Register offset management rework to support both
stm32f4 (default) and stm32f7. Driver rework to
ensure same functional level on both stm32f4 and
stm32f7: no new feature in this version yet.
Signed-off-by: Gerald Baeza <gerald.baeza@xxxxxx>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@xxxxxx>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index f89d1f7..e7ffd01 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1,6 +1,7 @@
/*
* Copyright (C) Maxime Coquelin 2015
- * Author: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
+ * Authors: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
+ * Gerald Baeza <gerald.baeza@xxxxxx>
* License terms: GNU General Public License (GPL), version 2
*
* Inspired by st-asc.c from STMicroelectronics (c)
@@ -29,16 +30,74 @@
#define DRIVER_NAME "stm32-usart"
+struct stm32_usart_offsets {
+ u8 cr1;
+ u8 cr2;
+ u8 cr3;
+ u8 brr;
+ u8 gtpr;
+ u8 rtor;
+ u8 rqr;
+ u8 isr;
+ u8 icr;
+ u8 rdr;
+ u8 tdr;
+};
+
+struct stm32_usart_config {
+ u8 uart_enable_bit; /* USART_CR1_UE */
+ bool has_7bits_data;
+};
+
+struct stm32_usart_info {
+ struct stm32_usart_offsets ofs;
+ struct stm32_usart_config cfg;
+};
+
+#define UNDEF_REG ~0
+
/* Register offsets */
-#define USART_SR 0x00
-#define USART_DR 0x04
-#define USART_BRR 0x08
-#define USART_CR1 0x0c
-#define USART_CR2 0x10
-#define USART_CR3 0x14
-#define USART_GTPR 0x18
-
-/* USART_SR */
+struct stm32_usart_info stm32f4_info = {
+ .ofs = {
+ .isr = 0x00,
+ .rdr = 0x04,
+ .tdr = 0x04,
+ .brr = 0x08,
+ .cr1 = 0x0c,
+ .cr2 = 0x10,
+ .cr3 = 0x14,
+ .gtpr = 0x18,
+ .rtor = UNDEF_REG,
+ .rqr = UNDEF_REG,
+ .icr = UNDEF_REG,
+ },
+ .cfg = {
+ .uart_enable_bit = 13,
+ .has_7bits_data = false,
+ }
+};
+
+struct stm32_usart_info stm32f7_info = {
+ .ofs = {
+ .cr1 = 0x00,
+ .cr2 = 0x04,
+ .cr3 = 0x08,
+ .brr = 0x0c,
+ .gtpr = 0x10,
+ .rtor = 0x14,
+ .rqr = 0x18,
+ .isr = 0x1c,
+ .icr = 0x20,
+ .rdr = 0x24,
+ .tdr = 0x28,
+ },
+ .cfg = {
+ .uart_enable_bit = 0,
+ .has_7bits_data = true,
+ }
+};
+
+/* USART_SR (F4) / USART_ISR (F7) */
#define USART_SR_PE BIT(0)
#define USART_SR_FE BIT(1)
#define USART_SR_NF BIT(2)
@@ -48,7 +107,16 @@
#define USART_SR_TC BIT(6)
#define USART_SR_TXE BIT(7)
#define USART_SR_LBD BIT(8)
-#define USART_SR_CTS BIT(9)
+#define USART_SR_CTSIF BIT(9)
+#define USART_SR_CTS BIT(10) /* F7 */
+#define USART_SR_RTOF BIT(11) /* F7 */
+#define USART_SR_EOBF BIT(12) /* F7 */
+#define USART_SR_ABRE BIT(14) /* F7 */
+#define USART_SR_ABRF BIT(15) /* F7 */
+#define USART_SR_BUSY BIT(16) /* F7 */
+#define USART_SR_CMF BIT(17) /* F7 */
+#define USART_SR_SBKF BIT(18) /* F7 */
+#define USART_SR_TEACK BIT(21) /* F7 */
#define USART_SR_ERR_MASK (USART_SR_LBD | USART_SR_ORE | \
USART_SR_FE | USART_SR_PE)
/* Dummy bits */
@@ -64,7 +132,7 @@
/* USART_CR1 */
#define USART_CR1_SBK BIT(0)
-#define USART_CR1_RWU BIT(1)
+#define USART_CR1_RWU BIT(1) /* F4 */
#define USART_CR1_RE BIT(2)
#define USART_CR1_TE BIT(3)
#define USART_CR1_IDLEIE BIT(4)
@@ -76,12 +144,20 @@
#define USART_CR1_PCE BIT(10)
#define USART_CR1_WAKE BIT(11)
#define USART_CR1_M BIT(12)
-#define USART_CR1_UE BIT(13)
+#define USART_CR1_M0 BIT(12) /* F7 */
+#define USART_CR1_MME BIT(13) /* F7 */
+#define USART_CR1_CMIE BIT(14) /* F7 */
#define USART_CR1_OVER8 BIT(15)
-#define USART_CR1_IE_MASK GENMASK(8, 4)
+#define USART_CR1_DEDT_MASK GENMASK(20, 16) /* F7 */
+#define USART_CR1_DEAT_MASK GENMASK(25, 21) /* F7 */
+#define USART_CR1_RTOIE BIT(26) /* F7 */
+#define USART_CR1_EOBIE BIT(27) /* F7 */
+#define USART_CR1_M1 BIT(28) /* F7 */
+#define USART_CR1_IE_MASK (GENMASK(8, 4) | BIT(14) | BIT(26) | BIT(27))
/* USART_CR2 */
-#define USART_CR2_ADD_MASK GENMASK(3, 0)
+#define USART_CR2_ADD_MASK GENMASK(3, 0) /* F4 */
+#define USART_CR2_ADDM7 BIT(4) /* F7 */
#define USART_CR2_LBDL BIT(5)
#define USART_CR2_LBDIE BIT(6)
#define USART_CR2_LBCL BIT(8)
@@ -91,6 +167,15 @@
#define USART_CR2_STOP_2B BIT(13)
#define USART_CR2_STOP_MASK GENMASK(13, 12)
#define USART_CR2_LINEN BIT(14)
+#define USART_CR2_SWAP BIT(15) /* F7 */
+#define USART_CR2_RXINV BIT(16) /* F7 */
+#define USART_CR2_TXINV BIT(17) /* F7 */
+#define USART_CR2_DATAINV BIT(18) /* F7 */
+#define USART_CR2_MSBFIRST BIT(19) /* F7 */
+#define USART_CR2_ABREN BIT(20) /* F7 */
+#define USART_CR2_ABRMOD_MASK GENMASK(22, 21) /* F7 */
+#define USART_CR2_RTOEN BIT(23) /* F7 */
+#define USART_CR2_ADD_F7_MASK GENMASK(31, 24) /* F7 */
/* USART_CR3 */
#define USART_CR3_EIE BIT(0)
@@ -105,18 +190,47 @@
#define USART_CR3_CTSE BIT(9)
#define USART_CR3_CTSIE BIT(10)
#define USART_CR3_ONEBIT BIT(11)
+#define USART_CR3_OVRDIS BIT(12) /* F7 */
+#define USART_CR3_DDRE BIT(13) /* F7 */
+#define USART_CR3_DEM BIT(14) /* F7 */
+#define USART_CR3_DEP BIT(15) /* F7 */
+#define USART_CR3_SCARCNT_MASK GENMASK(19, 17) /* F7 */
/* USART_GTPR */
#define USART_GTPR_PSC_MASK GENMASK(7, 0)
#define USART_GTPR_GT_MASK GENMASK(15, 8)
-#define DRIVER_NAME "stm32-usart"
+/* USART_RTOR */
+#define USART_RTOR_RTO_MASK GENMASK(23, 0) /* F7 */
+#define USART_RTOR_BLEN_MASK GENMASK(31, 24) /* F7 */
+
+/* USART_RQR */
+#define USART_RQR_ABRRQ BIT(0) /* F7 */
+#define USART_RQR_SBKRQ BIT(1) /* F7 */
+#define USART_RQR_MMRQ BIT(2) /* F7 */
+#define USART_RQR_RXFRQ BIT(3) /* F7 */
+#define USART_RQR_TXFRQ BIT(4) /* F7 */
+
+/* USART_ICR */
+#define USART_ICR_PECF BIT(0) /* F7 */
+#define USART_ICR_FFECF BIT(1) /* F7 */
+#define USART_ICR_NCF BIT(2) /* F7 */
+#define USART_ICR_ORECF BIT(3) /* F7 */
+#define USART_ICR_IDLECF BIT(4) /* F7 */
+#define USART_ICR_TCCF BIT(6) /* F7 */
+#define USART_ICR_LBDCF BIT(8) /* F7 */
+#define USART_ICR_CTSCF BIT(9) /* F7 */
+#define USART_ICR_RTOCF BIT(11) /* F7 */
+#define USART_ICR_EOBCF BIT(12) /* F7 */
+#define USART_ICR_CMCF BIT(17) /* F7 */
+
#define STM32_SERIAL_NAME "ttyS"
#define STM32_MAX_PORTS 6
struct stm32_port {
struct uart_port port;
struct clk *clk;
+ struct stm32_usart_info *info;
bool hw_flow_control;
};
@@ -151,6 +265,8 @@ static void stm32_clr_bits(struct uart_port *port, u32 reg, u32 bits)
static void stm32_receive_chars(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
unsigned long c;
u32 sr;
char flag;
@@ -158,9 +274,9 @@ static void stm32_receive_chars(struct uart_port *port)
if (port->irq_wake)
pm_wakeup_event(tport->tty->dev, 0);
- while ((sr = readl_relaxed(port->membase + USART_SR)) & USART_SR_RXNE) {
+ while ((sr = readl_relaxed(port->membase + ofs->isr)) & USART_SR_RXNE) {
sr |= USART_SR_DUMMY_RX;
- c = readl_relaxed(port->membase + USART_DR);
+ c = readl_relaxed(port->membase + ofs->rdr);
flag = TTY_NORMAL;
port->icount.rx++;
@@ -170,6 +286,10 @@ static void stm32_receive_chars(struct uart_port *port)
if (uart_handle_break(port))
continue;
} else if (sr & USART_SR_ORE) {
+ if (ofs->icr != UNDEF_REG)
+ writel_relaxed(USART_ICR_ORECF,
+ port->membase +
+ ofs->icr);
port->icount.overrun++;
} else if (sr & USART_SR_PE) {
port->icount.parity++;
@@ -199,10 +319,12 @@ static void stm32_receive_chars(struct uart_port *port)
static void stm32_transmit_chars(struct uart_port *port)
{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct circ_buf *xmit = &port->state->xmit;
if (port->x_char) {
- writel_relaxed(port->x_char, port->membase + USART_DR);
+ writel_relaxed(port->x_char, port->membase + ofs->tdr);
port->x_char = 0;
port->icount.tx++;
return;
@@ -218,7 +340,7 @@ static void stm32_transmit_chars(struct uart_port *port)
return;
}
- writel_relaxed(xmit->buf[xmit->tail], port->membase + USART_DR);
+ writel_relaxed(xmit->buf[xmit->tail], port->membase + ofs->tdr);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
@@ -232,11 +354,13 @@ static void stm32_transmit_chars(struct uart_port *port)
static irqreturn_t stm32_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
u32 sr;
spin_lock(&port->lock);
- sr = readl_relaxed(port->membase + USART_SR);
+ sr = readl_relaxed(port->membase + ofs->isr);
if (sr & USART_SR_RXNE)
stm32_receive_chars(port);
@@ -251,15 +375,21 @@ static irqreturn_t stm32_interrupt(int irq, void *ptr)
static unsigned int stm32_tx_empty(struct uart_port *port)
{
- return readl_relaxed(port->membase + USART_SR) & USART_SR_TXE;
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+
+ return readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE;
}
static void stm32_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+
if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
- stm32_set_bits(port, USART_CR3, USART_CR3_RTSE);
+ stm32_set_bits(port, ofs->cr3, USART_CR3_RTSE);
else
- stm32_clr_bits(port, USART_CR3, USART_CR3_RTSE);
+ stm32_clr_bits(port, ofs->cr3, USART_CR3_RTSE);
}
static unsigned int stm32_get_mctrl(struct uart_port *port)
@@ -271,44 +401,56 @@ static unsigned int stm32_get_mctrl(struct uart_port *port)
/* Transmit stop */
static void stm32_stop_tx(struct uart_port *port)
{
- stm32_clr_bits(port, USART_CR1, USART_CR1_TXEIE);
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+
+ stm32_clr_bits(port, ofs->cr1, USART_CR1_TXEIE);
}
/* There are probably characters waiting to be transmitted. */
static void stm32_start_tx(struct uart_port *port)
{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct circ_buf *xmit = &port->state->xmit;
if (uart_circ_empty(xmit))
return;
- stm32_set_bits(port, USART_CR1, USART_CR1_TXEIE | USART_CR1_TE);
+ stm32_set_bits(port, ofs->cr1, USART_CR1_TXEIE | USART_CR1_TE);
}
/* Throttle the remote when input buffer is about to overflow. */
static void stm32_throttle(struct uart_port *port)
{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
- stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
+ stm32_clr_bits(port, ofs->cr1, USART_CR1_RXNEIE);
spin_unlock_irqrestore(&port->lock, flags);
}
/* Unthrottle the remote, the input buffer can now accept data. */
static void stm32_unthrottle(struct uart_port *port)
{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
- stm32_set_bits(port, USART_CR1, USART_CR1_RXNEIE);
+ stm32_set_bits(port, ofs->cr1, USART_CR1_RXNEIE);
spin_unlock_irqrestore(&port->lock, flags);
}
/* Receive stop */
static void stm32_stop_rx(struct uart_port *port)
{
- stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+
+ stm32_clr_bits(port, ofs->cr1, USART_CR1_RXNEIE);
}
/* Handle breaks - ignored by us */
@@ -318,6 +460,8 @@ static void stm32_break_ctl(struct uart_port *port, int break_state)
static int stm32_startup(struct uart_port *port)
{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
const char *name = to_platform_device(port->dev)->name;
u32 val;
int ret;
@@ -327,17 +471,19 @@ static int stm32_startup(struct uart_port *port)
return ret;
val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
- stm32_set_bits(port, USART_CR1, val);
+ stm32_set_bits(port, ofs->cr1, val);
return 0;
}
static void stm32_shutdown(struct uart_port *port)
{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
u32 val;
val = USART_CR1_TXEIE | USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
- stm32_set_bits(port, USART_CR1, val);
+ stm32_set_bits(port, ofs->cr1, val);
free_irq(port->irq, port);
}
@@ -346,6 +492,8 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+ struct stm32_usart_config *cfg = &stm32_port->info->cfg;
unsigned int baud;
u32 usartdiv, mantissa, fraction, oversampling;
tcflag_t cflag = termios->c_cflag;
@@ -360,9 +508,10 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
spin_lock_irqsave(&port->lock, flags);
/* Stop serial port and reset value */
- writel_relaxed(0, port->membase + USART_CR1);
+ writel_relaxed(0, port->membase + ofs->cr1);
- cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_UE | USART_CR1_RXNEIE;
+ cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_RXNEIE;
+ cr1 |= BIT(cfg->uart_enable_bit);
cr2 = 0;
cr3 = 0;
@@ -371,8 +520,12 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
if (cflag & PARENB) {
cr1 |= USART_CR1_PCE;
- if ((cflag & CSIZE) == CS8)
- cr1 |= USART_CR1_M;
+ if ((cflag & CSIZE) == CS8) {
+ if (cfg->has_7bits_data)
+ cr1 |= USART_CR1_M0;
+ else
+ cr1 |= USART_CR1_M;
+ }
}
if (cflag & PARODD)
@@ -394,15 +547,15 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
*/
if (usartdiv < 16) {
oversampling = 8;
- stm32_set_bits(port, USART_CR1, USART_CR1_OVER8);
+ stm32_set_bits(port, ofs->cr1, USART_CR1_OVER8);
} else {
oversampling = 16;
- stm32_clr_bits(port, USART_CR1, USART_CR1_OVER8);
+ stm32_clr_bits(port, ofs->cr1, USART_CR1_OVER8);
}
mantissa = (usartdiv / oversampling) << USART_BRR_DIV_M_SHIFT;
fraction = usartdiv % oversampling;
- writel_relaxed(mantissa | fraction, port->membase + USART_BRR);
+ writel_relaxed(mantissa | fraction, port->membase + ofs->brr);
uart_update_timeout(port, cflag, baud);
@@ -430,9 +583,9 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
if ((termios->c_cflag & CREAD) == 0)
port->ignore_status_mask |= USART_SR_DUMMY_RX;
- writel_relaxed(cr3, port->membase + USART_CR3);
- writel_relaxed(cr2, port->membase + USART_CR2);
- writel_relaxed(cr1, port->membase + USART_CR1);
+ writel_relaxed(cr3, port->membase + ofs->cr3);
+ writel_relaxed(cr2, port->membase + ofs->cr2);
+ writel_relaxed(cr1, port->membase + ofs->cr1);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -469,6 +622,8 @@ static void stm32_pm(struct uart_port *port, unsigned int state,
{
struct stm32_port *stm32port = container_of(port,
struct stm32_port, port);
+ struct stm32_usart_offsets *ofs = &stm32port->info->ofs;
+ struct stm32_usart_config *cfg = &stm32port->info->cfg;
unsigned long flags = 0;
switch (state) {
@@ -477,7 +632,7 @@ static void stm32_pm(struct uart_port *port, unsigned int state,
break;
case UART_PM_STATE_OFF:
spin_lock_irqsave(&port->lock, flags);
- stm32_clr_bits(port, USART_CR1, USART_CR1_UE);
+ stm32_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
spin_unlock_irqrestore(&port->lock, flags);
clk_disable_unprepare(stm32port->clk);
break;
@@ -567,8 +722,10 @@ static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)
#ifdef CONFIG_OF
static const struct of_device_id stm32_match[] = {
- { .compatible = "st,stm32-usart", },
- { .compatible = "st,stm32-uart", },
+ { .compatible = "st,stm32-usart", .data = &stm32f4_info},
+ { .compatible = "st,stm32-uart", .data = &stm32f4_info},
+ { .compatible = "st,stm32f7-usart", .data = &stm32f7_info},
+ { .compatible = "st,stm32f7-uart", .data = &stm32f7_info},
{},
};
@@ -577,13 +734,20 @@ MODULE_DEVICE_TABLE(of, stm32_match);
static int stm32_serial_probe(struct platform_device *pdev)
{
- int ret;
+ const struct of_device_id *match;
struct stm32_port *stm32port;
+ int ret;
stm32port = stm32_of_get_stm32_port(pdev);
if (!stm32port)
return -ENODEV;
+ match = of_match_device(stm32_match, &pdev->dev);
+ if (match && match->data)
+ stm32port->info = (struct stm32_usart_info *)match->data;
+ else
+ return -EINVAL;
+
ret = stm32_init_port(stm32port, pdev);
if (ret)
return ret;
@@ -608,15 +772,20 @@ static int stm32_serial_remove(struct platform_device *pdev)
#ifdef CONFIG_SERIAL_STM32_CONSOLE
static void stm32_console_putchar(struct uart_port *port, int ch)
{
- while (!(readl_relaxed(port->membase + USART_SR) & USART_SR_TXE))
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
+
+ while (!(readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE))
cpu_relax();
- writel_relaxed(ch, port->membase + USART_DR);
+ writel_relaxed(ch, port->membase + ofs->tdr);
}
static void stm32_console_write(struct console *co, const char *s, unsigned cnt)
{
struct uart_port *port = &stm32_ports[co->index].port;
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
unsigned long flags;
u32 old_cr1, new_cr1;
int locked = 1;
@@ -630,14 +799,14 @@ static void stm32_console_write(struct console *co, const char *s, unsigned cnt)
spin_lock(&port->lock);
/* Save and disable interrupts */
- old_cr1 = readl_relaxed(port->membase + USART_CR1);
+ old_cr1 = readl_relaxed(port->membase + ofs->cr1);
new_cr1 = old_cr1 & ~USART_CR1_IE_MASK;
- writel_relaxed(new_cr1, port->membase + USART_CR1);
+ writel_relaxed(new_cr1, port->membase + ofs->cr1);
uart_console_write(port, s, cnt, stm32_console_putchar);
/* Restore interrupt state */
- writel_relaxed(old_cr1, port->membase + USART_CR1);
+ writel_relaxed(old_cr1, port->membase + ofs->cr1);
if (locked)
spin_unlock(&port->lock);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
