Poslab Savageboard is the i.MX6 SoC base, but BSP code from the vendor is not mainline u-boot and kernel. Personal reason of using this board is testing etnaviv user-space driver, so I re-write device tree files based on mainline kernel for the first step. This patchset includes common DT file, dual and quad board files. Supported components are - Display: HDMI and LVDS panel - eMMC and SD card - Ethernet - Pinmux configuration - SATA: only for Savageboard quad - UART1 for debug console - USB host Missing features are - Audio (WM8903) - USB OTG - PMIC WM8326: default settings are used so no issue to bring-up the system - MIPI DSI and CSI Patches are tested on the Savageboard quad but the dual version should work because the only difference between dual and quad is SATA support. More information in http://www.savageboard.org v4: Fix the license text and add the vendor prefix. Use generic node name for the backlight panel. Sort alphabetically for the pinctrl nodes. Remove unnecessary pinmux of HDMI CEC. v3: Specify the dtbs for i.MX6 build. v2: Fix DT node for regulator, phy-reset-gpios and iomuxc node. Milo Kim (3): ARM: dts: imx6: Add Savageboard common file ARM: dts: imx6: Support Savageboard dual ARM: dts: imx6: Support Savageboard quad .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6dl-savageboard.dts | 51 +++++ arch/arm/boot/dts/imx6q-savageboard.dts | 55 +++++ arch/arm/boot/dts/imx6qdl-savageboard.dtsi | 255 +++++++++++++++++++++ 5 files changed, 364 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-savageboard.dts create mode 100644 arch/arm/boot/dts/imx6q-savageboard.dts create mode 100644 arch/arm/boot/dts/imx6qdl-savageboard.dtsi -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
