Re: [PATCH v4 17/17] usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/03/2013 08:37 AM, Peter Chen wrote:
> At very rare cases, the SoF will not send out after resume with
> low speed connection. The workaround is do not power down
> PWD.RXPWD1PT1 bit during the suspend.

Is this also a fix for newly added code? If so please also squash.

> Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> ---
>  drivers/usb/phy/phy-mxs-usb.c |   47 ++++++++++++++++++++++++++++++++++++++++-
>  1 files changed, 46 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index 542b6ec..5ae4a57 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -69,6 +69,9 @@
>  #define ANADIG_USB2_LOOPBACK_SET		0x244
>  #define ANADIG_USB2_LOOPBACK_CLR		0x248
>  
> +#define ANADIG_USB1_MISC			0x1f0
> +#define ANADIG_USB2_MISC			0x250
> +
>  #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	BIT(12)
>  #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
>  
> @@ -80,6 +83,11 @@
>  #define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1	BIT(2)
>  #define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN	BIT(5)
>  
> +#define BM_ANADIG_USB1_MISC_RX_VPIN_FS		BIT(29)
> +#define BM_ANADIG_USB1_MISC_RX_VMIN_FS		BIT(28)
> +#define BM_ANADIG_USB2_MISC_RX_VPIN_FS		BIT(29)
> +#define BM_ANADIG_USB2_MISC_RX_VMIN_FS		BIT(28)
> +
>  #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
>  
>  /* Do disconnection between PHY and controller without vbus */
> @@ -296,12 +304,49 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
>  	clk_disable_unprepare(mxs_phy->clk);
>  }
>  
> +static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
> +{
> +	unsigned int line_state;
> +	/* bit definition is the same for all controllers */
> +	unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
> +		     dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
> +	unsigned int reg = ANADIG_USB1_MISC;
> +
> +	/* If the SoCs don't have anatop, quit */
> +	if (!mxs_phy->regmap_anatop)
> +		return false;
> +
> +	if (mxs_phy->port_id == 0)
> +		reg = ANADIG_USB1_MISC;
> +	else if (mxs_phy->port_id == 1)
> +		reg = ANADIG_USB2_MISC;
> +
> +	regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
> +
> +	if ((line_state & (dp_bit | dm_bit)) ==  dm_bit)
> +		return true;
> +	else
> +		return false;
> +}
> +
>  static int mxs_phy_suspend(struct usb_phy *x, int suspend)
>  {
>  	struct mxs_phy *mxs_phy = to_mxs_phy(x);
> +	bool low_speed_connection, vbus_is_on;
> +
> +	low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
> +	vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
>  
>  	if (suspend) {
> -		writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
> +		/*
> +		 * FIXME: Do not power down RXPWD1PT1 bit for low speed

Is this FIXME still true?

> +		 * connect. The low speed connection will have problem at
> +		 * very rare cases during usb suspend and resume process.
> +		 */
> +		if (low_speed_connection & vbus_is_on)
> +			writel(0xfffbffff, x->io_priv + HW_USBPHY_PWD);
> +		else
> +			writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
>  		writel(BM_USBPHY_CTRL_CLKGATE,
>  		       x->io_priv + HW_USBPHY_CTRL_SET);
>  		clk_disable_unprepare(mxs_phy->clk);
> 

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux