The rk3399 SoC USB2 PHY is comprised of one Host port and
one OTG port. And OTG port is for USB2.0 part of USB3.0 OTG
controller, as a part to construct a fully feature Type-C
subsystem.
With this patch, we can support OTG port with the following
functions:
- Support BC1.2 charger detect, and use extcon notifier to
send USB charger types to power driver.
- Support PHY suspend for power management.
- Support OTG Host only mode.
Signed-off-by: William Wu <wulf@xxxxxxxxxxxxxx>
---
Changes in v3:
- split the clock fix into a separate patch
Changes in v2:
- remove wakelock
drivers/phy/phy-rockchip-inno-usb2.c | 591 +++++++++++++++++++++++++++++++++--
1 file changed, 561 insertions(+), 30 deletions(-)
diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
index ac20310..ecfd7d1 100644
--- a/drivers/phy/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/phy-rockchip-inno-usb2.c
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
+#include <linux/extcon.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/gpio/consumer.h>
@@ -30,11 +31,15 @@
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/power_supply.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
#define BIT_WRITEABLE_SHIFT 16
-#define SCHEDULE_DELAY (60 * HZ)
+#define SCHEDULE_DELAY (60 * HZ)
+#define OTG_SCHEDULE_DELAY (2 * HZ)
enum rockchip_usb2phy_port_id {
USB2PHY_PORT_OTG,
@@ -49,6 +54,37 @@ enum rockchip_usb2phy_host_state {
PHY_STATE_FS_LS_ONLINE = 4,
};
+/**
+ * Different states involved in USB charger detection.
+ * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection
+ * process is not yet started.
+ * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact.
+ * USB_CHG_STATE_DCD_DONE Data pin contact is detected.
+ * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects
+ * between SDP and DCP/CDP).
+ * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
+ * between DCP and CDP).
+ * USB_CHG_STATE_DETECTED USB charger type is determined.
+ */
+enum usb_chg_state {
+ USB_CHG_STATE_UNDEFINED = 0,
+ USB_CHG_STATE_WAIT_FOR_DCD,
+ USB_CHG_STATE_DCD_DONE,
+ USB_CHG_STATE_PRIMARY_DONE,
+ USB_CHG_STATE_SECONDARY_DONE,
+ USB_CHG_STATE_DETECTED,
+};
+
+static const unsigned int rockchip_usb2phy_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_CHG_USB_SDP,
+ EXTCON_CHG_USB_CDP,
+ EXTCON_CHG_USB_DCP,
+ EXTCON_CHG_USB_SLOW,
+ EXTCON_NONE,
+};
+
struct usb2phy_reg {
unsigned int offset;
unsigned int bitend;
@@ -58,19 +94,55 @@ struct usb2phy_reg {
};
/**
+ * struct rockchip_chg_det_reg: usb charger detect registers
+ * @cp_det: charging port detected successfully.
+ * @dcp_det: dedicated charging port detected successfully.
+ * @dp_det: assert data pin connect successfully.
+ * @idm_sink_en: open dm sink curren.
+ * @idp_sink_en: open dp sink current.
+ * @idp_src_en: open dm source current.
+ * @rdm_pdwn_en: open dm pull down resistor.
+ * @vdm_src_en: open dm voltage source.
+ * @vdp_src_en: open dp voltage source.
+ * @opmode: utmi operational mode.
+ */
+struct rockchip_chg_det_reg {
+ struct usb2phy_reg cp_det;
+ struct usb2phy_reg dcp_det;
+ struct usb2phy_reg dp_det;
+ struct usb2phy_reg idm_sink_en;
+ struct usb2phy_reg idp_sink_en;
+ struct usb2phy_reg idp_src_en;
+ struct usb2phy_reg rdm_pdwn_en;
+ struct usb2phy_reg vdm_src_en;
+ struct usb2phy_reg vdp_src_en;
+ struct usb2phy_reg opmode;
+};
+
+/**
* struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
* @phy_sus: phy suspend register.
+ * @bvalid_det_en: vbus valid rise detection enable register.
+ * @bvalid_det_st: vbus valid rise detection status register.
+ * @bvalid_det_clr: vbus valid rise detection clear register.
* @ls_det_en: linestate detection enable register.
* @ls_det_st: linestate detection state register.
* @ls_det_clr: linestate detection clear register.
+ * @utmi_avalid: utmi vbus avalid status register.
+ * @utmi_bvalid: utmi vbus bvalid status register.
* @utmi_ls: utmi linestate state register.
* @utmi_hstdet: utmi host disconnect register.
*/
struct rockchip_usb2phy_port_cfg {
struct usb2phy_reg phy_sus;
+ struct usb2phy_reg bvalid_det_en;
+ struct usb2phy_reg bvalid_det_st;
+ struct usb2phy_reg bvalid_det_clr;
struct usb2phy_reg ls_det_en;
struct usb2phy_reg ls_det_st;
struct usb2phy_reg ls_det_clr;
+ struct usb2phy_reg utmi_avalid;
+ struct usb2phy_reg utmi_bvalid;
struct usb2phy_reg utmi_ls;
struct usb2phy_reg utmi_hstdet;
};
@@ -80,31 +152,51 @@ struct rockchip_usb2phy_port_cfg {
* @reg: the address offset of grf for usb-phy config.
* @num_ports: specify how many ports that the phy has.
* @clkout_ctl: keep on/turn off output clk of phy.
+ * @chg_det: charger detection registers.
*/
struct rockchip_usb2phy_cfg {
unsigned int reg;
unsigned int num_ports;
struct usb2phy_reg clkout_ctl;
const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS];
+ const struct rockchip_chg_det_reg chg_det;
};
/**
* struct rockchip_usb2phy_port: usb-phy port data.
* @port_id: flag for otg port or host port.
* @suspended: phy suspended flag.
+ * @utmi_avalid: utmi avalid status usage flag.
+ * true - use avalid to get vbus status
+ * flase - use bvalid to get vbus status
+ * @vbus_attached: otg device vbus status.
+ * @bvalid_irq: IRQ number assigned for vbus valid rise detection.
* @ls_irq: IRQ number assigned for linestate detection.
* @mutex: for register updating in sm_work.
- * @sm_work: OTG state machine work.
+ * @chg_work: charge detect work.
+ * @otg_sm_work: OTG state machine work.
+ * @sm_work: HOST state machine work.
* @phy_cfg: port register configuration, assigned by driver data.
+ * @event_nb: hold event notification callback.
+ * @state: define OTG enumeration states before device reset.
+ * @mode: the dr_mode of the controller.
*/
struct rockchip_usb2phy_port {
struct phy *phy;
unsigned int port_id;
bool suspended;
+ bool utmi_avalid;
+ bool vbus_attached;
+ int bvalid_irq;
int ls_irq;
struct mutex mutex;
+ struct delayed_work chg_work;
+ struct delayed_work otg_sm_work;
struct delayed_work sm_work;
const struct rockchip_usb2phy_port_cfg *port_cfg;
+ struct notifier_block event_nb;
+ enum usb_otg_state state;
+ enum usb_dr_mode mode;
};
/**
@@ -113,6 +205,11 @@ struct rockchip_usb2phy_port {
* @clk: clock struct of phy input clk.
* @clk480m: clock struct of phy output clk.
* @clk_hw: clock struct of phy output clk management.
+ * @chg_state: states involved in USB charger detection.
+ * @chg_type: USB charger types.
+ * @dcd_retries: The retry count used to track Data contact
+ * detection process.
+ * @edev: extcon device for notification registration
* @phy_cfg: phy register configuration, assigned by driver data.
* @ports: phy port instance.
*/
@@ -122,6 +219,10 @@ struct rockchip_usb2phy {
struct clk *clk;
struct clk *clk480m;
struct clk_hw clk480m_hw;
+ enum usb_chg_state chg_state;
+ enum power_supply_type chg_type;
+ u8 dcd_retries;
+ struct extcon_dev *edev;
const struct rockchip_usb2phy_cfg *phy_cfg;
struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS];
};
@@ -263,33 +364,84 @@ rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
return ret;
}
-static int rockchip_usb2phy_init(struct phy *phy)
+static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
{
- struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
- struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
int ret;
+ struct device_node *node = rphy->dev->of_node;
+ struct extcon_dev *edev;
+
+ if (of_property_read_bool(node, "extcon")) {
+ edev = extcon_get_edev_by_phandle(rphy->dev, 0);
+ if (IS_ERR(edev)) {
+ if (PTR_ERR(edev) != -EPROBE_DEFER)
+ dev_err(rphy->dev, "Invalid or missing extcon\n");
+ return PTR_ERR(edev);
+ }
+ } else {
+ /* Initialize extcon device */
+ edev = devm_extcon_dev_allocate(rphy->dev,
+ rockchip_usb2phy_extcon_cable);
- if (rport->port_id == USB2PHY_PORT_HOST) {
- /* clear linestate and enable linestate detect irq */
- mutex_lock(&rport->mutex);
+ if (IS_ERR(edev))
+ return -ENOMEM;
- ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+ ret = devm_extcon_dev_register(rphy->dev, edev);
if (ret) {
- mutex_unlock(&rport->mutex);
+ dev_err(rphy->dev, "failed to register extcon device\n");
return ret;
}
+ }
- ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true);
- if (ret) {
- mutex_unlock(&rport->mutex);
- return ret;
+ rphy->edev = edev;
+
+ return 0;
+}
+
+static int rockchip_usb2phy_init(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+ int ret = 0;
+
+ mutex_lock(&rport->mutex);
+
+ if (rport->port_id == USB2PHY_PORT_OTG) {
+ if (rport->mode != USB_DR_MODE_HOST) {
+ /* clear bvalid status and enable bvalid detect irq */
+ ret = property_enable(rphy,
+ &rport->port_cfg->bvalid_det_clr,
+ true);
+ if (ret)
+ goto out;
+
+ ret = property_enable(rphy,
+ &rport->port_cfg->bvalid_det_en,
+ true);
+ if (ret)
+ goto out;
+
+ schedule_delayed_work(&rport->otg_sm_work,
+ OTG_SCHEDULE_DELAY);
+ } else {
+ /* If OTG works in host only mode, do nothing. */
+ dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode);
}
+ } else if (rport->port_id == USB2PHY_PORT_HOST) {
+ /* clear linestate and enable linestate detect irq */
+ ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+ if (ret)
+ goto out;
+
+ ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true);
+ if (ret)
+ goto out;
- mutex_unlock(&rport->mutex);
schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
}
- return 0;
+out:
+ mutex_unlock(&rport->mutex);
+ return ret;
}
static int rockchip_usb2phy_power_on(struct phy *phy)
@@ -340,7 +492,11 @@ static int rockchip_usb2phy_exit(struct phy *phy)
{
struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
- if (rport->port_id == USB2PHY_PORT_HOST)
+ if (rport->port_id == USB2PHY_PORT_OTG &&
+ rport->mode != USB_DR_MODE_HOST) {
+ cancel_delayed_work_sync(&rport->otg_sm_work);
+ cancel_delayed_work_sync(&rport->chg_work);
+ } else if (rport->port_id == USB2PHY_PORT_HOST)
cancel_delayed_work_sync(&rport->sm_work);
return 0;
@@ -354,6 +510,249 @@ static const struct phy_ops rockchip_usb2phy_ops = {
.owner = THIS_MODULE,
};
+static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(work, struct rockchip_usb2phy_port,
+ otg_sm_work.work);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+ static unsigned int cable;
+ unsigned long delay;
+ bool vbus_attach, sch_work, notify_charger;
+
+ if (rport->utmi_avalid)
+ vbus_attach =
+ property_enabled(rphy, &rport->port_cfg->utmi_avalid);
+ else
+ vbus_attach =
+ property_enabled(rphy, &rport->port_cfg->utmi_bvalid);
+
+ sch_work = false;
+ notify_charger = false;
+ delay = OTG_SCHEDULE_DELAY;
+ dev_dbg(&rport->phy->dev, "%s otg sm work\n",
+ usb_otg_state_string(rport->state));
+
+ switch (rport->state) {
+ case OTG_STATE_UNDEFINED:
+ rport->state = OTG_STATE_B_IDLE;
+ if (!vbus_attach)
+ rockchip_usb2phy_power_off(rport->phy);
+ /* fall through */
+ case OTG_STATE_B_IDLE:
+ if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) > 0) {
+ dev_dbg(&rport->phy->dev, "usb otg host connect\n");
+ rport->state = OTG_STATE_A_HOST;
+ rockchip_usb2phy_power_on(rport->phy);
+ return;
+ } else if (vbus_attach) {
+ dev_dbg(&rport->phy->dev, "vbus_attach\n");
+ switch (rphy->chg_state) {
+ case USB_CHG_STATE_UNDEFINED:
+ schedule_delayed_work(&rport->chg_work, 0);
+ return;
+ case USB_CHG_STATE_DETECTED:
+ switch (rphy->chg_type) {
+ case POWER_SUPPLY_TYPE_USB:
+ dev_dbg(&rport->phy->dev,
+ "sdp cable is connecetd\n");
+ rockchip_usb2phy_power_on(rport->phy);
+ rport->state = OTG_STATE_B_PERIPHERAL;
+ notify_charger = true;
+ sch_work = true;
+ cable = EXTCON_CHG_USB_SDP;
+ break;
+ case POWER_SUPPLY_TYPE_USB_DCP:
+ dev_dbg(&rport->phy->dev,
+ "dcp cable is connecetd\n");
+ rockchip_usb2phy_power_off(rport->phy);
+ notify_charger = true;
+ sch_work = true;
+ cable = EXTCON_CHG_USB_DCP;
+ break;
+ case POWER_SUPPLY_TYPE_USB_CDP:
+ dev_dbg(&rport->phy->dev,
+ "cdp cable is connecetd\n");
+ rockchip_usb2phy_power_on(rport->phy);
+ rport->state = OTG_STATE_B_PERIPHERAL;
+ notify_charger = true;
+ sch_work = true;
+ cable = EXTCON_CHG_USB_CDP;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ } else {
+ notify_charger = true;
+ rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+ rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+ }
+
+ if (rport->vbus_attached != vbus_attach) {
+ rport->vbus_attached = vbus_attach;
+
+ if (notify_charger && rphy->edev)
+ extcon_set_cable_state_(rphy->edev,
+ cable, vbus_attach);
+ }
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ if (!vbus_attach) {
+ dev_dbg(&rport->phy->dev, "usb disconnect\n");
+ rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+ rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+ rport->state = OTG_STATE_B_IDLE;
+ delay = 0;
+ rockchip_usb2phy_power_off(rport->phy);
+ }
+ sch_work = true;
+ break;
+ case OTG_STATE_A_HOST:
+ if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) == 0) {
+ dev_dbg(&rport->phy->dev, "usb otg host disconnect\n");
+ rport->state = OTG_STATE_B_IDLE;
+ rockchip_usb2phy_power_off(rport->phy);
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (sch_work)
+ schedule_delayed_work(&rport->otg_sm_work, delay);
+}
+
+static const char *chg_to_string(enum power_supply_type chg_type)
+{
+ switch (chg_type) {
+ case POWER_SUPPLY_TYPE_USB:
+ return "USB_SDP_CHARGER";
+ case POWER_SUPPLY_TYPE_USB_DCP:
+ return "USB_DCP_CHARGER";
+ case POWER_SUPPLY_TYPE_USB_CDP:
+ return "USB_CDP_CHARGER";
+ default:
+ return "INVALID_CHARGER";
+ }
+}
+
+static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy,
+ bool en)
+{
+ property_enable(rphy, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en);
+ property_enable(rphy, &rphy->phy_cfg->chg_det.idp_src_en, en);
+}
+
+static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy,
+ bool en)
+{
+ property_enable(rphy, &rphy->phy_cfg->chg_det.vdp_src_en, en);
+ property_enable(rphy, &rphy->phy_cfg->chg_det.idm_sink_en, en);
+}
+
+static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy,
+ bool en)
+{
+ property_enable(rphy, &rphy->phy_cfg->chg_det.vdm_src_en, en);
+ property_enable(rphy, &rphy->phy_cfg->chg_det.idp_sink_en, en);
+}
+
+#define CHG_DCD_POLL_TIME (100 * HZ / 1000)
+#define CHG_DCD_MAX_RETRIES 6
+#define CHG_PRIMARY_DET_TIME (40 * HZ / 1000)
+#define CHG_SECONDARY_DET_TIME (40 * HZ / 1000)
+static void rockchip_chg_detect_work(struct work_struct *work)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(work, struct rockchip_usb2phy_port, chg_work.work);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+ bool is_dcd, tmout, vout;
+ unsigned long delay;
+
+ dev_dbg(&rport->phy->dev, "chg detection work state = %d\n",
+ rphy->chg_state);
+ switch (rphy->chg_state) {
+ case USB_CHG_STATE_UNDEFINED:
+ if (!rport->suspended)
+ rockchip_usb2phy_power_off(rport->phy);
+ /* put the controller in non-driving mode */
+ property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, false);
+ /* Start DCD processing stage 1 */
+ rockchip_chg_enable_dcd(rphy, true);
+ rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
+ rphy->dcd_retries = 0;
+ delay = CHG_DCD_POLL_TIME;
+ break;
+ case USB_CHG_STATE_WAIT_FOR_DCD:
+ /* get data contact detection status */
+ is_dcd = property_enabled(rphy, &rphy->phy_cfg->chg_det.dp_det);
+ tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES;
+ /* stage 2 */
+ if (is_dcd || tmout) {
+ /* stage 4 */
+ /* Turn off DCD circuitry */
+ rockchip_chg_enable_dcd(rphy, false);
+ /* Voltage Source on DP, Probe on DM */
+ rockchip_chg_enable_primary_det(rphy, true);
+ delay = CHG_PRIMARY_DET_TIME;
+ rphy->chg_state = USB_CHG_STATE_DCD_DONE;
+ } else {
+ /* stage 3 */
+ delay = CHG_DCD_POLL_TIME;
+ }
+ break;
+ case USB_CHG_STATE_DCD_DONE:
+ vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.cp_det);
+ rockchip_chg_enable_primary_det(rphy, false);
+ if (vout) {
+ /* Voltage Source on DM, Probe on DP */
+ rockchip_chg_enable_secondary_det(rphy, true);
+ delay = CHG_SECONDARY_DET_TIME;
+ rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE;
+ } else {
+ if (tmout) {
+ /* floating charger found */
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
+ rphy->chg_state = USB_CHG_STATE_DETECTED;
+ delay = 0;
+ } else {
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB;
+ rphy->chg_state = USB_CHG_STATE_DETECTED;
+ delay = 0;
+ }
+ }
+ break;
+ case USB_CHG_STATE_PRIMARY_DONE:
+ vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.dcp_det);
+ /* Turn off voltage source */
+ rockchip_chg_enable_secondary_det(rphy, false);
+ if (vout)
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
+ else
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB_CDP;
+ /* fall through */
+ case USB_CHG_STATE_SECONDARY_DONE:
+ rphy->chg_state = USB_CHG_STATE_DETECTED;
+ delay = 0;
+ /* fall through */
+ case USB_CHG_STATE_DETECTED:
+ /* put the controller in normal mode */
+ property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, true);
+ rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
+ dev_info(&rport->phy->dev, "charger = %s\n",
+ chg_to_string(rphy->chg_type));
+ return;
+ default:
+ return;
+ }
+
+ schedule_delayed_work(&rport->chg_work, delay);
+}
+
/*
* The function manage host-phy port state and suspend/resume phy port
* to save power.
@@ -485,6 +884,26 @@ static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
return IRQ_HANDLED;
}
+static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy_port *rport = data;
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+ if (!property_enabled(rphy, &rport->port_cfg->bvalid_det_st))
+ return IRQ_NONE;
+
+ mutex_lock(&rport->mutex);
+
+ /* clear bvalid detect irq pending status */
+ property_enable(rphy, &rport->port_cfg->bvalid_det_clr, true);
+
+ mutex_unlock(&rport->mutex);
+
+ rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
+
+ return IRQ_HANDLED;
+}
+
static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
struct rockchip_usb2phy_port *rport,
struct device_node *child_np)
@@ -509,13 +928,86 @@ static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
IRQF_ONESHOT,
"rockchip_usb2phy", rport);
if (ret) {
- dev_err(rphy->dev, "failed to request irq handle\n");
+ dev_err(rphy->dev, "failed to request linestate irq handle\n");
return ret;
}
return 0;
}
+static int rockchip_otg_event(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(nb, struct rockchip_usb2phy_port, event_nb);
+
+ schedule_delayed_work(&rport->otg_sm_work, OTG_SCHEDULE_DELAY);
+
+ return NOTIFY_DONE;
+}
+
+static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
+ struct rockchip_usb2phy_port *rport,
+ struct device_node *child_np)
+{
+ int ret;
+
+ rport->port_id = USB2PHY_PORT_OTG;
+ rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
+ rport->state = OTG_STATE_UNDEFINED;
+
+ /*
+ * set suspended flag to true, but actually don't
+ * put phy in suspend mode, it aims to enable usb
+ * phy and clock in power_on() called by usb controller
+ * driver during probe.
+ */
+ rport->suspended = true;
+ rport->vbus_attached = false;
+
+ mutex_init(&rport->mutex);
+
+ rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1);
+ if (rport->mode == USB_DR_MODE_HOST) {
+ ret = 0;
+ goto out;
+ }
+
+ INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work);
+ INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work);
+
+ rport->utmi_avalid =
+ of_property_read_bool(child_np, "rockchip,utmi-avalid");
+
+ rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
+ if (rport->bvalid_irq < 0) {
+ dev_err(rphy->dev, "no vbus valid irq provided\n");
+ ret = rport->bvalid_irq;
+ goto out;
+ }
+
+ ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq, NULL,
+ rockchip_usb2phy_bvalid_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy_bvalid", rport);
+ if (ret) {
+ dev_err(rphy->dev, "failed to request otg-bvalid irq handle\n");
+ goto out;
+ }
+
+ if (!IS_ERR(rphy->edev)) {
+ rport->event_nb.notifier_call = rockchip_otg_event;
+
+ ret = extcon_register_notifier(rphy->edev, EXTCON_USB_HOST,
+ &rport->event_nb);
+ if (ret)
+ dev_err(rphy->dev, "register USB HOST notifier failed\n");
+ }
+
+out:
+ return ret;
+}
+
static int rockchip_usb2phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -553,8 +1045,14 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
rphy->dev = dev;
phy_cfgs = match->data;
+ rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+ rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
platform_set_drvdata(pdev, rphy);
+ ret = rockchip_usb2phy_extcon_register(rphy);
+ if (ret)
+ return ret;
+
/* find out a proper config which can be matched with dt. */
index = 0;
while (phy_cfgs[index].reg) {
@@ -591,13 +1089,9 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
struct rockchip_usb2phy_port *rport = &rphy->ports[index];
struct phy *phy;
- /*
- * This driver aim to support both otg-port and host-port,
- * but unfortunately, the otg part is not ready in current,
- * so this comments and below codes are interim, which should
- * be changed after otg-port is supplied soon.
- */
- if (of_node_cmp(child_np->name, "host-port"))
+ /* This driver aims to support both otg-port and host-port */
+ if (of_node_cmp(child_np->name, "host-port") &&
+ of_node_cmp(child_np->name, "otg-port"))
goto next_child;
phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
@@ -610,9 +1104,18 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
rport->phy = phy;
phy_set_drvdata(rport->phy, rport);
- ret = rockchip_usb2phy_host_port_init(rphy, rport, child_np);
- if (ret)
- goto put_child;
+ /* initialize otg/host port separately */
+ if (!of_node_cmp(child_np->name, "host-port")) {
+ ret = rockchip_usb2phy_host_port_init(rphy, rport,
+ child_np);
+ if (ret)
+ goto put_child;
+ } else {
+ ret = rockchip_usb2phy_otg_port_init(rphy, rport,
+ child_np);
+ if (ret)
+ goto put_child;
+ }
next_child:
/* to prevent out of boundary */
@@ -654,10 +1157,18 @@ static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
{
- .reg = 0xe450,
+ .reg = 0xe450,
.num_ports = 2,
.clkout_ctl = { 0xe450, 4, 4, 1, 0 },
.port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0xe454, 1, 0, 2, 1 },
+ .bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 },
+ .bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 },
+ .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 },
+ .utmi_avalid = { 0xe2ac, 7, 7, 0, 1 },
+ .utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 },
+ },
[USB2PHY_PORT_HOST] = {
.phy_sus = { 0xe458, 1, 0, 0x2, 0x1 },
.ls_det_en = { 0xe3c0, 6, 6, 0, 1 },
@@ -667,12 +1178,32 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
.utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 }
}
},
+ .chg_det = {
+ .opmode = { 0xe454, 3, 0, 5, 1 },
+ .cp_det = { 0xe2ac, 2, 2, 0, 1 },
+ .dcp_det = { 0xe2ac, 1, 1, 0, 1 },
+ .dp_det = { 0xe2ac, 0, 0, 0, 1 },
+ .idm_sink_en = { 0xe450, 8, 8, 0, 1 },
+ .idp_sink_en = { 0xe450, 7, 7, 0, 1 },
+ .idp_src_en = { 0xe450, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0xe450, 10, 10, 0, 1 },
+ .vdm_src_en = { 0xe450, 12, 12, 0, 1 },
+ .vdp_src_en = { 0xe450, 11, 11, 0, 1 },
+ },
},
{
- .reg = 0xe460,
+ .reg = 0xe460,
.num_ports = 2,
.clkout_ctl = { 0xe460, 4, 4, 1, 0 },
.port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0xe464, 1, 0, 2, 1 },
+ .bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 },
+ .bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 },
+ .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 },
+ .utmi_avalid = { 0xe2ac, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 },
+ },
[USB2PHY_PORT_HOST] = {
.phy_sus = { 0xe468, 1, 0, 0x2, 0x1 },
.ls_det_en = { 0xe3c0, 11, 11, 0, 1 },
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
