Remove pwm0grp since it is:
a) Not referenced anywhere in the DTS file (unlike Tower board it
is based on, this board does not use/expose FTM0)
b) Configures PTB2 and PTB3 in a way that contradicts
pinctrl-mdio-mux
Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
---
Changes since v3:
- None
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index fa19cfd..2210811 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -677,15 +677,6 @@
>;
};
- pinctrl_pwm0: pwm0grp {
- fsl,pins = <
- VF610_PAD_PTB0__FTM0_CH0 0x1582
- VF610_PAD_PTB1__FTM0_CH1 0x1582
- VF610_PAD_PTB2__FTM0_CH2 0x1582
- VF610_PAD_PTB3__FTM0_CH3 0x1582
- >;
- };
-
pinctrl_qspi0: qspi0grp {
fsl,pins = <
VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
