Thanks Bjorn for review comments.
On 08/11/16 19:13, Bjorn Andersson wrote:
On Tue 08 Nov 08:29 PST 2016, Srinivas Kandagatla wrote:
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1dbe697..fde006c 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -627,6 +627,34 @@
clock-names = "core";
};
+ qcom,ssbi@c00000 {
No "qcom," in the node name.
Will fix it in next version, I agree with rest of the comments too.
All of them will be fixed in next version.
+ compatible = "qcom,ssbi";
+ reg = <0x00c00000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+
+ pmicintc2: pmic@1 {
I think we should follow Linus' lead and label this "pm8821".
+ compatible = "qcom,pm8821";
+ interrupt-parent = <&tlmm_pinmux>;
+ interrupts = <76 8>;
Please spell out IRQ_TYPE_LEVEL_LOW.
And interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW> combines
the two lines nicely.
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8821_mpps: mpps@50 {
+
Extra newline.
+ compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+ reg = <0x50>;
+
+ interrupts = <24 1>, <25 1>, <26 1>,
+ <27 1>;
I think these should be IRQ_TYPE_NONE per the discussion on how to share
interrupts between the gpio/mpp driver and other clients.
On the other hand, per the pm8821 driver we only support LEVEL_LOW
(high?).
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
