2016-11-03 11:06 GMT+01:00 Jon Hunter <jonathanh@xxxxxxxxxx>: > Hi Mirza, > > On 27/10/16 15:01, Mirza Krak wrote: >> >> From: Mirza Krak <mirza.krak@xxxxxxxxx> >> >> Add TEGRA20_CLK_NOR to init table and set default rate to 92 MHz which >> is max rate. >> >> The maximum rate value of 92 MHz is pulled from the downstream L4T >> kernel. > > > Thanks for adding this. I assume that this is from an L4T r16 release with a > v3.1 kernel. I had a quick poke through the kernel sources for v3.1 but was > unable to see where this is set. Obviously v3.1 did not have CCF and so > everything seems to be in the arch/arm/mach-tegra directory for setting up > clocks. Can you point me to the appropriate sources so I can ACK this? I use the kernel sources provided by Toradex, and these sources are based on L4T r16 release. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra2_clocks.c?h=tegra#n2463 Best Regards Mirza Krak -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
