Hi! After finally having all essintial drivers upstreamed (the last ones are currently in -next) I would like to have the dts and the defconfig also upstreamed. checkpatch complains about missing docs for some compatible strings: axentia,tse850v3 (v3 is the hw version that we currently use) axentia,tse850 (in case we have future versions with commonality) axentia,linea (the cpu module, reused in other products as well) nxp,se97b (temp sensor in the below eeprom module) nxp,24c02 (eeprom on the main board) st,24c64 (eeprom on the cpu module) I don't know where I should document those, or if it's even needed? I get the feeling that the last three are not "my fault". Anyway, please advice. Or, even better, apply as-is... :-) Cheers, Peter Peter Rosin (2): ARM: dts: add devicetree for the Axentia TSE-850 ARM: tse850_defconfig: add Axentia TSE-850 MAINTAINERS | 7 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/axentia-linea.dtsi | 52 +++++++ arch/arm/boot/dts/axentia-tse850-3.dts | 275 +++++++++++++++++++++++++++++++++ arch/arm/configs/tse850_defconfig | 223 ++++++++++++++++++++++++++ 5 files changed, 558 insertions(+) create mode 100644 arch/arm/boot/dts/axentia-linea.dtsi create mode 100644 arch/arm/boot/dts/axentia-tse850-3.dts create mode 100644 arch/arm/configs/tse850_defconfig -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
