Re: [PATCH v3 00/24] i.MX Media Driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, 2017-01-20 at 21:39 +0100, Hans Verkuil wrote:
[...]
> > There is a VDIC entity in the i.MX IPU that performs de-interlacing with
> > hardware filters for motion compensation. Some of the motion compensation
> > modes ("low" and "medium" motion) require that the VDIC receive video
> > frame fields from memory buffers (dedicated dma channels in the
> > IPU are used to transfer those buffers into the VDIC).
> > 
> > So one option to support those modes would be to pass the raw buffers
> > from a camera sensor up to userspace to a capture device, and then pass
> > them back to the VDIC for de-interlacing using a mem2mem device.
> > 
> > Philipp and I are both in agreement that, since userland is not interested
> > in the intermediate interlaced buffers in this case, but only the final
> > result (motion compensated, de-interlaced frames), it is more efficient
> > to provide a media link that allows passing those intermediate frames
> > directly from a camera source pad to VDIC sink pad, without having
> > to route them through userspace.
> > 
> > So in order to support that, I've implemented a simple FIFO dma buffer
> > queue in the driver to allow passing video buffers directly from a source
> > to a sink. It is modeled loosely off the vb2 state machine and API, but
> > simpler (for instance it only allows contiguous, cache-coherent buffers).
> > 
> > This is where Philipp has an argument, that this should be done with a
> > new API in videobuf2.

That is one part of the argument. I'm glad to understand now that we
agree about this.

> > And I'm actually in total agreement with that. I definitely agree that there
> > should be a mechanism in the media framework that allows passing video
> > buffers from a source pad to a sink pad using a software queue, with no
> > involvement from userland.

That is the other part of the argument. I do not agree that these
software queue "links" should be presented to userspace as media pad
links between two entities of a media device. 

First, that would limit the links to subdevices contained in the same
media graph, while this should work between any two capture and output
queues of different devices.
Assume for example, we want to encode the captured, deinterlaced video
to h.264 with the coda VPU driver. A software queue link could be
established between the CSI capture and the VDIC deinterlacer input,
just as between the VDIC deinterlacer output and the coda VPU input.
Technically, there would be no difference between those two linked
capture/output queue pairs. But the coda driver is a completely separate
mem2mem device. And since it is not part of the i.MX media graph, there
is no entity pad to link to.
Or assume there is an USB analog capture device that produces interlaced
frames. I think it should be possible to connect its capture queue to
the VDIC deinterlacer output queue just the same way as linking the CSI
to the VDIC (in software queue mode).

Second, the subdevice pad formats describe wire formats, not memory
formats. The user might want to choose between 4:2:2 and 4:2:0
subsampled YUV formats for the intermediate buffer, for example,
depending on memory bandwidth constraints and quality requirements. This
is impossible with the media entity / subdevice pad links.

I think an interface where userspace configures the capture and output
queues via v4l2 API, passes dma buffers around from one to the other
queue, and then puts both queues into a free running mode would be a
much better fit for this mechanism.

> > My only disagreement is when this should be implemented. I think it is
> > fine to keep my custom implementation of this in the driver for now. Once
> > an extension of vb2 is ready to support this feature, it would be fairly
> > straightforward to strip out my custom implementation and go with the
> > new API.
> 
> For a staging driver this isn't necessary, as long as it is documented in
> the TODO file that this needs to be fixed before it can be moved out of
> staging. The whole point of staging is that there is still work to be
> done in the driver, after all :-)

Absolutely. The reason I am arguing against merging the mem2mem media
control links so vehemently is that I am convinced the userspace
interface is wrong, and I am afraid that even though in staging, it
might become established.

regards
Philipp

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux