Hi Maxime, On 08/26/2016 04:10 PM, Maxime Ripard wrote:
Hi Milo, On Thu, Aug 25, 2016 at 03:44:54PM +0900, Milo Kim wrote:In H3, PA5 can be used as PWM and UART0. If the PWM is used, the console UART should be moved to other port. This patch enables UART1 pinctrl to support this case. PA5: PWM PG6, PG7: debug console Cc: Chen-Yu Tsai <wens@xxxxxxxx> Cc: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Signed-off-by: Milo Kim <woogyom.kim@xxxxxxxxx> --- arch/arm/boot/dts/sun8i-h3.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 3a965fb..fdb6801 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -526,6 +526,13 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + uart1_pins_a: uart1@0 { + allwinner,pins = "PG6", "PG7"; + allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +Our policy is that we don't introduce new pinctrl nodes that are not used by any board to avoid bloating the DT too much with unused nodes. If you have a board using it, please submit that change as well.
UART1 was already added in sun8i-h3.dtsi, so I drop this change in v2. Commit-ID: 966c11a3b5e4 Best regards, Milo -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
