On Tue, Jan 3, 2017 at 8:47 AM, Rob Herring <robh@xxxxxxxxxx> wrote: > On Sun, Dec 25, 2016 at 09:44:41PM -0800, Matt Ranostay wrote: >> Signed-off-by: Matt Ranostay <matt@ranostay.consulting> >> --- >> .../devicetree/bindings/power/bq27425.txt | 25 ++++++++++++++++++++++ >> 1 file changed, 25 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/power/bq27425.txt >> >> diff --git a/Documentation/devicetree/bindings/power/bq27425.txt b/Documentation/devicetree/bindings/power/bq27425.txt >> new file mode 100644 >> index 000000000000..f09f787a9378 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/power/bq27425.txt >> @@ -0,0 +1,25 @@ >> +* TI BQ27425 Fuel Gauge >> + >> +http://www.ti.com/lit/ds/symlink/bq27425-g2a.pdf >> + >> +Please note that if any of the optional properties are defined >> +then all settings must be. >> + >> +Required properties: >> +- compatible: Should be "ti,bq27425" >> +- reg: integer, i2c of the device > > s/i2c/I2C address/ > >> + >> +Optional properties: >> +- ti,design-capacity: integer of mAh of the battery >> +- ti,design-energy: integer of the mWh of the battery >> +- ti,terminate-voltage: integer of mV of the dead voltage of >> + the battery > > These all need unit suffixes. mAh and mWh may need to be added to > property-units.txt. Ok makes sense. > >> + >> +bq27425 { >> + compatible = "ti,bq27425"; >> + reg = <0x55>; >> + >> + ti,design-capacity = <1360>; >> + ti,design-energy = <4970>; >> + ti,terminate-voltage = <3200>; >> +}; >> -- >> 2.7.4 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe devicetree" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
