On Tue 08 Nov 08:29 PST 2016, Srinivas Kandagatla wrote: > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > --- > arch/arm/boot/dts/qcom-apq8064.dtsi | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi > index 1dbe697..fde006c 100644 > --- a/arch/arm/boot/dts/qcom-apq8064.dtsi > +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi > @@ -627,6 +627,34 @@ > clock-names = "core"; > }; > > + qcom,ssbi@c00000 { No "qcom," in the node name. > + compatible = "qcom,ssbi"; > + reg = <0x00c00000 0x1000>; > + qcom,controller-type = "pmic-arbiter"; > + > + pmicintc2: pmic@1 { I think we should follow Linus' lead and label this "pm8821". > + compatible = "qcom,pm8821"; > + interrupt-parent = <&tlmm_pinmux>; > + interrupts = <76 8>; Please spell out IRQ_TYPE_LEVEL_LOW. And interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW> combines the two lines nicely. > + #interrupt-cells = <2>; > + interrupt-controller; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pm8821_mpps: mpps@50 { > + Extra newline. > + compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; > + reg = <0x50>; > + > + interrupts = <24 1>, <25 1>, <26 1>, > + <27 1>; I think these should be IRQ_TYPE_NONE per the discussion on how to share interrupts between the gpio/mpp driver and other clients. On the other hand, per the pm8821 driver we only support LEVEL_LOW (high?). > + > + gpio-controller; > + #gpio-cells = <2>; > + }; > + }; > + }; > + Regards, Bjorn -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html