Remove 'fixed-link' nodes from DSA ports since they are not needed (they are not limiting link's speed and the ports will be configured to their maximux speed as a default) Suggested-by: Andrew Lunn <andrew@xxxxxxx> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> --- Changes since v3: - None arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index c0fc3f2..646c90c 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -97,10 +97,6 @@ phy-mode = "rgmii-txid"; link = <&switch1port6 &switch2port9>; - fixed-link { - speed = <1000>; - full-duplex; - }; }; port@6 { @@ -165,10 +161,6 @@ label = "dsa"; phy-mode = "rgmii-txid"; link = <&switch0port5>; - fixed-link { - speed = <1000>; - full-duplex; - }; }; }; mdio { -- 2.5.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html