Hi Felipe & Shawn, The serial adds power management support for MXS PHY, it includes: - Add three common PHY APIs, .set_wakeup, .notify_suspend, notify_resume. - Related above API implementation at mxs phy driver - misc changes and bug fixes for mxs phy to support low power mode and wakeup. It is based on Greg's usb-next, 3.13-rc1. Changes for v4: - Using MXS_PHY_HAS_ANATOP to indicate which platform has anatop module - Using mxs_phy_data to instead of mxs_phy_platform_flag - Create is_xxx_phy() MACRO - Add imx6sl support, and pass the test [5/17] - Add one additional binding doc for compatible string [1/17] - Introduce controller id to access un-regulator register region [14/17] [15/17] - Add waiting stable time before phy clock switches to AHB clock (from 32K) [13/17] - Fix one problem that only using the 1st controller register at mxs_phy_disconnect_line [16/17] - Fix one problem for low speed connection at very rare cases [17/17] - Some typos Changes for v3: - Using flag bit to indicate SoC features/bugs, so we can remove platform_device_id. - Remove 3 unnecessary dts/doc patches due to above change - Several comment change Changes for v2: - Add missing patches which introduce platform judgement code [1/14,2/14] - re-order the patch sequence, like doc->dts->source file, the reviewers can know the meaning of dt properties before review source - Add description of two IC problems exsiting at mxs PHY; change "high speed" to "HS" and "non-high speed" to "FS/LS" [5/14] - Change the dt property disconnect-line-without-vbus that the separator should be "-" not the "_", meanwhile, related source code has changed. - Using one local variable to get the function return val to avoid long condition statement. [13/14] Peter Chen (17): usb: doc: phy-mxs: Add more compatible strings usb: phy-mxs: Add platform judgement code usb: phy-mxs: Add auto clock and power setting usb: doc: phy-mxs: update binding for adding anatop phandle ARM: dts: imx6: add anatop phandle for usbphy usb: phy-mxs: Add anatop regmap usb: phy: add notify suspend and resume callback usb: phy-mxs: Add implementation of nofity_suspend and notify_resume usb: phy-mxs: Enable IC fixes for related SoCs usb: phy: Add set_wakeup API usb: phy-mxs: Add implementation of set_wakeup usb: phy-mxs: Add system suspend/resume API usb: phy-mxs: Add sync time after controller clear phcd ARM: dts: imx: add mxs phy controller id usb: phy-mxs: add controller id usb: phy-mxs: fix the problem by only using 1st controller's register usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection Documentation/devicetree/bindings/usb/mxs-phy.txt | 5 +- arch/arm/boot/dts/imx23.dtsi | 1 + arch/arm/boot/dts/imx28.dtsi | 2 + arch/arm/boot/dts/imx6qdl.dtsi | 4 + arch/arm/boot/dts/imx6sl.dtsi | 4 + drivers/usb/phy/phy-mxs-usb.c | 398 ++++++++++++++++++++- include/linux/usb/phy.h | 39 ++ 7 files changed, 437 insertions(+), 16 deletions(-) -- 1.7.8 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
