2016-11-03 13:26 GMT+01:00 Mirza Krak <mirza.krak@xxxxxxxxx>: > 2016-11-03 11:06 GMT+01:00 Jon Hunter <jonathanh@xxxxxxxxxx>: >> Hi Mirza, >> >> On 27/10/16 15:01, Mirza Krak wrote: >>> >>> From: Mirza Krak <mirza.krak@xxxxxxxxx> >>> >>> Add TEGRA20_CLK_NOR to init table and set default rate to 92 MHz which >>> is max rate. >>> >>> The maximum rate value of 92 MHz is pulled from the downstream L4T >>> kernel. >> >> >> Thanks for adding this. I assume that this is from an L4T r16 release with a >> v3.1 kernel. I had a quick poke through the kernel sources for v3.1 but was >> unable to see where this is set. Obviously v3.1 did not have CCF and so >> everything seems to be in the arch/arm/mach-tegra directory for setting up >> clocks. Can you point me to the appropriate sources so I can ACK this? > > I use the kernel sources provided by Toradex, and these sources are > based on L4T r16 release. > > http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra2_clocks.c?h=tegra#n2463 Ops, pre-mature send. I also added Marcel from Toradex on CC. The link to the source are [1] for Tegra2 and [2] for Tegra3. [1]. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra2_clocks.c?h=tegra#n2463 [2]. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra3_clocks.c?h=tegra#n4353 Best Regards Mirza -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html