[PATCH v4 11/17] usb: phy-mxs: Add implementation of set_wakeup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




When we need the PHY can be waken up by external signals,
we can call this API. Besides, we call mxs_phy_disconnect_line
at this API to close the connection between USB PHY and
controller, after that, the line state from controller is SE0.
Once the PHY is out of power, without calling mxs_phy_disconnect_line,
there are unknown wakeups due to dp/dm floating at device mode.

Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
 drivers/usb/phy/phy-mxs-usb.c |   79 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 79 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 0908d74..84680e3 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -31,6 +31,9 @@
 #define HW_USBPHY_CTRL_SET			0x34
 #define HW_USBPHY_CTRL_CLR			0x38
 
+#define HW_USBPHY_DEBUG_SET			0x54
+#define HW_USBPHY_DEBUG_CLR			0x58
+
 #define HW_USBPHY_IP				0x90
 #define HW_USBPHY_IP_SET			0x94
 #define HW_USBPHY_IP_CLR			0x98
@@ -39,6 +42,9 @@
 #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
 #define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE	BIT(25)
+#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP		BIT(23)
+#define BM_USBPHY_CTRL_ENIDCHG_WKUP		BIT(22)
+#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP		BIT(21)
 #define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD	BIT(20)
 #define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE	BIT(19)
 #define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL		BIT(18)
@@ -48,6 +54,19 @@
 
 #define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
 
+#define BM_USBPHY_DEBUG_CLKGATE			BIT(30)
+
+/* Anatop Registers */
+#define ANADIG_USB1_VBUS_DET_STAT		0x1c0
+
+#define ANADIG_USB1_LOOPBACK_SET		0x1e4
+#define ANADIG_USB1_LOOPBACK_CLR		0x1e8
+
+#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
+
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1	BIT(2)
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN	BIT(5)
+
 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
 
 /* Do disconnection between PHY and controller without vbus */
@@ -146,6 +165,48 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 	return 0;
 }
 
+static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
+{
+	void __iomem *base = mxs_phy->phy.io_priv;
+	bool vbus_is_on = false;
+	static bool line_is_disconnected;
+	unsigned int vbus_value = 0;
+
+	/* If the SoCs don't need to disconnect line without vbus, quit */
+	if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
+		return;
+
+	/* If the SoCs don't have anatop, quit */
+	if (!mxs_phy->regmap_anatop)
+		return;
+
+	regmap_read(mxs_phy->regmap_anatop, ANADIG_USB1_VBUS_DET_STAT,
+			&vbus_value);
+	if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
+		vbus_is_on = true;
+
+	if (on && !vbus_is_on) {
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+			base + HW_USBPHY_DEBUG_CLR);
+		regmap_write(mxs_phy->regmap_anatop, ANADIG_USB1_LOOPBACK_SET,
+				BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
+				BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
+		/* Delay some time, and let Linestate be SE0 for controller */
+		usleep_range(500, 1000);
+		line_is_disconnected = true;
+	} else if (line_is_disconnected) {
+		regmap_write(mxs_phy->regmap_anatop, ANADIG_USB1_LOOPBACK_CLR,
+				BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
+				BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+				base + HW_USBPHY_DEBUG_SET);
+		line_is_disconnected = false;
+	}
+
+	dev_dbg(mxs_phy->phy.dev, "line is %s\n", line_is_disconnected
+			? "disconnected" : "connected");
+}
+
 static int mxs_phy_init(struct usb_phy *phy)
 {
 	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
@@ -183,6 +244,23 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 	return 0;
 }
 
+static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(x);
+	u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
+			BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
+				BM_USBPHY_CTRL_ENIDCHG_WKUP;
+	if (enabled) {
+		mxs_phy_disconnect_line(mxs_phy, true);
+		writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
+	} else {
+		writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
+		mxs_phy_disconnect_line(mxs_phy, false);
+	}
+
+	return 0;
+}
+
 static int mxs_phy_on_connect(struct usb_phy *phy,
 		enum usb_device_speed speed)
 {
@@ -289,6 +367,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	mxs_phy->phy.notify_connect	= mxs_phy_on_connect;
 	mxs_phy->phy.notify_disconnect	= mxs_phy_on_disconnect;
 	mxs_phy->phy.type		= USB_PHY_TYPE_USB2;
+	mxs_phy->phy.set_wakeup		= mxs_phy_set_wakeup;
 
 	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
 
-- 
1.7.8


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux