On Sun, Dec 25, 2016 at 09:44:41PM -0800, Matt Ranostay wrote: > Signed-off-by: Matt Ranostay <matt@ranostay.consulting> > --- > .../devicetree/bindings/power/bq27425.txt | 25 ++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/bq27425.txt > > diff --git a/Documentation/devicetree/bindings/power/bq27425.txt b/Documentation/devicetree/bindings/power/bq27425.txt > new file mode 100644 > index 000000000000..f09f787a9378 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/bq27425.txt > @@ -0,0 +1,25 @@ > +* TI BQ27425 Fuel Gauge > + > +http://www.ti.com/lit/ds/symlink/bq27425-g2a.pdf > + > +Please note that if any of the optional properties are defined > +then all settings must be. > + > +Required properties: > +- compatible: Should be "ti,bq27425" > +- reg: integer, i2c of the device s/i2c/I2C address/ > + > +Optional properties: > +- ti,design-capacity: integer of mAh of the battery > +- ti,design-energy: integer of the mWh of the battery > +- ti,terminate-voltage: integer of mV of the dead voltage of > + the battery These all need unit suffixes. mAh and mWh may need to be added to property-units.txt. > + > +bq27425 { > + compatible = "ti,bq27425"; > + reg = <0x55>; > + > + ti,design-capacity = <1360>; > + ti,design-energy = <4970>; > + ti,terminate-voltage = <3200>; > +}; > -- > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
