I'll give this a quick once over, but Jingoo will also need to review.
On Thu, 10 Nov 2016, Olimpiu Dejeu wrote:
> Resubmition of arcxcnn backlight driver addressing the naming convention
> concerns raised by Rob H.
This is not a commit log. It's a changelog which lives at <####>.
> Signed-off-by: Olimpiu Dejeu <olimpiu@xxxxxxxxxxxxxx>
>
> ---
<####>
> drivers/video/backlight/Kconfig | 7 +
> drivers/video/backlight/Makefile | 1 +
> drivers/video/backlight/arcxcnn_bl.c | 541 +++++++++++++++++++++++++++++++++++
> include/linux/i2c/arcxcnn.h | 67 +++++
> 4 files changed, 616 insertions(+)
> create mode 100644 drivers/video/backlight/arcxcnn_bl.c
> create mode 100644 include/linux/i2c/arcxcnn.h
>
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 5ffa4b4..4e1d2ad 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -460,6 +460,13 @@ config BACKLIGHT_BD6107
> help
> If you have a Rohm BD6107 say Y to enable the backlight driver.
>
> +config BACKLIGHT_ARCXCNN
> + tristate "Backlight driver for the Arctic Sands ARCxCnnnn family"
> + depends on I2C
> + help
> + If you have an ARCxCnnnn family backlight say Y to enable
> + the backlight driver.
> +
> endif # BACKLIGHT_CLASS_DEVICE
>
> endif # BACKLIGHT_LCD_SUPPORT
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index 16ec534..8905129 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -55,3 +55,4 @@ obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o
> obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
> obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
> obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
> +obj-$(CONFIG_BACKLIGHT_ARCXCNN) += arcxcnn_bl.o
> diff --git a/drivers/video/backlight/arcxcnn_bl.c b/drivers/video/backlight/arcxcnn_bl.c
> new file mode 100644
> index 0000000..1dad680
> --- /dev/null
> +++ b/drivers/video/backlight/arcxcnn_bl.c
> @@ -0,0 +1,541 @@
> +/*
> + * Backlight driver for ArcticSand ARC_X_C_0N_0N Devices
> + *
> + * Copyright 2016 ArcticSand, Inc.
> + *
> + * Licensed under the GPL-2 or later.
As far as I'm aware, this does not constitude as a proper GPL licence
statement.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/backlight.h>
> +#include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/pwm.h>
> +#include <linux/regulator/consumer.h>
Alphabetical.
> +#include "linux/i2c/arcxcnn.h"
> +
> +#define ARCXCNN_CMD (0x00) /* Command Register */
> +#define ARCXCNN_CMD_STDBY (0x80) /* I2C Standby */
> +#define ARCXCNN_CMD_RESET (0x40) /* Reset */
> +#define ARCXCNN_CMD_BOOST (0x10) /* Boost */
> +#define ARCXCNN_CMD_OVP_MASK (0x0C) /* --- Over Voltage Threshold */
> +#define ARCXCNN_CMD_OVP_XXV (0x0C) /* <rsvrd> Over Voltage Threshold */
> +#define ARCXCNN_CMD_OVP_20V (0x08) /* 20v Over Voltage Threshold */
> +#define ARCXCNN_CMD_OVP_24V (0x04) /* 24v Over Voltage Threshold */
> +#define ARCXCNN_CMD_OVP_31V (0x00) /* 31.4v Over Voltage Threshold */
> +#define ARCXCNN_CMD_EXT_COMP (0x01) /* part (0) or full (1) external comp */
> +
> +#define ARCXCNN_CONFIG (0x01) /* Configuration */
> +#define ARCXCNN_STATUS1 (0x02) /* Status 1 */
> +#define ARCXCNN_STATUS2 (0x03) /* Status 2 */
> +#define ARCXCNN_FADECTRL (0x04) /* Fading Control */
> +#define ARCXCNN_ILED_CONFIG (0x05) /* ILED Configuration */
> +
> +#define ARCXCNN_LEDEN (0x06) /* LED Enable Register */
> +#define ARCXCNN_LEDEN_ISETEXT (0x80) /* Full-scale current set externally */
> +#define ARCXCNN_LEDEN_MASK (0x3F) /* LED string enables */
> +#define ARCXCNN_LEDEN_LED1 (0x01)
> +#define ARCXCNN_LEDEN_LED2 (0x02)
> +#define ARCXCNN_LEDEN_LED3 (0x04)
> +#define ARCXCNN_LEDEN_LED4 (0x08)
> +#define ARCXCNN_LEDEN_LED5 (0x10)
> +#define ARCXCNN_LEDEN_LED6 (0x20)
> +
> +#define ARCXCNN_WLED_ISET_LSB (0x07) /* LED ISET LSB (in upper nibble) */
> +#define ARCXCNN_WLED_ISET_MSB (0x08) /* LED ISET MSB (8 bits) */
> +
> +#define ARCXCNN_DIMFREQ (0x09)
> +#define ARCXCNN_COMP_CONFIG (0x0A)
> +#define ARCXCNN_FILT_CONFIG (0x0B)
> +#define ARCXCNN_IMAXTUNE (0x0C)
No need for simple defines to be place inside parenthesis.
> +#define DEFAULT_BL_NAME "arctic_bl"
Don't do this. Just use the name in the place you need to use it.
> +#define MAX_BRIGHTNESS 4095
> +
> +static int s_no_reset_on_remove;
> +module_param_named(noreset, s_no_reset_on_remove, int, 0644);
> +MODULE_PARM_DESC(noreset, "No reset on module removal");
> +
> +static int s_ibright = 60;
> +module_param_named(ibright, s_ibright, int, 0644);
> +MODULE_PARM_DESC(ibright, "Initial brightness (when no plat data)");
> +
> +static int s_iledstr = 0x3F;
> +module_param_named(iledstr, s_iledstr, int, 0644);
> +MODULE_PARM_DESC(iledstr, "Initial LED String (when no plat data)");
> +
> +static int s_retries = 2; /* 1 == only one try */
> +module_param_named(retries, s_retries, int, 0644);
> +MODULE_PARM_DESC(retries, "I2C retries attempted");
> +
> +enum arcxcnn_brightness_ctrl_mode {
> + PWM_BASED = 1,
> + REGISTER_BASED,
> +};
> +
> +struct arcxcnn;
Why?
> +struct arcxcnn {
> + char chipname[64];
> + enum arcxcnn_chip_id chip_id;
> + enum arcxcnn_brightness_ctrl_mode mode;
> + struct i2c_client *client;
> + struct backlight_device *bl;
> + struct device *dev;
You only need one of 'bl', 'dev' and 'client'.
> + struct arcxcnn_platform_data *pdata;
pdata should not be stored in ddata.
> + struct pwm_device *pwm;
> + struct regulator *supply; /* regulator for VDD input */
> +};
Document using kerneldoc.
> +static int arcxcnn_write_byte(struct arcxcnn *lp, u8 reg, u8 data)
> +{
> + s32 ret = -1;
> + int att;
> +
> + for (att = 0; att < s_retries; att++) {
This is non-standard.
Why would it fail on first attempt and succeed on the next?
> + ret = i2c_smbus_write_byte_data(lp->client, reg, data);
> + if (ret >= 0)
> + return 0;
> + }
> + return ret;
> +}
> +
> +static u8 arcxcnn_read_byte(struct arcxcnn *lp, u8 reg)
> +{
> + int val;
> + int att;
> +
> + for (att = 0; att < s_retries; att++) {
> + val = i2c_smbus_read_byte_data(lp->client, reg);
> + if (val >= 0)
> + return (u8)val;
> + }
> + return 0;
> +}
> +
> +static int arcxcnn_update_bit(struct arcxcnn *lp, u8 reg, u8 mask, u8 data)
> +{
> + int ret, att;
> + u8 tmp;
> +
> + for (att = 0, ret = -1; att < s_retries; att++) {
> + ret = i2c_smbus_read_byte_data(lp->client, reg);
> + if (ret >= 0)
> + break;
> + }
> + if (ret < 0) {
> + dev_err(lp->dev, "failed to read 0x%.2x\n", reg);
> + return ret;
> + }
> +
> + tmp = (u8)ret;
> + tmp &= ~mask;
> + tmp |= data & mask;
> +
> + return arcxcnn_write_byte(lp, reg, tmp);
> +}
I'd really rather you didn't role your own read/write/update API!
> +static int arcxcnn_set_brightness(struct arcxcnn *lp, u32 brightness)
> +{
> + int ret;
> + u8 val;
> +
> + val = (brightness & 0xF) << 4;
Define the shift value.
> + ret = arcxcnn_write_byte(lp, ARCXCNN_WLED_ISET_LSB, val);
> + if (ret < 0)
> + return ret;
> + val = (brightness >> 4);
> + ret = arcxcnn_write_byte(lp, ARCXCNN_WLED_ISET_MSB, val);
'\n' here.
> + return ret;
> +}
> +
> +static int arcxcnn_bl_update_status(struct backlight_device *bl)
> +{
> + struct arcxcnn *lp = bl_get_data(bl);
> + u32 brightness = bl->props.brightness;
> +
> + if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
> + brightness = 0;
> +
> + /* set brightness */
> + if (lp->mode == PWM_BASED)
> + ; /* via pwm */
Replace this with a comment.
> + else if (lp->mode == REGISTER_BASED)
> + arcxcnn_set_brightness(lp, brightness);
> +
> + /* set power-on/off/save modes */
> + if (bl->props.power == 0)
> + /* take out of standby */
> + arcxcnn_update_bit(lp, ARCXCNN_CMD, ARCXCNN_CMD_STDBY, 0);
> + else
> + /* 1-3 == power save, 4 = off
> + * place in low-power standby mode
> + */
This is not a valid multi-line kernel comment.
See: Documentation/CodingStyle
> + arcxcnn_update_bit(lp, ARCXCNN_CMD,
> + ARCXCNN_CMD_STDBY, ARCXCNN_CMD_STDBY);
> + return 0;
> +}
> +
> +static const struct backlight_ops arcxcnn_bl_ops = {
> + .options = BL_CORE_SUSPENDRESUME,
> + .update_status = arcxcnn_bl_update_status,
> +};
> +
> +static int arcxcnn_backlight_register(struct arcxcnn *lp)
> +{
> + struct backlight_device *bl;
This variable seems pretty redundant.
> + struct backlight_properties props;
Dynamically request memory for this.
> + struct arcxcnn_platform_data *pdata = lp->pdata;
> + const char *name = pdata->name ? : DEFAULT_BL_NAME;
Why do you need to set a name different from the device name?
> + memset(&props, 0, sizeof(props));
> + props.type = BACKLIGHT_PLATFORM;
> + props.max_brightness = MAX_BRIGHTNESS;
> +
> + if (pdata->initial_brightness > props.max_brightness)
> + pdata->initial_brightness = props.max_brightness;
> +
> + props.brightness = pdata->initial_brightness;
> +
> + bl = devm_backlight_device_register(lp->dev, name, lp->dev, lp,
> + &arcxcnn_bl_ops, &props);
> + if (IS_ERR(bl))
> + return PTR_ERR(bl);
> +
> + lp->bl = bl;
> +
> + return 0;
> +}
> +
> +static ssize_t arcxcnn_get_chip_id(struct device *dev,
This should be arcxcnn_chip_id_show()
> + struct device_attribute *attr, char *buf)
> +{
> + struct arcxcnn *lp = dev_get_drvdata(dev);
> +
> + return scnprintf(buf, PAGE_SIZE, "%s\n", lp->chipname);
> +}
> +
> +static ssize_t arcxcnn_get_led_str(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct arcxcnn *lp = dev_get_drvdata(dev);
> +
> + return scnprintf(buf, PAGE_SIZE, "%02X\n", lp->pdata->led_str);
This is not pdata.
What is led_str anyway? It looks like an int, not a string.
> +}
> +
> +static ssize_t arcxcnn_set_led_str(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t len)
> +{
arcxcnn_led_str_store()
> + struct arcxcnn *lp = dev_get_drvdata(dev);
> + unsigned long ledstr;
> +
> + if (kstrtoul(buf, 0, &ledstr))
> + return 0;
> +
> + if (ledstr != lp->pdata->led_str) {
> + /* don't allow 0 for ledstr, use power to turn all off */
> + if (ledstr == 0)
> + return 0;
Shouldn't you be return -EINVAL if 0 is not valid?
> + lp->pdata->led_str = ledstr & 0x3F;
> + arcxcnn_update_bit(lp, ARCXCNN_LEDEN,
> + ARCXCNN_LEDEN_MASK, lp->pdata->led_str);
What are you lining up against here?
> + }
'\n'
> + return len;
> +}
> +
> +static ssize_t arcxcnn_get_bl_ctl_mode(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
arcxcnn_bl_ctl_mode_show()
> + struct arcxcnn *lp = dev_get_drvdata(dev);
> + char *strmode = NULL;
Why are you pre-initialising here?
> + if (lp->mode == PWM_BASED)
> + strmode = "pwm based";
> + else if (lp->mode == REGISTER_BASED)
> + strmode = "register based";
Remove "based" and place it in scnprintf instead.
> + return scnprintf(buf, PAGE_SIZE, "%s\n", strmode);
> +}
> +
> +static DEVICE_ATTR(chip_id, 0444, arcxcnn_get_chip_id, NULL);
> +static DEVICE_ATTR(led_str, 0664, arcxcnn_get_led_str, arcxcnn_set_led_str);
> +static DEVICE_ATTR(bl_ctl_mode, 0444, arcxcnn_get_bl_ctl_mode, NULL);
> +
> +static struct attribute *arcxcnn_attributes[] = {
> + &dev_attr_chip_id.attr,
> + &dev_attr_led_str.attr,
> + &dev_attr_bl_ctl_mode.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group arcxcnn_attr_group = {
> + .attrs = arcxcnn_attributes,
> +};
> +
> +#ifdef CONFIG_OF
No ifdefery please.
Use if (IS_ENABLED(CONFIG_OF)) before calling arcxcnn_parse_dt()
instead.
> +static int arcxcnn_parse_dt(struct arcxcnn *lp)
> +{
> + struct device *dev = lp->dev;
> + struct device_node *node = dev->of_node;
> + u32 prog_val, num_entry, sources[6];
> + int ret;
> +
> + if (!node) {
> + dev_err(dev, "no platform data.\n");
That's not what this means is it?
> + return -EINVAL;
> + }
'\n'
> + lp->pdata->led_config_0_set = false;
> + lp->pdata->led_config_1_set = false;
> + lp->pdata->dim_freq_set = false;
> + lp->pdata->comp_config_set = false;
> + lp->pdata->filter_config_set = false;
> + lp->pdata->trim_config_set = false;
These are already 0.
And you need to take these 'out' of pdata.
Create a config struct to place them all in and add it to ddata.
> + ret = of_property_read_string(node, "label", &lp->pdata->name);
> + if (ret < 0)
> + lp->pdata->name = NULL;
> +
> + ret = of_property_read_u32(node, "default-brightness", &prog_val);
> + if (ret < 0)
> + prog_val = s_ibright;
> + lp->pdata->initial_brightness = prog_val;
> + if (lp->pdata->initial_brightness > MAX_BRIGHTNESS)
> + lp->pdata->initial_brightness = MAX_BRIGHTNESS;
> +
> + ret = of_property_read_u32(node, "arc,led-config-0", &prog_val);
> + if (ret == 0) {
> + lp->pdata->led_config_0 = (u8)prog_val;
> + lp->pdata->led_config_0_set = true;
> + }
> + ret = of_property_read_u32(node, "arc,led-config-1", &prog_val);
> + if (ret == 0) {
> + lp->pdata->led_config_1 = (u8)prog_val;
> + lp->pdata->led_config_1_set = true;
> + }
> + ret = of_property_read_u32(node, "arc,dim-freq", &prog_val);
> + if (ret == 0) {
> + lp->pdata->dim_freq = (u8)prog_val;
> + lp->pdata->dim_freq_set = true;
> + }
> + ret = of_property_read_u32(node, "arc,comp-config", &prog_val);
> + if (ret == 0) {
> + lp->pdata->comp_config = (u8)prog_val;
> + lp->pdata->comp_config_set = true;
> + }
> + ret = of_property_read_u32(node, "arc,filter-config", &prog_val);
> + if (ret == 0) {
> + lp->pdata->filter_config = (u8)prog_val;
> + lp->pdata->filter_config_set = true;
> + }
> + ret = of_property_read_u32(node, "arc,trim-config", &prog_val);
> + if (ret == 0) {
> + lp->pdata->trim_config = (u8)prog_val;
> + lp->pdata->trim_config_set = true;
> + }
You need to get these signed off by the DT folk.
> + ret = of_property_count_u32_elems(node, "led-sources");
> + if (ret < 0)
> + lp->pdata->led_str = 0x3F;
What is 3F? Please define it.
> + else {
> + num_entry = ret;
> + if (num_entry > 6)
> + num_entry = 6;
What is 6? No magic numbers.
> + ret = of_property_read_u32_array(node, "led-sources", sources,
> + num_entry);
> + if (ret < 0) {
> + dev_err(dev, "led-sources node is invalid.\n");
> + return -EINVAL;
> + }
> +
> + lp->pdata->led_str = 0;
> + while (num_entry > 0)
> + lp->pdata->led_str |= (1 << sources[--num_entry]);
This is not good code. Please make it easier to read.
> + }
> + return 0;
> +}
> +#else
> +static int arcxcnn_parse_dt(struct arcxcnn *lp)
> +{
> + return -EINVAL;
> +}
> +#endif
> +
> +static int arcxcnn_probe(struct i2c_client *cl, const struct i2c_device_id *id)
> +{
> + struct arcxcnn *lp;
> + int ret;
> + u8 regval;
> + u16 chipid;
> +
> + if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
> + return -EIO;
> +
> + lp = devm_kzalloc(&cl->dev, sizeof(*lp), GFP_KERNEL);
> + if (!lp)
> + return -ENOMEM;
> +
> + lp->client = cl;
> + lp->dev = &cl->dev;
You don't need both of these.
> + lp->chip_id = id->driver_data;
What are you going to use this for?
> + lp->pdata = dev_get_platdata(&cl->dev);
> +
> + if (!lp->pdata) {
> + lp->pdata = devm_kzalloc(lp->dev,
> + sizeof(*lp->pdata), GFP_KERNEL);
> + if (!lp->pdata)
> + return -ENOMEM;
> +
> + /* no platform data, parse the device-tree for info. if there
> + * is no device tree entry, we are being told we exist because
> + * user-land said so, so make up the info we need
> + */
Not a valid multi-line comment.
> + ret = arcxcnn_parse_dt(lp);
> + if (ret < 0) {
> + /* no device tree, use defaults based on module params
> + */
Not a valid single-line comment.
> + lp->pdata->led_config_0_set = false;
> + lp->pdata->led_config_1_set = false;
> + lp->pdata->dim_freq_set = false;
> + lp->pdata->comp_config_set = false;
> + lp->pdata->filter_config_set = false;
> + lp->pdata->trim_config_set = false;
> + lp->pdata->name = NULL;
These are already 0.
> + lp->pdata->initial_brightness = s_ibright;
> + lp->pdata->led_str = s_iledstr;
> + }
> + }
> +
> + if (lp->pdata->dim_freq_set)
> + lp->mode = PWM_BASED;
> + else
> + lp->mode = REGISTER_BASED;
> +
> + i2c_set_clientdata(cl, lp);
> +
> + /* read device ID */
> + regval = arcxcnn_read_byte(lp, 0x1E);
> + chipid = regval;
> + chipid <<= 8;
> + regval = arcxcnn_read_byte(lp, 0x1F);
> + chipid |= regval;
Define all magic numbers.
> + /* make sure it belongs to this driver
> + * TODO - handle specific ids
> + */
> + if (chipid != 0x02A5) {
> + #if 1
What on earth is this?
> + dev_info(&cl->dev, "Chip Id is %04X\n", chipid);
> + #else
> + dev_err(&cl->dev, "%04X is not ARC2C\n", chipid);
> + return -ENODEV;
> + #endif
> + }
> + /* reset the device */
> + arcxcnn_write_byte(lp, ARCXCNN_CMD, ARCXCNN_CMD_RESET);
> +
> + /* set initial brightness */
> + arcxcnn_set_brightness(lp, lp->pdata->initial_brightness);
> +
> + /* if fadectrl set in DT, set the value directly, else leave default */
> + if (lp->pdata->led_config_0_set)
> + arcxcnn_write_byte(lp, ARCXCNN_FADECTRL,
> + lp->pdata->led_config_0);
> +
> + /* if iled config set in DT, set the value, else internal mode */
Spelling.
> + if (lp->pdata->led_config_1_set)
> + arcxcnn_write_byte(lp, ARCXCNN_ILED_CONFIG,
> + lp->pdata->led_config_1);
> + else
> + arcxcnn_write_byte(lp, ARCXCNN_ILED_CONFIG, 0x57);
More magic numbers.
> + /* other misc DT settings */
> + if (lp->pdata->dim_freq_set)
> + arcxcnn_write_byte(lp, ARCXCNN_FADECTRL, lp->pdata->dim_freq);
> + if (lp->pdata->comp_config_set)
> + arcxcnn_write_byte(lp, ARCXCNN_COMP_CONFIG,
> + lp->pdata->comp_config);
> + if (lp->pdata->filter_config_set)
> + arcxcnn_write_byte(lp, ARCXCNN_FILT_CONFIG,
> + lp->pdata->filter_config);
> + if (lp->pdata->trim_config_set)
> + arcxcnn_write_byte(lp, ARCXCNN_IMAXTUNE,
> + lp->pdata->trim_config);
What are the default values of these registers?
If 0, then just write them without the checks.
> + /* set initial LED Strings */
What is LED strings?
> + arcxcnn_update_bit(lp, ARCXCNN_LEDEN,
> + ARCXCNN_LEDEN_MASK, lp->pdata->led_str);
> +
> + snprintf(lp->chipname, sizeof(lp->chipname),
> + "%s-%04X", id->name, chipid);
> +
> + ret = arcxcnn_backlight_register(lp);
> + if (ret) {
> + dev_err(lp->dev,
> + "failed to register backlight. err: %d\n", ret);
> + return ret;
> + }
> +
> + ret = sysfs_create_group(&lp->dev->kobj, &arcxcnn_attr_group);
> + if (ret) {
> + dev_err(lp->dev, "failed to register sysfs. err: %d\n", ret);
> + return ret;
> + }
> +
> + backlight_update_status(lp->bl);
'\n'
> + return 0;
> +}
> +
> +static int arcxcnn_remove(struct i2c_client *cl)
> +{
> + struct arcxcnn *lp = i2c_get_clientdata(cl);
> +
> + if (!s_no_reset_on_remove) {
> + /* disable all strings */
> + arcxcnn_write_byte(lp, ARCXCNN_LEDEN, 0x00);
> + /* reset the device */
> + arcxcnn_write_byte(lp, ARCXCNN_CMD, ARCXCNN_CMD_RESET);
> + }
'\n'
> + lp->bl->props.brightness = 0;
'\n'
> + backlight_update_status(lp->bl);
'\n'
> + if (lp->supply)
> + regulator_disable(lp->supply);
'\n'
> + sysfs_remove_group(&lp->dev->kobj, &arcxcnn_attr_group);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id arcxcnn_dt_ids[] = {
> + { .compatible = "arc,arc2c0608" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, arcxcnn_dt_ids);
> +
> +/* Note that the device/chip ID is not fixed in silicon so
> + * auto-probing of these devices on the bus is most likely
> + * not possible, use device tree to set i2c bus address
Then why supply it here at all?
> + */
> +static const struct i2c_device_id arcxcnn_ids[] = {
> + {"arc2c0608", ARC2C0608},
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, arcxcnn_ids);
> +
> +static struct i2c_driver arcxcnn_driver = {
> + .driver = {
> + .name = "arcxcnn_bl",
> + .of_match_table = of_match_ptr(arcxcnn_dt_ids),
> + },
Tabbing.
> + .probe = arcxcnn_probe,
> + .remove = arcxcnn_remove,
> + .id_table = arcxcnn_ids,
> +};
> +
Superfluous '\n'
> +module_i2c_driver(arcxcnn_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Brian Dodge <bdodge09@xxxxxxxxxxx>");
Who?
> +MODULE_DESCRIPTION("ARCXCNN Backlight driver");
> diff --git a/include/linux/i2c/arcxcnn.h b/include/linux/i2c/arcxcnn.h
> new file mode 100644
> index 0000000..1c681dd
> --- /dev/null
> +++ b/include/linux/i2c/arcxcnn.h
> @@ -0,0 +1,67 @@
> +/*
> + * Backlight driver for ArcticSand ARC2C0608 Backlight Devices
> + *
> + * Copyright 2016 ArcticSand, Inc.
> + *
> + * Licensed under the GPL-2 or later.
> + */
> +
> +#ifndef _ARCXCNN_H
> +#define _ARCXCNN_H
> +
> +enum arcxcnn_chip_id {
> + ARC2C0608
> +};
> +
> +enum arcxcnn_brightness_source {
> + ARCXCNN_PWM_ONLY,
> + ARCXCNN_I2C_ONLY = 2,
> +};
> +
> +#define ARCXCNN_MAX_PROGENTRIES 48 /* max a/v pairs for custom */
> +
> +/**
> + * struct arcxcnn_platform_data
> + * @name : Backlight driver name. If it is not defined, default name is set.
> + * @initial_brightness : initial value of backlight brightness
> + * @led_str : initial LED string enables, upper bit is global on/off
> + * @led_config_0 : fading speed (period between intensity steps)
> + * @led_config_1 : misc settings, see datasheet
> + * @dim_freq : pwm dimming frequency if in pwm mode
> + * @comp_config : misc config, see datasheet
> + * @filter_config: RC/PWM filter config, see datasheet
> + * @trim_config : full scale current trim, see datasheet
> + * @led_config_0_set : the value in led_config_0 is valid
> + * @led_config_1_set : the value in led_config_1 is valid
> + * @dim_freq_set : the value in dim_freq is valid
> + * @comp_config_set : the value in comp_config is valid
> + * @filter_config_set : the value in filter_config is valid
> + * @trim_config_set : the value in trim_config is valid
Tab out the ':'s.
This is only platform data if it's set by the platform.
Otherwise it's just a config or bitfields.
> + * the _set flags are used to indicate that the value was explicitly set
> + * in the device tree or platform data. settings not set are left as default
> + * power-on default values of the chip except for led_str and led_config_1
> + * which are set by the driver (led_str is specified indirectly in the
> + * device tree via "led-sources")
> + */
> +struct arcxcnn_platform_data {
> + const char *name;
> + u16 initial_brightness;
> + u8 led_str;
> +
> + u8 led_config_0;
> + u8 led_config_1;
> + u8 dim_freq;
> + u8 comp_config;
> + u8 filter_config;
> + u8 trim_config;
> +
> + bool led_config_0_set;
> + bool led_config_1_set;
> + bool dim_freq_set;
> + bool comp_config_set;
> + bool filter_config_set;
> + bool trim_config_set;
> +};
> +
> +#endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
