From: Mirza Krak <mirza.krak@xxxxxxxxx>
Add TEGRA30_CLK_NOR to init table and set default rate to 127 MHz which
is max rate.
The maximum rate value of 127 MHz is pulled from the downstream L4T
kernel.
Signed-off-by: Mirza Krak <mirza.krak@xxxxxxxxx>
Tested-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board
---
Changes in v2:
- no changes
Changes in v3:
- Added comment in commit message where I got the maximum rates from.
drivers/clk/tegra/clk-tegra30.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 8e2db5e..67f1677 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1252,6 +1252,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
{ TEGRA30_CLK_SDMMC1, TEGRA30_CLK_PLL_P, 48000000, 0 },
{ TEGRA30_CLK_SDMMC2, TEGRA30_CLK_PLL_P, 48000000, 0 },
{ TEGRA30_CLK_SDMMC3, TEGRA30_CLK_PLL_P, 48000000, 0 },
+ { TEGRA30_CLK_NOR, TEGRA30_CLK_PLL_P, 127000000, 0 },
{ TEGRA30_CLK_PLL_M, TEGRA30_CLK_CLK_MAX, 0, 1 },
{ TEGRA30_CLK_PCLK, TEGRA30_CLK_CLK_MAX, 0, 1 },
{ TEGRA30_CLK_CSITE, TEGRA30_CLK_CLK_MAX, 0, 1 },
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
