This adds documentation of device tree bindings for the
STM32 USART
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@xxxxxx>
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
new file mode 100644
index 0000000..75b1400
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -0,0 +1,34 @@
+* STMicroelectronics STM32 USART
+
+Required properties:
+- compatible: Can be either "st,stm32-usart", "st,stm32-uart",
+"st,stm32f7-usart" or "st,stm32f7-uart" depending on whether
+the device supports synchronous mode and is compatible with
+stm32(f4) or stm32f7.
+- reg: The address and length of the peripheral registers space
+- interrupts: The interrupt line of the USART instance
+- clocks: The input clock of the USART instance
+
+Optional properties:
+- pinctrl: The reference on the pins configuration
+- st,hw-flow-ctrl: bool flag to enable hardware flow control.
+
+Examples:
+usart4: serial@40004c00 {
+ compatible = "st,stm32-uart";
+ reg = <0x40004c00 0x400>;
+ interrupts = <52>;
+ clocks = <&clk_pclk1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart4>;
+};
+
+usart2: serial@40004400 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40004400 0x400>;
+ interrupts = <38>;
+ clocks = <&clk_pclk1>;
+ st,hw-flow-ctrl;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>;
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
