+				status = "okay";
> -+			};
> ++&i2c0 {
> ++	clock-frequency = <100000>;
> ++	status = "okay";
> ++};
>  +
> -+			i2c@11000 {
> -+				clock-frequency = <100000>;
> -+				status = "okay";
> -+			};
> ++&uart0 {
> ++	status = "okay";
> ++};
>  +
> -+			mvsdio@d4000 {
> -+				pinctrl-0 = <&sdio_pins>;
> -+				pinctrl-names = "default";
> -+				status = "okay";
> -+				/* No CD or WP GPIOs */
> -+				broken-cd;
> -+			};
> ++&uart1 {
> ++	status = "okay";
> ++};
>  +
> -+			nand@d0000 {
> -+				status = "okay";
> -+				num-cs = <1>;
> -+				marvell,nand-keep-config;
> -+				marvell,nand-enable-arbiter;
> -+				nand-on-flash-bbt;
> -+				nand-ecc-strength = <4>;
> -+				nand-ecc-step-size = <512>;
> -+			};
> -+		};
> -+	};
> ++&nand {
> ++	status = "okay";
> ++	num-cs = <1>;
> ++	marvell,nand-keep-config;
> ++	marvell,nand-enable-arbiter;
> ++	nand-on-flash-bbt;
> ++	nand-ecc-strength = <4>;
> ++	nand-ecc-step-size = <512>;
> ++};
> ++
> ++&sdio {
> ++	pinctrl-0 = <&sdio_pins>;
> ++	pinctrl-names = "default";
> ++	status = "okay";
> ++	/* No CD or WP GPIOs */
> ++	broken-cd;
>  +};
>  +
>  +&spi0 {
> @@ -1385,7 +1341,7 @@
>  +};
>  diff --git a/arch/arm/boot/dts/db-xc3-24g4xg.dts b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>  new file mode 100644
> -index 000000000000..5eb89ffb9a7d
> +index 000000000000..4e07cb6ed800
>  --- /dev/null
>  +++ b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>  +/*
> @@ -1405,17 +1361,17 @@
>  + *     published by the Free Software Foundation; either version 2 of the
>  + *     License, or (at your option) any later version.
>  + *
> -+ *     This file is distributed in the hope that it will be useful
> ++ *     This file is distributed in the hope that it will be useful,
>  + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>  + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>  + *     GNU General Public License for more details.
>  + *
> -+ * Or, alternatively
> ++ * Or, alternatively,
>  + *
>  + *  b) Permission is hereby granted, free of charge, to any person
>  + *     obtaining a copy of this software and associated documentation
>  + *     files (the "Software"), to deal in the Software without
> -+ *     restriction, including without limitation the rights to use
> ++ *     restriction, including without limitation the rights to use,
>  + *     copy, modify, merge, publish, distribute, sublicense, and/or
>  + *     sell copies of the Software, and to permit persons to whom the
>  + *     Software is furnished to do so, subject to the following
> @@ -1424,11 +1380,11 @@
>  + *     The above copyright notice and this permission notice shall be
>  + *     included in all copies or substantial portions of the Software.
>  + *
> -+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> ++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>  + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>  + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>  + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> -+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> ++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>  + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>  + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>  + *     OTHER DEALINGS IN THE SOFTWARE.
> @@ -1458,63 +1414,50 @@
>  +		device_type = "memory";
>  +		reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
>  +	};
> ++};
>  +
> -+	soc {
> -+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
> -+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
> -+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
> -+			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
> -+			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
> -+
> -+		devbus-bootcs {
> -+			status = "okay";
> ++&devbus_bootcs {
> ++	status = "okay";
>  +
> -+			/* Device Bus parameters are required */
> ++	/* Device Bus parameters are required */
>  +
> -+			/* Read parameters */
> -+			devbus,bus-width    = <16>;
> -+			devbus,turn-off-ps  = <60000>;
> -+			devbus,badr-skew-ps = <0>;
> -+			devbus,acc-first-ps = <124000>;
> -+			devbus,acc-next-ps  = <248000>;
> -+			devbus,rd-setup-ps  = <0>;
> -+			devbus,rd-hold-ps   = <0>;
> -+
> -+			/* Write parameters */
> -+			devbus,sync-enable = <0>;
> -+			devbus,wr-high-ps  = <60000>;
> -+			devbus,wr-low-ps   = <60000>;
> -+			devbus,ale-wr-ps   = <60000>;
> -+		};
> ++	/* Read parameters */
> ++	devbus,bus-width    = <16>;
> ++	devbus,turn-off-ps  = <60000>;
> ++	devbus,badr-skew-ps = <0>;
> ++	devbus,acc-first-ps = <124000>;
> ++	devbus,acc-next-ps  = <248000>;
> ++	devbus,rd-setup-ps  = <0>;
> ++	devbus,rd-hold-ps   = <0>;
> ++
> ++	/* Write parameters */
> ++	devbus,sync-enable = <0>;
> ++	devbus,wr-high-ps  = <60000>;
> ++	devbus,wr-low-ps   = <60000>;
> ++	devbus,ale-wr-ps   = <60000>;
> ++};
>  +
> -+		internal-regs {
> -+			serial@12000 {
> -+				status = "okay";
> -+			};
> -+			serial@12100 {
> -+				status = "okay";
> -+			};
> ++&uart0 {
> ++	status = "okay";
> ++};
>  +
> -+			i2c@11000 {
> -+				clock-frequency = <100000>;
> -+				status = "okay";
> -+			};
> ++&uart1 {
> ++	status = "okay";
> ++};
>  +
> -+			mvsdio@d4000 {
> -+				status = "disabled";
> -+			};
> ++&i2c0 {
> ++	clock-frequency = <100000>;
> ++	status = "okay";
> ++};
>  +
> -+			nand@d0000 {
> -+				status = "okay";
> -+				num-cs = <1>;
> -+				marvell,nand-keep-config;
> -+				marvell,nand-enable-arbiter;
> -+				nand-on-flash-bbt;
> -+				nand-ecc-strength = <4>;
> -+				nand-ecc-step-size = <512>;
> -+			};
> -+		};
> -+	};
> ++&nand {
> ++	status = "okay";
> ++	num-cs = <1>;
> ++	marvell,nand-keep-config;
> ++	marvell,nand-enable-arbiter;
> ++	nand-on-flash-bbt;
> ++	nand-ecc-strength = <4>;
> ++	nand-ecc-step-size = <512>;
>  +};
>  +
>  +&spi0 {
>
> -- 
> 2.11.0.24.ge6920cf
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux