On 12/03/2013 08:36 AM, Peter Chen wrote:
> The mxs-phy has several bugs and features at different
> versions, the driver code can get it through of_device_id.data.
>
> Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> ---
> drivers/usb/phy/phy-mxs-usb.c | 58 ++++++++++++++++++++++++++++++++++------
> 1 files changed, 49 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index 545844b..f6cbc78 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -1,5 +1,5 @@
> /*
> - * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright 2012-2013 Freescale Semiconductor, Inc.
> * Copyright (C) 2012 Marek Vasut <marex@xxxxxxx>
> * on behalf of DENX Software Engineering GmbH
> *
> @@ -20,6 +20,7 @@
> #include <linux/delay.h>
> #include <linux/err.h>
> #include <linux/io.h>
> +#include <linux/of_device.h>
>
> #define DRIVER_NAME "mxs_phy"
>
> @@ -34,13 +35,55 @@
> #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
> #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
>
> +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
> +
> +/* Do disconnection between PHY and controller without vbus */
> +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0)
> +
> +/*
> + * The PHY will be in messy if there is an wakeup after putting
^^
a
Do you mean "messy state"?
> + * bus to suspend (set portsc.suspendM) but before setting PHY to low
> + * power mode (set portsc.phcd).
> + */
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Attachment:
signature.asc
Description: OpenPGP digital signature
