This adds the devicetree binding documentation for the SAR ADC found in
Amlogic Meson SoCs.
Currently only the GXBB, GXL and GXM SoCs are supported.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Tested-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Reviewed-by: Andreas Färber <afaerber@xxxxxxx>
---
.../bindings/iio/adc/amlogic,meson-saradc.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
new file mode 100644
index 000000000000..f9e3ff2c656e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
@@ -0,0 +1,32 @@
+* Amlogic Meson SAR (Successive Approximation Register) A/D converter
+
+Required properties:
+- compatible: depending on the SoC this should be one of:
+ - "amlogic,meson-gxbb-saradc" for GXBB
+ - "amlogic,meson-gxl-saradc" for GXL
+ - "amlogic,meson-gxm-saradc" for GXM
+ along with the generic "amlogic,meson-saradc"
+- reg: the physical base address and length of the registers
+- clocks: phandle and clock identifier (see clock-names)
+- clock-names: mandatory clocks:
+ - "clkin" for the reference clock (typically XTAL)
+ - "core" for the SAR ADC core clock
+ optional clocks:
+ - "sana" for the analog clock
+ - "adc_clk" for the ADC (sampling) clock
+ - "adc_sel" for the ADC (sampling) clock mux
+- vref-supply: the regulator supply for the ADC reference voltage
+- #io-channel-cells: must be 1, see ../iio-bindings.txt
+
+Example:
+ saradc: adc@8680 {
+ compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+ #io-channel-cells = <1>;
+ reg = <0x0 0x8680 0x0 0x34>;
+ clocks = <&xtal>,
+ <&clkc CLKID_SAR_ADC>,
+ <&clkc CLKID_SANA>,
+ <&clkc CLKID_SAR_ADC_CLK>,
+ <&clkc CLKID_SAR_ADC_SEL>;
+ clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+ };
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
