Re: [PATCH V3 1/6] clk: tegra: add TEGRA20_CLK_NOR to init table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Mirza,

On 27/10/16 15:01, Mirza Krak wrote:
From: Mirza Krak <mirza.krak@xxxxxxxxx>

Add TEGRA20_CLK_NOR to init table and set default rate to 92 MHz which
is max rate.

The maximum rate value of 92 MHz is pulled from the downstream L4T
kernel.

Thanks for adding this. I assume that this is from an L4T r16 release with a v3.1 kernel. I had a quick poke through the kernel sources for v3.1 but was unable to see where this is set. Obviously v3.1 did not have CCF and so everything seems to be in the arch/arm/mach-tegra directory for setting up clocks. Can you point me to the appropriate sources so I can ACK this?

Cheers
Jon

--
nvpublic
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux