This series add support for the SAR ADC on Amlogic Meson GXBB, GXL and
GXM SoCs.
The hardware on GXBB provides 10-bit ADC results, while GXL and GXM are
providing 12-bit results. Support for older SoCs (Meson8b and Meson8)
can be added with little effort, most of which is testing I guess (I
don't have any pre-GXBB hardware so I can't say).
A new set of clocks had to be added to the GXBB clock controller (used
by the GXBB/GXL/GXM SoCs) which are required to get the ADC working.
The ADC itself can sample multiple channels at the same time and allows
capturing multiple samples (which can be used for filtering/averaging).
The ADC results are stored inside a FIFO register. More details on what
the driver supports (or doesn't) can be found in the description of
patch #3.
The code is based on the public S805 (Meson8b) and S905 (GXBB)
datasheets, as well as by reading (various versions of) the vendor
driver and by inspecting the registers on the vendor kernels of my
testing-hardware.
Typical use-cases for the ADC on the Meson GX SoCs are:
- adc-keys ("ADC attached resistor ladder buttons")
- SoC temperature measurement (not supported by this driver yet as
the system firmware does this already and provides the values via the
SCPI protocol)
- "version-strapping" (different resistor values are used to indicate
the board-revision)
- and of course typical ADC measurements
Thanks to Heiner Kallweit, Jonathan Cameron, Lars-Peter Clausen and
Peter Meerwald-Stadler for reviewing this series and providing valuable
input!
Changes since v3 [0]:
- removed the clock patch (patch #2 in older versions) because it is
already applied into Kevin's (linux-amlogic.git) v4.11/dt64 branch
- introduced a separate compatible string for "amlogic,meson-gxm-saradc"
(and updated the documentation, changed meson-gxm.dtsi and adjusted
the driver accordingly, affects all remaining patches)
- use __maybe_unused instead of #ifdef CONFIG_PM_SLEEP for the _suspend
and _resume functions (affects patch #2 only)
- fixed a grammar issue in the commit description of patch #3 (thanks
Andreas Färber)
- rebased .dts changes on top of Andreas Färber's Amlogic dts cleanup
(affects patch #3 only)
- moved reg property right after the compatible property and moved the
status property to the end of the saradc node (affects patch #3 only)
Changes since v2 (all changes are for patch #3, except where noted):
- fixed another typo in the interrupt (patch #4, thanks again Heiner
Kallweit)
- change namespace of all register #defines to MESON_SAR_ADC (I
intentionally decided to keep SAR_ADC in it because that's the way
registers are named in the datasheet, thus making it easy to match the
registers without having to look up the offset all the time)
- added additional parenthesis around MACRO parameters for extra safety
- removed unused definition for SAR_ADC_REG3_ADC_CLK_DIV_MASK (as we
already have SAR_ADC_REG3_ADC_CLK_DIV_SHIFT and
SAR_ADC_REG3_ADC_CLK_DIV_WIDTH which are used instead)
- change value of "indexed" from "true" to "1"
- remove type parameter from MESON_SAR_ADC_CHAN macro as all channels are
currently IIO_VOLTAGE channels
- fixed another multi-line comment style violation
- added timeout to meson_saradc_lock() (unlikely to be triggered, but
better safe then sorry - which would mean that we'd be keeping one core
busy infinitely)
- fixed meson_saradc_remove() call order (first unregister the iio_dev,
then disable the hardware instead of the other way around)
- use "consistent prefixing", which means that all #defines now use
MESON_SAR_ADC_ as prefix, while all enums, static global variables,
structs and functions use meson_sar_adc_ as prefix
- rebased .dts and clk patches to apply to khilman's latest v4.11/dt64
(a minor conflict had to be resolved in the clk patch due to
"clk: meson-gxbb: Export HDMI clocks")
- added Tested-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> to all
patches (thanks for testing!)
Changes since v1 (all changes are for patch #3, except where noted):
- fix IRQ number in meson-gx.dtsi (thanks to Heiner Kallweit for
providing the correct value), affects patch #4
- move the most used members of meson_saradc_priv to the beginning
- remove unused struct member "completion" from meson_saradc_priv
- use devm_kasprintf() instead of snprintf() + devm_kstrdup()
- initialize indio_dev->dev.parent earlier in meson_saradc_probe()
- moved meson_saradc_clear_fifo() logic to a separate function
- add comment why a do ... while loop is required in
meson_saradc_wait_busy_clear()
- remove SAR_ADC_NUM_CHANNELS and SAR_ADC_VALUE_MASK macros (each of them
was only used once and it's an unneeded level of abstraction)
- fixed multiline comment syntax violations
- dropped unneeded log messages during initialization
- set iio_dev name to "meson-gxbb-saradc" or "meson-gxl-saradc"
- use "indio_dev->dev.parent" in all kernel log calls (dev_warn/err/etc)
to make it show the OF node name (instead of the iio device name)
- introduce struct meson_saradc_data to hold platform-specific
information (such as resolution in bits and the iio_dev name)
[0] http://marc.info/?l=linux-iio&m=148483794819784&w=2
Martin Blumenstingl (3):
Documentation: dt-bindings: add the Amlogic Meson SAR ADC
documentation
iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs
ARM64: dts: meson: meson-gx: add the SAR ADC
.../bindings/iio/adc/amlogic,meson-saradc.txt | 32 +
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 8 +
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 10 +
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 10 +
arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 4 +
drivers/iio/adc/Kconfig | 12 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/meson_saradc.c | 922 +++++++++++++++++++++
8 files changed, 999 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
create mode 100644 drivers/iio/adc/meson_saradc.c
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
